Новини
Igor Kondrashenkov
добави нов фотоалбум.
добави нов фотоалбум.
46 6 September 2023, 21:24
Doubtingmango
That engine is stunning! I've had my eye on this kit for a long time. Love to hear your thoughts on it when you're done
That engine is stunning! I've had my eye on this kit for a long time. Love to hear your thoughts on it when you're done
9 July, 22:14
Igor Kondrashenkov
Kit is absolutely fantastic. parts so nicely fits together ... minimum sanding work no issues with clear parts fitting (although clear plastic is a bit soft in my opinion, so requires extra care).. detailing is amazing, (almost 450 parts plus I've used several photoetched sets mostly for interior, which added more realism), very thin and crisp panel lines and rivets - ... model is almost finished, so I can surely recommend it ... several words about the engine - it is very detailed and can be done with a great level of realism., so it could easily be treated as a separate model kit 🙂
Kit is absolutely fantastic. parts so nicely fits together ... minimum sanding work no issues with clear parts fitting (although clear plastic is a bit soft in my opinion, so requires extra care).. detailing is amazing, (almost 450 parts plus I've used several photoetched sets mostly for interior, which added more realism), very thin and crisp panel lines and rivets - ... model is almost finished, so I can surely recommend it ... several words about the engine - it is very detailed and can be done with a great level of realism., so it could easily be treated as a separate model kit 🙂
10 July, 08:13
Vincent
This is already a impressive build. Great work on the interior detail and camo scheme. Looking forward to the end result!!
This is already a impressive build. Great work on the interior detail and camo scheme. Looking forward to the end result!!
10 July, 11:43
Alex
добави нов фотоалбум.
добави нов фотоалбум.
14 27 June, 09:04
Villiers de Vos
Very nice texturing and weld marks on this Soviet beast. The photo etch details is a nice touch.
Very nice texturing and weld marks on this Soviet beast. The photo etch details is a nice touch.
10 July, 02:10
Alex
Thank you, Mate! This photo etch is selfmade from 0.2mm brass plate ))) I need to buy the photo etch bender, to make it better. ))
Thank you, Mate! This photo etch is selfmade from 0.2mm brass plate ))) I need to buy the photo etch bender, to make it better. ))
10 July, 07:14
Skive
търси този кит
търси този кит
Japanese Navy Destroyer Shimakaze - Naval Port Scenery Set
Tamiya 1:700
25417 2018 Комплект модели Multi topic (2)16 July, 19:36
Skive
търси този кит
търси този кит
IJN Destroyer Shimakaze 'Battle of the Philippine Sea'
Hasegawa 1:350
40102 (HAS40102) 2020 Нови части 16 July, 19:36
Kent Karlsen
добави нов фотоалбум.
добави нов фотоалбум.
2 26 March 2016, 16:12
Bernhard Schrock
Kent: it is a great pleasure to see yours skills and attention to detail!
Kent: it is a great pleasure to see yours skills and attention to detail!
26 March 2016, 19:23
Spanjaard
that cockpit is a true work of art.... i would love to see the final model 🙂
that cockpit is a true work of art.... i would love to see the final model 🙂
6 January 2017, 12:58
Mike Thomas
I consider myself lucky to get the headlights on a 1/16 car looking good. This is incredible stuff, Kent.
I consider myself lucky to get the headlights on a 1/16 car looking good. This is incredible stuff, Kent.
6 January 2017, 13:02
Bryn Crandell
WOW! Great detail that provides inspiration for those of us that haven't stepped into the deep end yet. Looking forward to what's next.
WOW! Great detail that provides inspiration for those of us that haven't stepped into the deep end yet. Looking forward to what's next.
6 January 2017, 13:09
Bart Goesaert
I don't know how you do that every time, but it always seems like you are able to shrink the real model... outstanding work so far...
I don't know how you do that every time, but it always seems like you are able to shrink the real model... outstanding work so far...
6 January 2017, 13:19
Holger Kranich
Fantastic Kent, this is really fantastic! Your detailing is jaw dropping!
Fantastic Kent, this is really fantastic! Your detailing is jaw dropping!
6 January 2017, 13:26
Kent Karlsen
Thank you, not much of it will be visible after I've closed it up...
Thank you, not much of it will be visible after I've closed it up...
11 January 2017, 22:14
gorby
Utterly stunning work Kent! I could easily believe that photo 40 is the real beast.
