Новини
Mina Ro
добави нов фотоалбум.
добави нов фотоалбум.
1 снимки
1/48 Ka-27 helix projectНов: 13 September, 20:45 1:48
Проект: Ukranian KA-27 Helix "Yellow 27"
13 September, 20:45
Mina Ro
Just a note, Vallejo pastel blue is a very good match for the KA-27 interior after researching real pictures and experimenting with many blues and grey blues.
Just a note, Vallejo pastel blue is a very good match for the KA-27 interior after researching real pictures and experimenting with many blues and grey blues.
13 September, 20:47
Ludvík Kružík
добави нов фотоалбум.
добави нов фотоалбум.
12 снимки
Mi-1M, model conversion by Special Hobby - WIP1:48
For the bow I used a modified upper plastic part from the kit and made a new lower part with windows. For the bow I used...
Проект: Mil Mi-1M Czech Air Force
14 15 August, 08:24
Ludvík Kružík
I still miss this small helicopter in my collection of flying machines used in Czechoslovakia. The time has come for me to rectify that. 😉
I still miss this small helicopter in my collection of flying machines used in Czechoslovakia. The time has come for me to rectify that. 😉
15 August, 09:26
Ludvík Kružík
Hello, Greg. I know there's a Mi-1M kit in 1/72nd scale. Unfortunately, only this and a rather old kit from Special Hobby exists in 1/48 scale. In addition, this kit is an older version of the Mi-1A, which is different from the upgraded version of the Mi-1M. It has a different nose shape, different cockpit glazing and other minor changes. And since I decided to build the upgraded version of the Mi-1M, I will not avoid modifications to the kit.
To give you a better idea of the extent of the modifications to the kit, I've included a picture with the differences between the Mi-1A and Mi-1M versions color coded.
Hello, Greg. I know there's a Mi-1M kit in 1/72nd scale. Unfortunately, only this and a rather old kit from Special Hobby exists in 1/48 scale. In addition, this kit is an older version of the Mi-1A, which is different from the upgraded version of the Mi-1M. It has a different nose shape, different cockpit glazing and other minor changes. And since I decided to build the upgraded version of the Mi-1M, I will not avoid modifications to the kit.
To give you a better idea of the extent of the modifications to the kit, I've included a picture with the differences between the Mi-1A and Mi-1M versions color coded.
16 August, 22:23
Greg Baker
Oh, neat! I didn't realize there were so many changes between the versions. This is going to look great!
Oh, neat! I didn't realize there were so many changes between the versions. This is going to look great!
17 August, 15:09
Ludvík Kružík
Greg, thank you for your support.
____________________
I started building the model by making new transparent parts.
Greg, thank you for your support.
____________________
I started building the model by making new transparent parts.
17 August, 22:31
Greg Baker
Yeah. Nice work on the heat-n-smash moulding for the clear parts. That can be tricky to do.
Yeah. Nice work on the heat-n-smash moulding for the clear parts. That can be tricky to do.
18 August, 16:15
Ludvík Kružík
@Alec K
I used to buy ABC magazine regularly as a kid and eagerly awaited each new issue 🙂. I assume your mention of ABC magazine refers to the occasional modeling tutorial section.
@gorby, @Greg Baker
It's not too difficult to make new transparent parts by stretching warmed transparent foil over a pre-made template. Preparing the template is the most work. Stretching the warmed foil onto the template is just a routine that anyone can do after a few attempts.
@Alec K
I used to buy ABC magazine regularly as a kid and eagerly awaited each new issue 🙂. I assume your mention of ABC magazine refers to the occasional modeling tutorial section.
@gorby, @Greg Baker
It's not too difficult to make new transparent parts by stretching warmed transparent foil over a pre-made template. Preparing the template is the most work. Stretching the warmed foil onto the template is just a routine that anyone can do after a few attempts.
18 August, 22:17
Ludvík Kružík
Hello, Robert! Good to see you here. You haven't missed much so far. Up to this point I've been more concerned with preparation than building the model.
Hello, Robert! Good to see you here. You haven't missed much so far. Up to this point I've been more concerned with preparation than building the model.
28 August, 20:59
Ludvík Kružík
I want to try to use the sandwich construction in the production of new glass parts for the coptics. So I made (using the same process as the transparent parts) parts out of white plastic sheeting. These parts will have holes cut out for the windows. The transparent part will then be inserted between these two parts. The white outer and inner parts will form the embossed framing of the transparent part.
I want to try to use the sandwich construction in the production of new glass parts for the coptics. So I made (using the same process as the transparent parts) parts out of white plastic sheeting. These parts will have holes cut out for the windows. The transparent part will then be inserted between these two parts. The white outer and inner parts will form the embossed framing of the transparent part.
28 August, 21:18
Ludvík Kružík
Welcome, Jennifer, we're glad to have you on board and thank you for your goodwill. 🙂
Welcome, Jennifer, we're glad to have you on board and thank you for your goodwill. 🙂
30 August, 09:46
Ludvík Kružík
I came back from vacation and it started to rain. Ideal conditions for modelling. 🙂
So I'm back and continuing to work on the model. I need to glue the finished nose to the glued fuselage so the cockpit overlay fits exactly. That determines the workflow. First I have to finish the nose and the inside of the fuselage and glue all the parts that need to be glued to the fuselage halves from the inside. After gluing the fuselage halves together, I would no longer be able to get to these parts (or only with great difficulty).
Photos of the work progress will be coming soon.
I came back from vacation and it started to rain. Ideal conditions for modelling. 🙂
So I'm back and continuing to work on the model. I need to glue the finished nose to the glued fuselage so the cockpit overlay fits exactly. That determines the workflow. First I have to finish the nose and the inside of the fuselage and glue all the parts that need to be glued to the fuselage halves from the inside. After gluing the fuselage halves together, I would no longer be able to get to these parts (or only with great difficulty).
Photos of the work progress will be coming soon.
13 September, 20:42
J. L.
търси този кит
търси този кит
Avro Lancaster B MkI/ B MkIII/ Dambuster Limited Edition Merit Exclusive (3 in 1)
HK Models 1:32
01E012 2020 Нови части 13 September, 20:41
/bg/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=bg
35
35
/bg/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo