The Star Of Afrika
Gunsight glasses didn’t last long - went “ping” and never to be seen again …
Yep - those are not panel lines … they are horrible seams that are not supposed to be there
Same on this side … there were more on the rear lower fuselage-but I noticed them before painting
Scrape scrape scrape …
More scrape scrape scrape …
Spinner is awful so tried to reprofile it … it’s better but not great
The reason the spinner needs fixing … too blunt and bulbous
Not perfect but seams gone …
Masking is fun they said …
Bit crooked on the balkenkrauz …
Stencils are HGW wet transfers … lovely stuff
Hinge added to the oil cooler cowling same as top cowlings
Spinner is better than it was …
There’s no cowl hinge on the kit parts - added with a .020 styrene rod and some sharp blade cuts to look like a hinge
Коментари
40 21 March, 08:53
Paul Moore
Stunning build! I really liked your shading along panel lines. Just right amount without looking like a grid. How did you shade those panel lines?
Also, any issues with this kit? Would you do anything different?
Thanks, Paul
Stunning build! I really liked your shading along panel lines. Just right amount without looking like a grid. How did you shade those panel lines?
Also, any issues with this kit? Would you do anything different?
Thanks, Paul
9 May, 04:10
Bill Mathews
paul - I used a very thin mix (90% levelling thinners) of tamiya smoke applied in very thin lines at about 8-10 psi ... as for the kit - construction is pretty good - it's the accuracy issues that are the main problem . the large scale planes forum has a great section on "fixing" the major issues with many big kits - i did a couple of those fixes - the rudder is way too short horizontally - used a resin one for the hasegawa kit , but i think the worst is the spinner - too bulbous - once you see the profile of a hasegawa resin fix you can't unsee it - unfortunately a resin replacement for the trumpy kit is hard to get so I just machined the original down to improve the profile ... it's better but not perfect . for the next trumpy one ( doing a G-6 that is currently in the australian war museum ) i'm using the model monkey 3d printed prop hub and spinner to save the machine work ...
paul - I used a very thin mix (90% levelling thinners) of tamiya smoke applied in very thin lines at about 8-10 psi ... as for the kit - construction is pretty good - it's the accuracy issues that are the main problem . the large scale planes forum has a great section on "fixing" the major issues with many big kits - i did a couple of those fixes - the rudder is way too short horizontally - used a resin one for the hasegawa kit , but i think the worst is the spinner - too bulbous - once you see the profile of a hasegawa resin fix you can't unsee it - unfortunately a resin replacement for the trumpy kit is hard to get so I just machined the original down to improve the profile ... it's better but not perfect . for the next trumpy one ( doing a G-6 that is currently in the australian war museum ) i'm using the model monkey 3d printed prop hub and spinner to save the machine work ...
9 May, 22:43
Paul Moore
Looking at your photo of the right side of the forward fuselage that labeled, "scrape, scrape, scrape" ….i wonder if there's an interesting weathering technique there? The scraping (except down to plastic) looks pretty legit. 🤔
Looking at your photo of the right side of the forward fuselage that labeled, "scrape, scrape, scrape" ….i wonder if there's an interesting weathering technique there? The scraping (except down to plastic) looks pretty legit. 🤔
10 May, 12:02
Paul Moore
And I like your display cabinet. Could I see some more photos of that and any data you could provide: maker, size, lighting, etc.
And I like your display cabinet. Could I see some more photos of that and any data you could provide: maker, size, lighting, etc.
10 May, 12:39
Bill Mathews
Paul - the scraping was something I forgot about the kit . There are mould seams on the upper cowls (that are in the perfect spot for panel lines) and on the lower sides of the fuselage that both need to be removed… I noticed the fuselage ones in assembly but thought the cowl ones were supposed to be there … hence the scraping to remove them (definitely easiest way) cabinets are from ikea - have extra shelves made from perspex but no lighting . Will add some photos
Paul - the scraping was something I forgot about the kit . There are mould seams on the upper cowls (that are in the perfect spot for panel lines) and on the lower sides of the fuselage that both need to be removed… I noticed the fuselage ones in assembly but thought the cowl ones were supposed to be there … hence the scraping to remove them (definitely easiest way) cabinets are from ikea - have extra shelves made from perspex but no lighting . Will add some photos
11 May, 00:46
CaptGPF
This is a rare build where the weathering is done just right IMHO - pronounced enough but not too much where it buries the details, but rather accentuates them. VERY WELL DONE!
This is a rare build where the weathering is done just right IMHO - pronounced enough but not too much where it buries the details, but rather accentuates them. VERY WELL DONE!
11 May, 06:40