Моделистка база данни | Управител на личния склад
Sybar
Sy Bar (Sybar)
GB

RAF WWII VC Winners - F.O. Donald Garland V.C. and Sgt Thomas Gray V.C.

Коментари

35 19 January, 16:54
Nicolas
Watching
20 January, 09:58
Sy Bar
Found kits bomb-bay doors too curved and thick to use so cut some from plastic card.
29 January, 22:32
Skyhiker
Interesting technique on those figures. Using 3 to for variations of the same color works well.
30 January, 01:02
Sy Bar
Cheers #Skyhiker, as the figures are so small and are in a tiny cockpit with thick canopies they are hard to see so I use old figure painting style with high contrast 😁 glad you found interesting
30 January, 06:10
Sy Bar
I've heard if you want a nice vibrant yellow you should try undercoating in Pink 😵‍💫 well these early WWII high explosive bombs need to be yellow so out with the pink 🤪
30 January, 17:24
Sy Bar
Well they are yellow. I should have left one with grey primer to compare with the pink 🙄. The yellow did seam to cover the pink quickly in just a few light coats so perhaps it works
31 January, 04:55
Skyhiker
A pink undercoat gives a warmer hue to the yellow. For the purest yellow a white undercoat works best. A light grey will dull the yellow slightly.A black undercoat will give you a green hue and take many coats to cover.
31 January, 06:05
Sy Bar
Thanks for info. #Skyhiker
31 January, 09:03
Sy Bar
Trying a different way with using masks for marking. This time trying to paint marking prior to the camouflage colours. Hope I don't leave white rings 🤞
5 February, 20:45
Skyhiker
Wow that looks super. Good luck.
5 February, 22:38
Cuajete
Very nice job so far.
6 February, 20:50
Sy Bar
Cheers #Cuajete
Now the brown is on, hopefully in the right places I'll attempt to make my own masks for the green
7 February, 21:03
Sy Bar
One thing I've just learnt in try to make own masks, is to number the elements as you do them on both the plan and in your cutting software. That way when you move them all about to fit in smaller more efficient space so you know which mask is which especially when you have rotated some, this was learnt the hard way 🤣
Just hope they work now
8 February, 07:02
Cuajete
Good advice 👍
8 February, 20:19
Michael Schubert
@Sy very interested in what you used to create the masks, what is like a cricut machine or similar? And how did you manage to measure out the scale? I have access to a family members cricut and have thought about attempting it for masking, but still nervous.
10 February, 00:28
Jennifer Franklin
Looking really good.
10 February, 02:23
Guy Rump
Looks great! 👍
10 February, 08:54
Sy Bar
Thanks all
#Michael Schubert
I make use of a printer/copier to roughly scale up the decal plans in the kit instructions. I take several measurements off the model, wing length/width etc, then compare them to the plan measurements to get a scale (divide one by the other) I then enlarge to plan by this scale via a copier and it's enlarge option.
Once I have plans to same scale of the model I use my Brother "Scan-n-cut" machine to scan them into its software "Canvas". I trace the patterns in the software and finally cut them out on the cutter using Ormask 810 stencil film.

Wow that sound more complex than it is and in writing this I just realised I could do it all via the Scan-N-Cut machine and it's software, by using the machine to scan the plan make the mask patterns then scaling them all in the software Canvas.
I like the Scan-N-Cut as you can set a half cut so it doesn't cut straight through but only the film. I don't know the exact workings of the Cricut but I'd imagine they work similar as they seam popular in SCM.
As usual there are good YouTube vids on doing this search creating masks for model kits, or some such thing. Good luck learning new techniques.

P.S. a new technique I tried this time was after I applied the mask I sprayed a thin layer of mat varnish to seal the mask and create sharp edges by prevent the next colour bleeding under the mask. It seamed to work but must be thin coats as you could build up ridge along colour boundaries if not careful but these can be knock back with careful sanding which can be easier than fixing bleed through.

Hope all this doesn't put you off giving it a go, as it's good fun and leads to all sorts of possible personal masking options
10 February, 09:49
Michael Schubert
Sounds like a good challenge! Thanks for taking the time to explain it mate 👍
10 February, 10:44
Cuajete
Very nice job and thanks for the explanations.
Congrats!
10 February, 19:58
Sy Bar
Thanks to all for kind words I'll call this small tribute finished.

I'd like to add one last remembrance to this item, while two crew were awarded the VC as they were "decision makers" we should all remember the rear gunner ('along for the ride') who also paid the ultimate price of doing his duty -
Leading Aircraftman Lawrence Royston Reynolds

We will remember them
11 February, 07:05
Nicolas
Very nice result.
11 February, 11:00
Jennifer Franklin
Very nice work and a lovely tribute.
11 February, 11:27

Project info

48 снимки
1:72
В ход
1:72 Victoria Cross Icons (Airfix A50129)
Handley Page HP.52 Hampden
GB Royal Air Force (1918-now)
83 Squadron P1355, OL-W (Wireless Operator/Air Gunner Sgt. John Hannah V.C.)
Септември 1940 Victoria Cross - R.A.F. Scampton, Lincolnshire, England
BS381C:241 BS381C:350 BS381C:642
 

Всички албуми

Преглед на всички албуми »