Revell Spitfire Mk.22/24
![Album image #1 Album image #1](/albums/img/6/0/7/315607-26748-44-720.jpg)
the boxart,,,cool but the box sucks. This is of course RoG, Revell of Germany
![Album image #2 Album image #2](/albums/img/6/0/8/315608-26748-64-720.jpg)
This is how the decals come. the sheet is huge, near 14x8 in. not the usualheavy smooth on one side protector sheet, just plain thin tracing paper and no sleve or bag.
![Album image #3 Album image #3](/albums/img/6/0/6/315606-26748-88-720.jpg)
this is the result !!,,,
![Album image #4 Album image #4](/albums/img/6/0/9/315609-26748-14-720.jpg)
,,,,i had to cut it to protect it from further damage
![Album image #5 Album image #5](/albums/img/6/1/0/315610-26748-79-720.jpg)
,,,,as it's so big it wont fit in a Priority envelope!
![Album image #6 Album image #6](/albums/img/6/1/2/315612-26748-34-720.jpg)
,,,,and some in the middle are messed up but hard to show w/my camera
![Album image #7 Album image #7](/albums/img/6/1/1/315611-26748-65-720.jpg)
here we go again,,,,box is way too big,,,
![Album image #8 Album image #8](/albums/img/6/1/3/315613-26748-10-720.jpg)
everything stupped into one single taped shut bag.
![Album image #9 Album image #9](/albums/img/6/1/4/315614-26748-28-720.jpg)
I read all the reviews on this kit,,,,,
![Album image #10 Album image #10](/albums/img/6/1/5/315615-26748-19-720.jpg)
,,,so i knew what to expect as far as the molds go
![Album image #11 Album image #11](/albums/img/6/1/6/315616-26748-80-720.jpg)
I've built worse,,,,
![Album image #12 Album image #12](/albums/img/6/1/7/315617-26748-13-720.jpg)
it's really not a BAD kit
![Album image #13 Album image #13](/albums/img/6/1/8/315618-26748-92-720.jpg)
it's a good kit for an old reissue
![Album image #14 Album image #14](/albums/img/6/1/9/315619-26748-63-720.jpg)
the glass,,, no surprise,,,actually better than i expected
![Album image #15 Album image #15](/albums/img/6/2/0/315620-26748-18-720.jpg)
but here's where the damage comes, this wing has some pretty nasty gouges from being stuffed in that one bag
![Album image #16 Album image #16](/albums/img/6/2/1/315621-26748-45-720.jpg)
the 2 broken bits I fould
![Album image #17 Album image #17](/albums/img/6/2/2/315622-26748-80-720.jpg)
the large one is obviously the landing gear leg wheel axle pin
![Album image #18 Album image #18](/albums/img/6/2/3/315623-26748-61-720.jpg)
part #35 is obviously broken off,,,
![Album image #19 Album image #19](/albums/img/6/2/4/315624-26748-71-720.jpg)
there should be a pin for the tail wheel here, but that small piece is too small for that
![Album image #20 Album image #20](/albums/img/6/2/5/315625-26748-12-720.jpg)
it actually doesn't look broken off, awful clean break & where's the piece?
![Album image #21 Album image #21](/albums/img/6/2/6/315626-26748-96-720.jpg)
pilot guy looks pretty good. Nice mustache!
![Album image #22 Album image #22](/albums/img/6/2/7/315627-26748-20-720.jpg)
top of the engine
![Album image #23 Album image #23](/albums/img/6/2/8/315628-26748-32-720.jpg)
engine mounts
![Album image #24 Album image #24](/albums/img/6/2/9/315629-26748-25-720.jpg)
poor wheel & tread detail
![Album image #25 Album image #25](/albums/img/6/3/0/315630-26748-39-720.jpg)
ammo belts
![Album image #26 Album image #26](/albums/img/6/3/2/315632-26748-76-720.jpg)
the fuselage
![Album image #27 Album image #27](/albums/img/6/3/1/315631-26748-95-720.jpg)
the sink mark,,,i knew that would be there
![Album image #28 Album image #28](/albums/img/6/3/3/315633-26748-94-720.jpg)
pretty weak gun detail
![Album image #29 Album image #29](/albums/img/6/3/4/315634-26748-47-720.jpg)
the instrument panel,,,,seen worse
![Album image #30 Album image #30](/albums/img/6/3/5/315635-26748-81-720.jpg)
here's the rub. all those trees packed in that bag, sliding around in that oversized box,,,actually wore several holes in the bag. I can see how a small piece could get out and totally disappear
Коментари
9 February 2017, 03:12
![](/profiles/img/26748-490-s.jpg)
Well, I knew what I was in for before I bought this kit. It's a Matchbox re-issue, I read all the reviews, sink marks, bad this & that. I knew what to expect.
