Новини

Ben M
👀

Nathan Dempsey
Welcome Ben!

Work has started. Drilled holes in the lower wing for hardpoints and centerline fuel tank. Cockpit is nearly complete with photos soon since it will be nearly invisible once installed.

Nathan Dempsey
Added a shot of last night's work. The cockpit was installed and I'm ready to join the fuselage halves. The wheel well construction was also completed along with some paint work there.

James C
Off to a great start 👀 👍

Thomas Bischoff
I'm in - have Hobbyboss Bearcat waiting to be built.

Robert Podkoński
Watching with pleasure 🙂

Nathan Dempsey
Thanks James, Thomas & Robert!

Assembly continues with no issues at all.

Villiers de Vos
Coming along nicely.

Nathan Dempsey
Thanks Villiers!
Well I had to go and say "no issues at all" out loud… Funny that the cowling fit perfectly during dry fitting but once glue was applied a bit of sanding was needed to make it fit right. Also I painted the inside of the cowl Yellow Zinc Chromate even though the instructions barely mention anything other than the cowl and prop magically there on the last step.

Guy Rump
Looking good, following. 👍

Nathan Dempsey
Thanks Guy! Welcome aboard 🙂

Major assembly is complete. Time for painting to begin.

Nathan Dempsey
Spent most of the morning sealing up the wheel wells and cockpit with tissue paper in preparation for primer and the initial color: AK Xtreme Aluminum.

Ben M
You could have just started with the Hawk plated kit 😂 I'm thinking of trying chipping fluid on the prop but I will need to prime at least under the yellow tips.

Nathan Dempsey
That certainly would have cut a step out! I'm going to use the old hairspray method since I don't want to wait a week for chipping fluid.

Nathan Dempsey
Aluminum applied today. A little splotchy but luckily it's just an undercoat for chipping.

Nathan Dempsey
Much painting last night and today: I applied the hair-spray then the Dark Sea Blue & now the chipping begins.

Mr D
Very nice 👍 yes they had thin paint and lots of wear n tear during use.
Coming along well.

Villiers de Vos
Very nice chipping effects.

Mark Sherwood
I concur with Villers. Looks well beaten up. 🤘🥸👍

Lex Jassies
Photo 3: that's not cheating....that's making the most of your model 😉. Nice progress by the way 👍

Nathan Dempsey
Thanks mates for your kind comments! All work has halted due to hurricane preparations.

Mr James
Extreme wear indeed. Maybe they didnt use etching primer back in the black and white days 🙂. You've done an excellent job of it. If this effect can be achieved with the old trusted hairspray method, why would one buy the chipping fluid. Maybe there are advantages I'm unaware of.

Mr D
Not a bad little kit, looks quite robust and not to complicated. The cockpit was definitely worth getting, was it easy to find ??
Looking good 👍👍👍

Nathan Dempsey
Mr James: The hairspray has an added bonus in that one can will last for MANY projects.

Mr D: The kit is available under the Academy boxing I believe. As for the cockpit I believe it is still easy enough to find online.

Nathan Dempsey
Today I added the landing gear and the drop tank. The drop tank is not seen much in my photos, but I thought it looked nice. Decals are also done, so now it comes down to more weathering and exhaust stains.

Nathan Dempsey
Added a shot of the continuing weathering. Today I added the radio antenna wire. The last step is painting and weathering the bombs.

Nathan Dempsey
Calling this one complete. Final photos added.

Thomas Bischoff
well worn, well weatherd, well done 👍

John
Love the wear-n-tear, nice job Nathan!

Mr D
Great job,👌
Nice model, and realistically battle worn.
Well done... come out nice 👍👍

Villiers de Vos
Very nicely done.

Robert Podkoński
Fantastic job, Nathan! Looks great!

Dave Flitton
Seems like a good start. How is the build so far?

Villiers de Vos
Very nice work on an interesting subject.

Robert Podkoński
Great job on this kit!

Villiers de Vos
Very nice work on this little gem.

Robert Podkoński
Cool!

Robert Podkoński
Good job!

