Новини

Patryk S.
Following! Good luck!

J35J
Taking a chair!👍🏻

Łukasz Gliński
Me 3, I have to see that! Still procrastinating mine 😄
Thomas, are you considering getting rid of the decal with my support perhaps? 😉

Thomas Kolb
Łukasz, I am not going to use the provided decal sheet, so if you want it, just PM me with your address and I can post it.

Thomas Kolb
(And for everybody else with knowledge about the different versions of the Yak-12, yes, I am aware of the differences between the A-version in the kit and the R-version used by the Hungarian People's Army. But since I am not able to scratch build the entire wing and empennage structure, let's just call it artistic license.)

Cuajete
Looking good so far, Thomas 👍
Feel free to take artistic license 😉

Robert Podkoński
Watching for sure!

Alec K
Taking a seat, looks great 👍

Thomas Kolb
Thank you very much, dear gentlemen for your attention and encouraging words!

Michael Kohl
Following too

Nicolas
I'm joining in as well. Great build so far. 👍

Bruce Huxtable
Admiring your skills, and learning from your problem-solving, Thomas. Transforming an A-Model kit adds to the challenges 😉

Thomas Kolb
Thank you Michael, Nicolas & Bruce for your interest and compliments! This kit is actually not quite as bad as some other Amodel kits I have built - the designers have created some pretty nifty solutions here! If anything, it is a bit unforgiving - make one small mistake and you can be sure that it will keep coming back to kick you.

Łukasz Gliński
What a cool visor 👍

mhsuzuki
José,

Tenho interesse nesse aqui também, junto com o Yak-28 e o X-1.

Ken Kolenovsky
WoWsers! That is one helluva diorama Dave! Kudos!

Rafael Gonzalez
Stunning work 👌🏼👌🏼👌🏼

Doubtingmango
Excellent dio!

Mathias Decommere
Amazing Dio! Congratulations!

Logan Eden
Good Morning, Dave So, so interesting with something to catch the eye over the whole diorama!! Will this be going to Capital City Amps this month?? Catch Ya, Logan

Dave Hill
Thanks everyone! Logan, I'd love to take it to Edmonton for AMPS but that is a double wedding weekend for me.

Ken Kolenovsky
I thought you were already married Dave?! Who are the other 2 lucky women? LOL!

Neuling
Very good diorama! Is "Haus Hausbrot" a bakery or just the name of the shopkeeper?

gorby
Very impressive dio!

Dave Hill
Thanks Nueling! You are correct, it's a bakery.

Dave Hill
Good one Ken. Lol

Juergen Klinglhuber
Started this one.
The Ju 86 which were seen in 2 different Austrian markings, but at the end was never part of the Airforce. Here the overall silver Ju86 #311 at the airshow in Vienna-Aspern in early 1937.

Cuajete
Following 👍

Robert Podkoński
Interesting. Taking a seat here, of course!

Łukasz Gliński
Me 3 👍

Alec K
Me 4 🙂

Finn
I'm in

Dave Flitton
Watching!

Juergen Klinglhuber
Hello mates and thank you for your interest!

Juergen Klinglhuber
The mention aircraft was sent to the Airshow in Aspern as a "demonstrator" in austrian marking. Austria was interessed in buying 18 Ju86K-7. Due to several reasons Junkers was not prepared for that airshow and on short note removed the markings of an 86K-2 that was already prepared to be sold to Sweden. They put on austrian markings, a service number #311 and flew it over to Austria for just this one day. Flight captain Behrendt did a good job and the aerobatic air-display was a great success. So far so good. Why I am telling this? 86-K2 is a differend engine and cowling. The box is a 86E1/2. Aftermarket conversion products are out there (Kora) .....I had difficulties to locate/buy some.
Therefore: it is Scratchbuilding time again !!! 😎

Guy Rump
Following. 👍

Juergen Klinglhuber
Welcome Guy

Alec K
Nice progress. Modelimex is a place to get the Kora parts from, just in case 👍

Łukasz Gliński
There's one set here 😛
mojehobby.pl/product..I-Prewar-Bomber.html

Cuajete
Good explanation, Juergen 👍

Juergen Klinglhuber
thx Alec &Lukasz for you very kind support 👍 - appreciated.
But the first cuts are already done - no way back now 😉
(and I have to odmit: usually I like it to test my skills by a DIY task every now and then)

Bernd Grün
An Austrian Ju 86, I'm in! Nice start, Jürgen! 👍

Juergen Klinglhuber
Hi Bernd! thx

J35J
Great start! Watching with intrest.

Juergen Klinglhuber
Thank you and welcome J35J.

Stefan Fraundorfer
Ah, a new and very interesting project. Of course I will follow that. Have fun with the Ju 86 Jürgen.

Juergen Klinglhuber
Welcome aboard Stefan!

Juergen Klinglhuber
I have finished the modification on the engine resp. cowling. Some new pic's up-loaded.

