Hughes 500C - VOTEC Circa 70's

1
August 5, 2024
This is the real VOTEC aircraft, circa 70's, doing external load operation in Brazil
2
August 5, 2024
After years of interrupting the build, I decided to recover this kit I have satrted. Well the masking tape reuined the transparencies and I will have to solve this problem.
3
August 5, 2024
This is the condition of the kit I have found.
4
August 5, 2024
5
August 5, 2024
This is the most problematic. I will try to do my best to recover it, but I know it won't be like new...
6
August 5, 2024
Trying to clean the transparencies, but I think they will have to be scrapped.
7
August 5, 2024
Tough situation...
8
August 5, 2024
I cleaned the best I could to clean the transparency, with polishing compound and stuff, and masked it again.
9
August 5, 2024
I have to make a modification, transforming a "T" tail from the H500D in a "V" tail from the H500C. I used styrene sheet and brass tube for that.
10
August 5, 2024
After primed and painted white base color, It's time to mask it for the red paint.
11
August 5, 2024
Red paint applied and masks removed.
12
September 15, 2024
I made all decals, and they are applied to copy the H500 in the first photo of the album.
13
September 15, 2024
Right side of the helicopter. Just remembered it was a recovery for an abandoned kit. I try my best to get the windshield clean,
14
September 15, 2024
The belly of VOTEC H500, registration PT-HF
15
September 15, 2024
As I am going to make a diorama of it carrying an external load, I cut disks from acetate and airbrushed the four blurred blades (original kit was a H500D model with five blades), The technique is to simulate blades rotation
16
September 15, 2024
Here is another view of the acetate disk
17
September 15, 2024
Started to scratch build the external load, with popsicle sticks.
18
September 15, 2024
Another view of the blurred blades. Now with tail rotor installed.
19
September 15, 2024
One more view of the blurred blaades
20
October 8, 2024
I have cut an EVA base and scratch build a concrete slab, for external load, with popsicle sticks and Depron, covered with AK surface compound.
21
October 8, 2024
I have cut a transparent sprue to serve as a support for the helicopter. I painted the concrete slab grey, and the base in brownish tones.
22
October 8, 2024
Next step is to scratchbuild the cables, and attach them to the concrete slab and the scratch built cargo hook.
23
October 14, 2024
Finished Model and sling load diorama, similar to the old picture.
24
October 14, 2024
Finished Model and sling load diorama, similar to the old picture.
25
October 14, 2024
Finished Model and sling load diorama, similar to the old picture.
26
October 14, 2024
Finished Model and sling load diorama, similar to the old picture.

Коментари

11 5 August, 15:41

Alex K
In! I appreciate and watch with interest your projects with a special, personal connection - good luck! 👍

5 August, 16:43

gorby
Nice work.

14 October, 13:51

Gustavo Monasterio
Thanks Gorby.. Not perfect, as it was a recovery from an old kit, but that was the best I could do!

14 October, 13:53

Album info

This was a recovery from a started kit I abandoned years ago. I modified a Hughes 500D to a Hughes 500C model. Main differences are the "V" tail instead of "T" tail, and the four blades, instead of 5 blades main rotor.

Hughes 500C - VOTEC Circa 70's

26 снимки

1:48

Завършен

1:48 Hughes 500D Police Helicopter (Academy 12249)

Всички албуми

Преглед на всички албуми »