Spanjaard
looking really interesting 🙂

M4A1
Thanks! Hope the result will meet your expectations. 🙂 Not the first D-Day project, but just my attempt to built a part of the Atlantikwall in Normandy during D-Day.

Rui S
This is going to be huge. I'm the first boat😉

M4A1
Added some pics of the construction of diorama base and the construction of the PAK gun.

M4A1
The roof parts of the bunker are dry fit.

M4A1
Added some pics of a couple of G.I.'s painted in the base color and the PAK gun which is constructed. Currently assembling some ranger figures and steel obstacles for on the beach. Try to minimize the amount of pics because I love to take lots of pics when working on a project. Also included a pic of the nameplate.

M4A1
Obviously the tyres on the PAK are not fitted the way they are supposed to be fitted. This is done for test purposes.

coporado
Great idea and nice Start, following!

Tini Hendriks
Very nice!

M4A1
The beach, dunes, trench and the German bunker are getting more and more to how I want them to be.

Rewop
Looks great.

coporado
Great progress

M4A1
I've painted the PAK in the dark yellow base color with the airbrush. First I painted it with grey primer, than with black paint and then dark yellow. I tried to do some preshading but that didn't really turned out as I hoped it would. Nevertheless I'm happy with how the PAK looks. I've also painted the details and now I'm doing chips. Washes and drybrushes will be done at the last step.

Simon Nagorsnik
a lot of work to do but look impressive 👍

M4A1
The first piece of barbed wire is finished. Hand made. Painted with Tamiya metallic grey. Still my favorite paint for steel, metal or iron.

Bruce Huxtable
The home-made barbed wire is very impressive. How many more metres to do...? It's coming together for sure 👍

Pepe
Muy buena pinta

M4A1
Thanks for the nice comments. I don't know how many metres of barbed wire I have to add, but it's quite alot. 😁

M4A1
And a little update. Worked on creating sand bags, placed the PAK gun in the bunker and closed the roof.
I've put sand and tufts of grass on the roof of the bunker. Also placed the first parts of barbed wire.

Rui S
Nice progress. Keep it coming 👍

M4A1
A few items of this project have been finished. I finished the German mortar crew and placed them in the dunes. I also added more barbed wire. The barbed wire obstacle is getting somewhere. Also finished painting the dead German that will be placed in the door of the bunker.

David Taylor
Just wow.

M4A1
Thanks David! The first American G.I. is finished. I'm quite happy with how he turned out.

Robin (WhiteGlint)
What a huge project. Awesome work so far! 👍
I think your figure painting skills are top notch.

M4A1
Thank you! Another German soldier is finished. This one might not be as good as the previous German and American G.I. but it's good enough for me. The only thing is that the strap on his rifle is a bit width.

Guy Rump
Looking great! 👍

M4A1
Thanks Guy! The 2nd American G.I. of the 29th ID is finished. I'm happy with the result.

M4A1
The 3rd American G.I. is finished. That makes this one the 9th completed figure of this project. As with the other figures I'm also happy with this one. Let's start working on the 10th. 🙂

Rui S
Impressive figure painting 👍

M4A1
Added some sand bags at the back of the pillbox and added the dead German in the door of pillbox. Also used a white drybrush to add depth and to make the damage to the concrete more visible. On the roof of the pillbox I put some camouflage netting.

M4A1
Added more self made camouflage netting on the roof of the pillbox.

Spanjaard
Nice!

coporado
Great progress here!

M4A1
Thanks guys!

M4A1
Thanks Karl! Add pics of another finished German. Will get it's place soon in the trench.

Rui S
Again, impressive figure painting 👍

M4A1
Thanks Rui! Nice to read. 🙂

M4A1
Sure I can share how I made the sandbags. No problem. I got it from a Dutch tutorial. Will translate it and send it to you.

I've placed the commanding German in the trench. Added a pic of that.

Spanjaard
add the link to the tutorial here, aub 😉

David Taylor
Figures look superb.

M4A1
Thanks for all the positive feedback. Started building seven years ago and never thought I would got this far. Many thanks goes out to a building buddy here in the Netherlands who taught me alot about figure painting.

