Новини

Juergen Klinglhuber
Started this one.
The Ju 86 which were seen in 2 different Austrian markings, but at the end was never part of the Airforce. Here the overall silver Ju86 #311 at the airshow in Vienna-Aspern in early 1937.

Cuajete
Following 👍

Robert Podkoński
Interesting. Taking a seat here, of course!

Łukasz Gliński
Me 3 👍

Alec K
Me 4 🙂

Finn
I'm in

Dave Flitton
Watching!

Juergen Klinglhuber
Hello mates and thank you for your interest!

Juergen Klinglhuber
The mention aircraft was sent to the Airshow in Aspern as a "demonstrator" in austrian marking. Austria was interessed in buying 18 Ju86K-7. Due to several reasons Junkers was not prepared for that airshow and on short note removed the markings of an 86K-2 that was already prepared to be sold to Sweden. They put on austrian markings, a service number #311 and flew it over to Austria for just this one day. Flight captain Behrendt did a good job and the aerobatic air-display was a great success. So far so good. Why I am telling this? 86-K2 is a differend engine and cowling. The box is a 86E1/2. Aftermarket conversion products are out there (Kora) .....I had difficulties to locate/buy some.
Therefore: it is Scratchbuilding time again !!! 😎

Guy Rump
Following. 👍

Juergen Klinglhuber
Welcome Guy

Alec K
Nice progress. Modelimex is a place to get the Kora parts from, just in case 👍

Łukasz Gliński
There's one set here 😛
mojehobby.pl/product..I-Prewar-Bomber.html

Cuajete
Good explanation, Juergen 👍

Juergen Klinglhuber
thx Alec &Lukasz for you very kind support 👍 - appreciated.
But the first cuts are already done - no way back now 😉
(and I have to odmit: usually I like it to test my skills by a DIY task every now and then)

Bernd Grün
An Austrian Ju 86, I'm in! Nice start, Jürgen! 👍

Juergen Klinglhuber
Hi Bernd! thx

J35J
Great start! Watching with intrest.

Juergen Klinglhuber
Thank you and welcome J35J.

Stefan Fraundorfer
Ah, a new and very interesting project. Of course I will follow that. Have fun with the Ju 86 Jürgen.

Juergen Klinglhuber
Welcome aboard Stefan!

Juergen Klinglhuber
I have finished the modification on the engine resp. cowling. Some new pic's up-loaded.

Roland Sachsenhofer
Very interesting and extremely promising! We talked about it in Ried, and now I'm delighted to see these ideas being realised in such an impressive way!

Juergen Klinglhuber
🙏 Thx alot Roland, I am happy to receive your appreciation.

Nicolas
I'm joining this interesting build.

Łukasz Gliński
Impressive rework of the engines 👍

Alec K
I agree, looks very good 👍

TH SCALE MODELS (Thomas Haberl)
Nice progress Jürgen! I´m in to see how this beauty comes together 👍

Cuajete
Fantastic mods, 👌

Juergen Klinglhuber
Thank you mates for leaving your nice comments.Iam wWorking on the exhaust pipe currently. New picture up-date should be ready after this coming weekend.

Juergen Klinglhuber
All mod's are completted now - after adding the windows of the cockpit I can move it to the paint hangar.

Roland Sachsenhofer
Looks beautiful, clean and masterly done!

Juergen Klinglhuber
Hey - thank you Roland for your feedback. That gives motivation of course 🙂

Roland Sachsenhofer
That's great, that's how it should be, because your construction progress here gives me inspiration 🙂

Juergen Klinglhuber
Ju86 just left the paint hangar,...

Alec K
The metal finish looks great, has nice variation to it 👍

Thomas Kolb
I agree with Alec, the metal surface looks very realistic in the photos!

Cuajete
I agree with Alec and Thomas. Great metallized! 👍

Juergen Klinglhuber
Thank you Alec, Thomas & Cuajete. When I had finished I thought: "Grab, overdone. This bird was for sure not that worn as it went to the airshow more or less fresh from the manufacturer." But the more looked at it the more I was okay with the result. So your comments are welcome and soothe my concerns. 👍

Nicolas
Don't worry Juergen, even on new airplanes there are sometimes clear visual differences in the sheet metal. For example, some manufacturers deburr the rivet holes with a grinding machine, the sheets are made of different alloys or are applied with different rolling directions, all of which have an influence on the appearance. I like it.

Juergen Klinglhuber
Thx Nicolas !!

Flop_Se
Very nice so far! 👍🏻

Alex K
Intéressant! 👍

Zbynek Honzik
Taking a seat! 👍

Ronan
Following 😉

Ronan
Elles sont excellentes tes figurines 👍

Robert Podkoński
Fantastic job so far. Following!

Łukasz Gliński
No way these figures are 1/72, are you sure you picked the correct scale in the description? 😮

Eric Duval
Thank you so much. Yes it is really 1/72 😉

Pietro De Angelis
Great Humber, I have one in the stash too, when I get around to making it one day I hope it turns out half as good as yours!

Krzysztof Szymkiewicz
Thank you 😃 The model itself is very nice to build, the instructions are only sometimes unclear.

Olivier
Well done, Krzysztof ! Deserves a five star rating.

Doubtingmango
Brilliant painting!

Neuling
A masterpiece.

Michael Kohl
Anooother Spit. But, hey - that's one with an awesome paintjob. Top.

Jakub Chlodek
Thanks! appreciate!

J35J
Great build & paintjob!

gorby
Stunning painting and weathering!

Jakub Chlodek
Many thanks!

Doubtingmango
Fantastic! Those don't even look like decals

Mark Sherwood
A nice looking model. Detailing, crew and rendered wear and tear. Spot on. 👍🥸🤟

J35J
Beautiful build!👍🏻

Doubtingmango
Thanks Mark and J35J!

gorby
Excellent work!

Doubtingmango
Thanks Gorby!

Pietro De Angelis
Very nice work!

Doubtingmango
Thanks Pietro!

Doubtingmango
My tracks snapped overnight after the washed! I replaced them with old Tamiya tracks and added a recognition flag on the back (added pics)

Davide Vitali
Very nice! Please, note that the Italian flag in the ww2 was different in that it had the Royal family's icon on the white stripe

Doubtingmango
You are correct Davide! I attempted the correct flag multiple times with a print out, but the ink kept running. I used acrylic paint to do a simple Italian tricolor. Maybe the crew had a few too many close calls with the stukas and made their own simple tricolor?