Roland Sachsenhofer
Very interesting and extremely promising! We talked about it in Ried, and now I'm delighted to see these ideas being realised in such an impressive way!

Juergen Klinglhuber
🙏 Thx alot Roland, I am happy to receive your appreciation.

Nicolas
I'm joining this interesting build.

Łukasz Gliński
Impressive rework of the engines 👍

Alec K
I agree, looks very good 👍

TH SCALE MODELS (Thomas Haberl)
Nice progress Jürgen! I´m in to see how this beauty comes together 👍

Cuajete
Fantastic mods, 👌

Juergen Klinglhuber
Thank you mates for leaving your nice comments.Iam wWorking on the exhaust pipe currently. New picture up-date should be ready after this coming weekend.

Juergen Klinglhuber
All mod's are completted now - after adding the windows of the cockpit I can move it to the paint hangar.

Roland Sachsenhofer
Looks beautiful, clean and masterly done!

Juergen Klinglhuber
Hey - thank you Roland for your feedback. That gives motivation of course 🙂

Roland Sachsenhofer
That's great, that's how it should be, because your construction progress here gives me inspiration 🙂

Juergen Klinglhuber
Ju86 just left the paint hangar,...

Alec K
The metal finish looks great, has nice variation to it 👍

Florian H.
Da schau ich mal zu

Dave Flitton
Massive! where are you going to put it?

BAT21
Right next to my Mi-22 😉

Yellow 23 | Album by BAT21 (1:72)

Alec K
Another monster! I am in 👍

Nicolas
Ich nehm mir auch mal nen Stuhl.

BAT21
Welcome on board.

Thomas Kolb
Cool! This I just need to follow!

Robert Podkoński
Me too!

BAT21
I'm glad you're part of this project.

Robert Podkoński
I have uploaded a few photos of Polish Mi-6 before and after restoration here:
Once there was a collection | Album by podkon ; and here:
Polish Air Force Museum - Dęblin | Album by podkon. Perhaps you will find them useful.

BAT21
👍

Ekki
Watching.

Michael Kohl
BAT21 builds a chopper? Not without me!

BAT21
Thank you very much for your interest.

Pierre-Christian Baudru
Can't wait to see it finish !

Florian H.
Sehr schön, Gratulation zu diesem Ergebnis 👍

BAT21
Danke Florian.

Bernd Grün
Promising start. 👍🏻 Following with interest!

BAT21
It's nice that the audience seats are filling up.

Alec K
Solid progress 👍

Alexander Grivonev
Habe den Kit seit Jahren im Besitz, traue mich aber nicht ran. Was für ein Monster👍

BAT21
Wer bei der Tu 128 von Trumpeter alle Fehler in Perfektion beseitigt hat, muss sich nicht vor der Mi-6 fürchten.
Etwas Spachtelmasse und Schleifpapier bereitlegen... und schon kann es losgehen 😉

Alexander Grivonev
Ja das war wirklich eine Baustelle das Ding. Aber trotz des Ehrgeizes der Chinesen, dem Modellbauer auch den letzten Nerv zu rauben, sieht mir Amodel so auf den ersten Blick nach mehr Arbeit aus...

Gergő Takács
Wow! Very cool Project! I will take a seat! 🙂

Pierre Pierre
Following

BAT21
Feel welcome mates.

Michael Kohl
Starts to look like a Mil Mi-6? Well, then it's time to charge the teaser to a picture of your model. 😉

Juergen Klinglhuber
Joining in late, but sure worth it. Clean built on this "filling the gaps" giant. 👍

Treehugger
Q: The tiny "brass" colored tubes for the wiring on the main rotor head, are those bits of cut up syringe tips?

BAT21
For these parts I cut 0.5mm brass tubes from Albion Alloys.

Spanjaard
rotor head is truly impressive

Alec K
I agree, pimped to the hilt 👍

Casey Beckett
Recently discovered Albion Alloys here - lovely stuff!

BAT21
Many thanks guys, much appreciated.

CaptGPF
That rotor work is sick!
…but so is the PE cockpit work at this scale! Watching!

Alec K
Excellent progress 👍

Łukasz Gliński
On the pic #35 it looks professional, not provisional 😉

Florian H.
Sehr schönes farbspiel

BAT21
Many thanks 👍

Łukasz Gliński
Yes it is time 👍 Brilliant shading btw

Michael Kohl
Great finish

Erik
"So what do you think? Time to remove the masks from the windows?"
Yes! 👍 😉

BAT21
Thank you mates.
The self-cut masks on the side windows revealed a catastrophic picture after removal: something sticky remained on the windows... the hoped-for cover was also rather poor, the paint got under the masks at the edges. 🤬

Now I'll make a calming coffee and then try to repair it.

Alec K
Damn, that sucks. I had same experience on several builds, nothing some scraping and reapplication of Future can't fix.

Nicolas
Looks good so far.

Oliver
watching! I like this

DerMattes
Following, looks great so far!