Стена
Wall
Bernhard Schrockдобави нов фотоалбум.
185 снимки
Supermarine "Super-Stranraer", Queen Charlotte Airlines, CF-BYM (completed: picture 158)
1:72
All comments (234) » 35 8 March 2015, 19:18
November 14, 2024
AMP 1:48November 3, 2024
Bernhard Schrockдобави нов фотоалбум.
All comments (143) » 37 18 July 2016, 17:05
Kurt FankhauserI am currently working on this model and was looking for someone who had built it before to see how to do the bombardier's seat and kneeling pad. Wow! This is amazing! Thanks for the detailed photos. But now I feel like boxing mine back up and picking a different hobby. 😉
3 November, 04:31
Bernhard SchrockI'm veeeery glad to see this model in the „charts" again! I'm very honored by you comments. Kurt: do you have started the WIP thread yet? This aircraft is one of those that interests me very much, especially since there are hardly any finished models. No wonder the kit is a tough chunk! Please note that I have changed by mistake the seat cushion and backrest on the front seat. When I realized it, it was already too late to correct it.
3 November, 19:40
November 1, 2024
Bernhard Schrockдобави нов фотоалбум.
All comments (15) » 33 2 September, 18:55
Tom SpiegelbergDa häng ich mich gern auch mal mit dran 🙂
Schaut wieder gut aus! Wenn man das so sieht, was Du da wieder aus dem Bausatz holst, bekommt man echt Lust den Bausatz anzufangen.
Die Lackierung ist schon einmal sehr attraktiv!
14 October, 17:23
October 31, 2024
October 30, 2024
Bernhard Schrockдобави нов фотоалбум.
299 снимки
Westland Seaking Mk41 German Navy 89+63 (50 Jahre)
1:48
In the last week I actually managed to instal all the parts without mess, breakdowns and disasters on the fuselage.
Alth...
5+All comments (186) » 165 30 March, 15:44
Mr DYour very good at making the little scratch build parts... Not to be performed over long pile carpets 🫣🤣.
Good interesting work happening.... You may need to register with the FAA at this rate 😉😁
👍
30 October, 21:46
September 27, 2024
September 2, 2024
July 4, 2024
Bernhard Schrockдобави нов фотоалбум.
All comments (11) » 21 9 March 2023, 19:09
gorbyMissed this the first time around. Thanks for the photos Bernhard, some outstanding models on display.
4 July, 10:15
Vintagemodelerthese is incredible outstanding!! just cant believe it it has every rivet
4 July, 10:21
June 4, 2024
Bernhard Schrockпритежава кита
3D Decal Helicopter Seatbelts for UH-1D, Bo-105, Alouette etc.
DF HeloStuff 1:48
DF82948 2021 Нова матрица Multi topic (6)4 June, 09:46
Bernhard Schrockпритежава кита
Sea King Tail Rotor uplift kit - makes both 5 or 6 blade variant.
JAM-SCREW 1:48
48-114 2024 Нова матрица 4 June, 09:43
Bernhard Schrockпритежава кита
Sea King Mk3
Sea King EAPS filter. For Airfix kit. Sea King Mk 50, 41, HU5, HC4 JAM-SCREW 1:48
48-102 2024 Нова матрица 4 June, 09:42
Bernhard Schrockпритежава кита
Sea King Landing Gear - Front & Rear Struts, Weighted wheels inc.
JAM-SCREW 1:48
48-111 2024 Нова матрица 4 June, 09:42
May 29, 2024
Bernhard SchrockI looked at the contents of the box for several minutes to understand why there are so many parts.
First, the box contains parts for one tailrotor with 5 and AND one tailrotor with 6 blades. This covers all variants. 🙂
In addition, Jam-Screw offers the model builder the choice between a „fast“ path and a universal path to build his tailrotor.
The quick way means that the entire rotor is assembled from 6 or 7 parts: the complete rotorhead (including the pitchlinks!!!!) and 5 or 6 blades.
The universal way looks like each blade can be mounted in any position. This means that the blades can have a negative or a positive pitch
All blades can also be swivelled in the parking position. In the second case, there are 22 or 26 parts that a rotor consists of. The „rasterization“ is hardly visible to the naked eye and I suspect that after painting it is not perceptible. Great great great!
Sea King Tail Rotor uplift kit - makes both 5 or 6 blade variant.
JAM-SCREW 1:48
48-114 2024 Нова матрица 29 May, 08:33
Bernhard SchrockI hold the part in my hand and almost don't want to believe what I see there. A masterpiece of 3D design and shape design. Constructing and printing is one thing, but designing the part in such a way that you can get it free without damage is an art! This feat is very successful in Jam-Screw. After a few minutes, the part got free without damage.
Sea King Landing Gear - Front & Rear Struts, Weighted wheels inc.
