Стена
Wall
September 7, 2024
Rod -
добави нов фотоалбум.
добави нов фотоалбум.
7 снимки
Otaki trans am1:12
Centres painted and glued in. I need to find some decals for the sidewalls
Проект: Otaki 1/12 Pontiac Firebird
6 28 August, 15:05
Rod -
This kit is more than 50 years old and amazingly good. The original tires in my kit had decomposed to mush so I got some Tamiya RC tires, machined some rims and 3d printed some centres.
The kit comes with a motor, lights and wiring. Motor hidden in engine block, 4x AA in the fuel tank. It even has little uni joints on the tail shaft.
This kit is more than 50 years old and amazingly good. The original tires in my kit had decomposed to mush so I got some Tamiya RC tires, machined some rims and 3d printed some centres.
The kit comes with a motor, lights and wiring. Motor hidden in engine block, 4x AA in the fuel tank. It even has little uni joints on the tail shaft.
28 August, 15:12
Rod -
I've spent a bit of time trying to get the stance right. Out of box it sits quite high.
I've spent a bit of time trying to get the stance right. Out of box it sits quite high.
28 August, 15:13
Rod -
I have a cnc lathe at home. It has a 75mm spindle bore, a bit bigger than a hobby lathe 🙂
I have a cnc lathe at home. It has a 75mm spindle bore, a bit bigger than a hobby lathe 🙂
28 August, 23:01
August 31, 2024
August 26, 2024
August 25, 2024
Rod -
добави нов проект.
добави нов проект.
25 August, 15:40
Rod -
Anyone know if it is possible to get custom made metal foil transfers? The decal sheet doesn't have the trans am or pontiac badges, they are molded in the body. It will be really tricky to paint and polish the body without ruining them. Easier to remove and replace if possible.
Anyone know if it is possible to get custom made metal foil transfers? The decal sheet doesn't have the trans am or pontiac badges, they are molded in the body. It will be really tricky to paint and polish the body without ruining them. Easier to remove and replace if possible.
25 August, 15:43
July 28, 2024
July 25, 2024
July 24, 2024
June 20, 2024
June 2, 2024
June 1, 2024
May 31, 2024
May 3, 2024
May 1, 2024
April 23, 2024
April 18, 2024
March 20, 2024
February 29, 2024
Rod -
добави нов фотоалбум.
добави нов фотоалбум.
4 28 February, 01:20
Rod -
I started this as a test mule for candy paint. It's coming along better than expected 🙂 The kit wheels and tires are junk (why can't revell get wheels right?) but the rest of the kit is nice. I cut off the kit stub axles and drilled the chassis for 2mm axles and aoshima wheels. Brakes are hobby design/crazy modeller parts.
I started this as a test mule for candy paint. It's coming along better than expected 🙂 The kit wheels and tires are junk (why can't revell get wheels right?) but the rest of the kit is nice. I cut off the kit stub axles and drilled the chassis for 2mm axles and aoshima wheels. Brakes are hobby design/crazy modeller parts.
28 February, 01:30
February 28, 2024
February 27, 2024
February 26, 2024
February 12, 2024
February 11, 2024
February 10, 2024
February 8, 2024
January 27, 2024
January 25, 2024
January 21, 2024
Rod -
добави нов проект.
добави нов проект.
3 21 January, 04:07
Rod -
The USCP 3D printed wheels are breathtakingly good. I would not have believed it was possible to print something so fine and detailed if I hadn't had them in my hand. Spokes are better than photo etch type wheels as they are round, not square!
The USCP 3D printed wheels are breathtakingly good. I would not have believed it was possible to print something so fine and detailed if I hadn't had them in my hand. Spokes are better than photo etch type wheels as they are round, not square!
21 January, 04:14
George Williams
Looks fabulous, hope you can get the tyres on the wheels without damaging them.
Looks fabulous, hope you can get the tyres on the wheels without damaging them.
21 January, 12:02
Rod -
притежава кита
притежава кита
16 inch Italian Wire wheels for 250 Testa Rossa Without Tires
USCP (Ukrainian Scale Car Production) 1:24
24p174 2023 Нова матрица 21 January, 04:06
January 20, 2024
January 19, 2024
December 26, 2023
November 10, 2023
November 9, 2023
November 4, 2023
October 14, 2023
October 11, 2023
September 20, 2023
Rod -
добави нов проект.
добави нов проект.
All comments (5) » 2 28 August 2023, 14:37
Rod -
Oh, man I have no idea! I have the HQ sedan kit on the bench atm, trying to get the choice of wheels and ride height right. Ive been doing very little building lately.
Oh, man I have no idea! I have the HQ sedan kit on the bench atm, trying to get the choice of wheels and ride height right. Ive been doing very little building lately.
20 September 2023, 07:26
Roger Trewenack (Scales-Sales)
Hard to get time & motivation working together sometimes.
Recently I've re-awakened a model I started 20 years ago - Mini Cooper - had a good friend help me with spray painting.
Have you seen some of the aftermarket 3D stuff from Qld for these DDA kits - checkout Micro Resign Designs: SCM Search: micro resin designs
Hard to get time & motivation working together sometimes.
Recently I've re-awakened a model I started 20 years ago - Mini Cooper - had a good friend help me with spray painting.
Have you seen some of the aftermarket 3D stuff from Qld for these DDA kits - checkout Micro Resign Designs: SCM Search: micro resin designs
20 September 2023, 23:07
wnolder.php?lang=bg
2023-09-20 13:23:29
2019-01-26 05:11:01
47602
/ajax/wnolder.php?lang=bg&sd=2023-09-20 13:23:29&md=2019-01-26 05:11:01&filter=&w=47602
todo