Guy Rump
Your building buddy taught you well, the figures are excellent! 👍

Pietro De Angelis
Wow, amazing project, figures and dio,
can't wait to see it finished!

Mathias Decommere
This is a magnificent diorama! I love already every inch of it!

M4A1
Thank you Mathias and Pietro. Can't wait myself to see this project finished. By that time I've made more than enough barbed wire. 🙂

Munkyslut
What a fantastic dio!!! I'm more & more impressed every time I look👌

Marcin Snakowski
Good job. It looks very promising!
Using an airbrush, I would add some sandy color to the vegetation. It is now too distinct from the soil. In a similar way and with an oil wash, I would slightly differentiate the sand with darker shades here and there.

M4A1
Thanks guys! When I'll resume working on this project I'll take your suggestions in consideration.

M4A1
The first row of barbed wire runs from left to right in front of the bunker. Took alot of time to get there. I'm gonna add 2 more rows of barbed wire left of the bunker and in front of the trench right to the bunker. Also added the German mg gunner. Gonna add a opened ammo box and a belt of ammo running to the mg.

Doubtingmango
Love these huge projects!

M4A1
Huge it is. 🙂 Currently working on one more big project and after that I'm quite sure I'm done with huge projects. 🙂 Because of the amount of work that goes with it I kind of loose my motivation after a while. Fact remains that if a project like this gets completed you really have something.

M4A1
More barbed wire added. We're getting somewhere. 🙂

M4A1
Last figures are done. Finally, after four years. 🙂 Now I have to finish the base. The end of this project is starting to get in sight.

Mathias Decommere
Patience is key

M4A1
Absolutely. Fact is I shouldn't be working on so many projects at the same time. 🙂

Munkyslut
This is just getting better & better everytime you go near it…….. is your name Midas? Seriously impressed every time I check in👌👌

M4A1
Thank you very much for your compliment! Very nice to read. 🙂

M4A1
The barbed wire is still making good progress. Now working on the area in front of the trench.

Mr James
All that beautiful painting and weathering on the PAK and only the barrel to be seen 😉 Your figure painting on the uniforms is splendid. What a project 🙂

Holger Hubbes
Absolutely awesome

M4A1
Thank you guys! Yes James, in a way it's a pity that only the barrel of the PAK is visible, but I knew that when I started this project. I'm glad that producing and adding the barbed wire is reaching it's end. That took me way more time than I imagined.

CaptGPF
I agree with Mr James - your figures are always top notch! Curious to see how this turns out.

M4A1
Thank you!

M4A1
The final details have been done. Added bits of concrete blown off the bunker by shell fire and sand that got blown away by other shell fire. Next set of photos are from the end result. Coming soon.

CaptGPF
Wünderbar!

M4A1
Thank you!

coporado
Outstanding! super excited for the final shots!

M4A1
Thanks! I'm excited too so I hope I can post them very soon and show this project in it's entirety.

M4A1
The final shots are up. I've got more shots so if more shots are wanted just let me know and I'll post more.

coporado
Fantastic finish, congrats! Will you bring it to any upcoming model Show? Would to love to see that live.

M4A1
Thanks for the kind words. 🙂 Unfortunately I won't be attending any model shows.

Mathias Decommere
Fantastic work! Very impressive! 👏🏼👏🏼👏🏼

Robert Podkoński
Fantastic job on this demanding kit. Chapeau bas!

BAT21
Thanks for your nice feedback 👍

Anatolii Smyshliaiev
Excellent work. And mine has been standing unpainted for several years. Only in the Mi-10PP version with a container of electronic interference.

BAT21
Yes, the Mi-10PP is still on my to-do list.

Guy Rump
Great job! 👍

Tibor Szilvai
Excellent! 👍

J35J
Impressive work! Congrats👍🏻

BAT21
Many thanks.

Neuling
Clean and careful work on this interesting helicopter. Very appealing paintwork!

bughunter
The picture 11 is the best of this beast 👍

BAT21
Glad to read such nice words 😄

Dave Flitton
Excellent result on your "Daddy Longlegs"

Michael Schubert
Nicely done, and I live the use of the box art..looks great!