I's not that it's a bad kit, it's actually pretty good for an old re-issue, I like it.
It's just another case of bad packaging. One size does not fit all!!
I must say I've never liked the Revell open end carton boxes, they suck. Totally weak, unstackable & unuseable, period, they're junk !!
Airfix's box suffers from the same one size fits all mentality, but at least they supply a good, sturdy, stackable, useable box.
And again all of the trees are "stuffed" into one bag. And not even a sealed bag, but just taped shut, and no shrink wrap either.
At first all looked good until I opened the bag and a couple (2) tiny pieces fell out. The top of one of the wings is pretty scratched up. there's another broken part, but I'm not finding the piece of it.
And the decal sheet is near destroyed !!
On with the pix.
9 February 2017, 04:09
![](/profiles/img/26748-490-s.jpg)
OH ! this being a 2007 release I sure hope Revell is still sending replacements for it. I'll send in a request tonite.
9 February 2017, 04:12
![](/profiles/img/26748-490-s.jpg)
Ok so I put a parts request to Revell, but seeing this kit is 10 yrs old AND a RoG kit, I don't have much hope. I'll make it work either way, but new parts & decals would be nice.
9 February 2017, 05:37
![](/profiles/img/21062-463-s.jpg)
Yeah, that sucks. Maybe you would have been better off getting an old Matchbox kit
9 February 2017, 06:37
![](/profiles/img/26748-490-s.jpg)
Yea it kinda sucks guys, it's frustrating. That's the second "NEW" kit in a row!
I'm beginning to wonder Wilky. Their website says 8 weeks for ROG parts, if they're even available. that's a lot of suspense. Revell has always been tops about replacing broken or missing parts I've had with a few car kits, but those were relatively recent releases.
When it comes down to it I can still build it. The broken pieces are both axle pins and can be fixed. The decals aren't destroyed, just some wrinkles and one scratched, mostly useable.
It's just the point of the whole thing. I bought the kit from Hobbylinc, a reputable seller, it was brand new. It's the packaging! Too much empty space for the parts to float around in, and everything stuffed into one bag, in a POS box!. A couple of 2c airbags would solve the problem. I cant be the only person having this problem!
9 February 2017, 07:54
![](/profiles/img/21062-463-s.jpg)
I'm often left wondering why some kit boxes are so big. Maybe it's a marketing thing but surely the bigger the box the more it costs. I also hate those flimsy boxes surely protection of the contents should override the penny pinching desire of the kit manufacturers. It's not like they aren't already charging us a fortune for a kit nowadays
9 February 2017, 09:03
![](/profiles/img/27409-327-s.jpg)
Robert, don't worry about broken, scratched or missing parts in this box, anything you scratch-built here will be better than OOB part. Know something about it, as I'm currently building this kit and it is ... well, let's say: fun. As for the decals, in this scale masks work much better. Will be watching, good luck and best regards - Hubert
9 February 2017, 11:21
![](/profiles/img/26748-490-s.jpg)
Wilky, I agree totally. Seems like a no brainer to me, and we are talking PENNYS!
DUH. Can you say that?
Hubert, I'll have to take a look at yours. I do rather like painting on the roundels & such better yes. I like the Montex maxi mask sets for that, but have only done a couple. they do look more realistic & don't have to worry if they're going to stick!
9 February 2017, 18:36