Utterly stunning work Kent! I could easily believe that photo 40 is the real beast.
9 February 2017, 15:27
Gary Brantley
Too right! That photo is tremendously realistic! Well done Kent! 👍
Too right! That photo is tremendously realistic! Well done Kent! 👍
9 February 2017, 15:30
coporado
Wow great dio! A bit of a pitty all those nice crafted details are hidden behind the walls, thanks for sharing that pics!
Wow great dio! A bit of a pitty all those nice crafted details are hidden behind the walls, thanks for sharing that pics!
18 December 2019, 04:55
dawei xu
добави нов фотоалбум.
добави нов фотоалбум.
5 16 July, 09:19
Zbynek Honzik
Very nice result. 👍 Are the engines and flaps & slots from LACI or from scratch?
Very nice result. 👍 Are the engines and flaps & slots from LACI or from scratch?
16 July, 19:28
Stephan Fässler
добави нов фотоалбум.
добави нов фотоалбум.
18 21 June, 18:01
Nicolas
Oh, a kit from my favorite area of interest. I'm in. Great start with the instrument panel.
Oh, a kit from my favorite area of interest. I'm in. Great start with the instrument panel.
10 July, 05:35
Michael Kohl
Like the plane and the livery you are going for.
My two cents on one or two aspects: I found the brass undercarrige and the cockpit section you listed as aftermarket pretty useless. The undercarriage doesn´t solve the problem to ease the alignment of the landing gear and the cockpit section doesn´t provide any better detail than the kit parts. I set both aside and rescribed the soft outlines of the cockpit doors. Pouring transparent resin into the cabin windows gave a nice flush appearance. You may consider that.
Good luck with your build. I will follow with keen interest.
Like the plane and the livery you are going for.
My two cents on one or two aspects: I found the brass undercarrige and the cockpit section you listed as aftermarket pretty useless. The undercarriage doesn´t solve the problem to ease the alignment of the landing gear and the cockpit section doesn´t provide any better detail than the kit parts. I set both aside and rescribed the soft outlines of the cockpit doors. Pouring transparent resin into the cabin windows gave a nice flush appearance. You may consider that.
Good luck with your build. I will follow with keen interest.
10 July, 07:54
Stephan Fässler
Thanks Michael and Nicolas. As my second kit to build, I thought I spice it up a bit with some aftermarket stuff, indeed, the new cabin with the new windows gave me some head scratching as to how install it, then figured it eventually out. My alignment looks a bit messy and I hope u can make it look aligned with putty etc… so far my opinion as an inexperienced builder is that you could safely leave it stock, as is….
I did not come yet to the brass parts and hope it will be better with these parts. Let's see 🙂
Thanks Michael and Nicolas. As my second kit to build, I thought I spice it up a bit with some aftermarket stuff, indeed, the new cabin with the new windows gave me some head scratching as to how install it, then figured it eventually out. My alignment looks a bit messy and I hope u can make it look aligned with putty etc… so far my opinion as an inexperienced builder is that you could safely leave it stock, as is….
I did not come yet to the brass parts and hope it will be better with these parts. Let's see 🙂
10 July, 08:07
Thomas Kolb
I am happy to take a seat! I personally find red liveries extremely difficult to pull off, so I am watching with great interest!
I am happy to take a seat! I personally find red liveries extremely difficult to pull off, so I am watching with great interest!
10 July, 08:54
Łukasz Gliński
Following this challenge.
The Aerocraft cockpit will require a lot of sanding, but the original windshield is definitely too narrow - been there, done that 🙂
Following this challenge.
The Aerocraft cockpit will require a lot of sanding, but the original windshield is definitely too narrow - been there, done that 🙂
10 July, 11:15
Zbynek Honzik
Taking a seat. And fingers crossed that the strength and motivation will last until successful completion!
Taking a seat. And fingers crossed that the strength and motivation will last until successful completion!
16 July, 19:31
John Novak
притежава кита
притежава кита
WWII RN Italian navy heavy cruiser ZARA Trumpeter 05347
Shipyard Works 1:350
S350003 2018 Нова матрица 16 July, 19:29
John Novak
притежава кита
притежава кита
MiG-17A/P/F (Fresco A, B, C) - 37mm and 23mm gun barrels set & Pitot Tubes
Model Master 1:72
AM-72-071 2018 Нова матрица 16 July, 19:27
/bg/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=bg
35
35
/bg/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo