Новини

Roland Sachsenhofer
This project has been waiting long enough, now the time has come! The "shell", seen here, is quickly put together, the glued seams are still wet, so to speak. I plan to show the A90 in a proper dio - gliding just above the water!

Michael Kohl
One one those weird sovjet constructions. Will be fun to follow.

Roland Sachsenhofer
Oh yes, Weird and.... big. That must have been a massive vehicle!

Ben M
watching

Skyhiker
Neat

Roland Sachsenhofer
Feel very welcome! 🙂

Treehugger
I just remembered, I have this kit in my stash.
Are those windows on the side? Like on passenger jets?

Roland Sachsenhofer
If this was some kind of passenger aircraft, I would book a flight for sure. 🙂
I will drill the windows and fill them with Krystal Klear.

Raz1
No windows, apparently.

See en.wikipedia.org/wiki/A-90_Orlyonok

Dave Flitton
Watching!!

Roland Sachsenhofer
Thank you both for interest and comments! Well, I will think over with that windows.... Thank you for the link!

Skyhiker
Looks to me like there are windows in that Wikipedia photo.

Raz1
I stand corrected. I had originally not seen the windows. Thanks, Skyhiker.

Plenty of interior photos here: flickr.com/photos/la..597/with/45021731405

And the last surviving example (per Wikipedia) is here: museum-vmf.ru/

Even though the appropriate page won't load here, a photo displays in the top-of-page banner rotation.

Skyhiker
Wow, those interior shots are incredible.

Roland Sachsenhofer
I agree, what pictures! The question of the windows should now also be answered "from the inside" as well. Thanks for these excellent links, mates!

Roland Sachsenhofer
A few new pictures here too: the finished pre-shading has shown a few touch-up needs, but tomorrow I want to be able to apply the surface colour!

Roland Sachsenhofer
With these pictures I open the book report on Roden's Junkers D.1: I tried to extend the interior with some steel wire, the seat belts are from Eduard. For the detailing I downloaded the very interesting building instructions from Wingnut Wings for the large D.1 in 1:32, which is quite helpful if you want to have a good documentation as a basis for detailing. I'm also going to realise one of the WW variants, which I immediately liked: all in Dural/ NMF with only a minimal set of markings.

gorby
Nice work so far. Looking forward to this. 🙂

Michael Kohl
Auch da bin ich dabei.

Roland Sachsenhofer
I'm very pleased - appreciated!

bughunter
Watching!
I have done the short fuselage already, I hope one day I can do the long one too.

Is the engine painting finished? I can recommend the WNW manual for this, still available on WNW page.

Roland Sachsenhofer
Thanks for the tip - it's definitely a good one! The printed WNW instructions are next to me, so I want to use a little oily black on the top of the engine and add a little "brass"... But not only WNW instructions, also your excellent work is my reference.

Villiers de Vos
Very nice progress.

Roland Sachsenhofer
Thank you for your words, appreciated!

Roland Sachsenhofer
The fuselage of the D.1 is now closed, the only thing to be careful of was not to damage the corrugated sheet metal joints. A related issue arises with the leading edges of the wings: in my opinion, the prototype shows a continuous line around the leading edge.... this will be difficult to depict: I will try to get close to this with careful sanding and the same amount of reworking with a scalpel.

Roland Sachsenhofer
Now it worked with the upload of the pictures!

Christian Lehmann
Progress is slow but continously.

Markus Helmers
Interesting, where do you even find these kits?

Christian Lehmann
There is a distributor for Europe in the UK. Its name is Tirydium Models.

CaptGPF
Watching!

Christian Lehmann
Some new pics uploaded

Torsten
😎 ❤️️

Juergen Klinglhuber
congrats - looking great!

Christian Lehmann
Thanks Torsten and Juergen!

Gareth Lloyd
The panel fading looks amazing, really nice Christian 👍

Markus Helmers
Agreed, the panels look really good. Makes me want to repaint my Venator.

Christian Lehmann
Thanks Garreth and Markus. I only preshaded the most prominent panellines with a medium gray color. For the majority of the panels I used the primer ( mr.Surfacer 1200) as prehading color. Each panel is seperately airbrushed begining at the center of the panels with a very light gray. For the bright panels I added one drop white and masked the panels before airbrushing them. For the colorized panes I added some olive drab or brown into the light grey base color and applied the high dilluted color in different layers with a brush.

Christian Lehmann
Electronic components are installed and hull is closed.

Markus Helmers
So the fibres are just so you can use fewer LEDs? Also are those premade chips for effects or some type of nano arduino? Not that advanced with electronics yet. I cheat where I can so this is very interesting for me to see how it's done. 🙂

CaptGPF
Using fiber optics to cut down on the number of LEDs is brilliant!

Christian Lehmann
@ Markus: Youre right, the fibres limit the number of LED´s and the small fibres enable to create small dots of illumination like at the turbo lasers . The small IC´s are responsible for flickering and the others at the large bord provide constant current of 20 mA like an electronic pre resitor. Iam not sure if they are really needed but after some try and error they helped to avoid damaged LED´s. I tried to keep it simple because I am also not that familiar with electronics. Power source is a battery pack with 3x1,5V=4,5V batteries and everything is connectet parallel so that each part gets the same voltage.

Markus Helmers
the small fibres were obvious to me, just unsure about the big ones, but that's not a bad idea at all. You can trick so much with electronics. I recently got some LED remotes off ebay for like 2€ each and while I wasn't sure they'd work at all, it turns out they're not only capable of dimming the LEDs, but also come with a bunch of premade effects that you can even adjust the speed of. I was very impressed with them.

Christian Lehmann
Finished! Unfortunately it turned out after final assembly that the LED´s of the bridge illumination did not work anymore. I was able to replace only one of them. So the effect is now not as it was originally.

Markus Helmers
Oh I hate it when that happens. Had a Bandai Slave-1 where I tore cables like 5 times. Still haven't fixed it xD Anyways, awesome build, like I said on FB, the lighting effects are something else! Love it!

Vincent
Very impressive build!!!

Christian Lehmann
@ Markus: You can imagine that I was really p.... off and dissapointed because all the invested time and work was for nothing.
.

Christian Lehmann
@Vincent: Many thanks.

CaptGPF
Wow! Totally badass! Love the final result!

Christian Lehmann
Thank you . I am happy that you like it.