JAM-SCREW 1:48
48-111 2024 Нова матрица 27 May, 16:38
Bernhard SchrockToday I took a second look at the parts and am even more enthusiastic. On the rear wheel suspension leg, even the eyelet for lashing is shown at the back. At most 0.2 mm thick... The wheels are bulging not only flat at the bottom. Big difference to the „only flattened".
29 May, 08:10
May 28, 2024
Bernhard SchrockThe winch were also included in the package yesterday. Anyone who wants to build a german MK 41 can’t avoid this part. Here, too, the quality is excellent: even the cylindrical part on the housing is precisely reproduced (probably a kind of electrically hydraulic component). Actually, it’s „too bad“ to install the part: then you can no longer see that even the drum with the wire/rope is shown on the inside. Highly recommended.
28 May, 06:37
May 27, 2024
Bernhard SchrockToday the package arrive and I just unpacked the part... I'm thrilled! The depth of detailing is fantastic. Each screw is on right place even the 4 wing nuts on the maintenance panel at the top! Microscopically small and a challenge not to break them off during assembly and painting. Highly recommend! 🙂🙂🙂 thx Jam-Screw for this magnificent part.
Sea King Mk3
Sea King EAPS filter. For Airfix kit. Sea King Mk 50, 41, HU5, HC4 JAM-SCREW 1:48
48-102 2024 Нова матрица 27 May, 16:08
April 30, 2024
Bernhard Schrockдобави нов фотоалбум.
All comments (111) » 113 30 January 2017, 20:12
Bernhard SchrockI am honored by your comments. Thank you.🙂
Spanjaard: 2024 I will visit the EME silver edition and the Avenger will be on board. 🙂
3 August 2023, 14:53
April 26, 2024
Bernhard SchrockJust finished the detailing of the KIT part and I can notice that Jam-Screw done excellent research. The 3D printed radome is exactly matching the original. Even the different type of fasteners/closures is represented correctly. Highly recommend. 🙂🙂
26 April, 16:46
April 15, 2024
Bernhard SchrockFirst look: excellent quality. Second look: excellent quality and excellent research and accuracy!! Very highly recommended!🙂
1 15 April, 05:30
April 4, 2024
April 2, 2024
Bernhard Schrockдобави нов фотоалбум.
All comments (62) » 99 27 February 2023, 16:50
Bernhard SchrockThank you for you comments and praise. I'm glad that you like my last helicopter. 🙂 I will will show the Mmdel on EME 2025 in Lingen.
1 April, 11:36
bughunterI hope this will not be your last helicopter, because these are always masterpieces 👍 It was a pleasure to see your models and meet the builder at the EME. See you next year!
2 April, 21:36
March 31, 2024
Bernhard Schrockдобави нов фотоалбум.
32 снимки
Z-37 Čmelák
1:48
Anti skid surface created as usual of airbrushed decalfilm (unthinned dark grey paint and low pressure)
Проект: Z-37 Čmelák OK-WJT
All comments (43) » 41 27 September 2021, 13:25
Lochsa RiverIt must be you, Bernhard...there was no photoetch to be seen....excellent and as always a joy to look at your work, sir.
13 November 2021, 10:57
DuperScaleI just managed to get my hands on this Kit. Awesome result you have there. Really nice
31 March, 13:49
March 25, 2024
Bernhard Schrockдобави нов фотоалбум.
17 снимки
EME 2024
No
It was a big pleasure to meet Mr. bughunter and see his great biplanes live :):)
Проект: EME 2024
Scratchbuilt
All comments (6) » 18 16 March, 15:16
February 4, 2024
Bernhard SchrockJust yesterday I got a box with the parts as samples via FT (thanks Andy & Félix🙂!). Everything looks very promising: the wheels are realistically bulged and the rear rotor (with 5 or 6 blades, optional) looks fantastic, especially the pitchlinks / articulation. Detailed description follows in my WIP album. Westland (Sikorsky) Seaking Mk41, 89+63 "50 Jahre" | Project by Yellowwing (1:48)
Sea King Uplift Kit - Tail Rotor (5&6 blade) & Weighted Wheel Kit
JAM-SCREW 1:48
48-101 2024 Отменен | Never released 2 4 February, 07:08
Bernhard Schrockпритежава кита
Sea King Uplift Kit - Tail Rotor (5&6 blade) & Weighted Wheel Kit
JAM-SCREW 1:48
48-101 2024 Отменен | Never released 4 February, 06:58
January 16, 2024
January 15, 2024
January 12, 2024
December 23, 2023
December 20, 2023
Bernhard Schrockдобави нов фотоалбум.
All comments (28) » 43 25 September 2023, 14:14
Bernhard SchrockBoris, thanks for you comment 🙂
Many years ago I learned a lot from a friend about colours and photography. He explained to me that snow white and deep black are „out of place" on models. In the following years I have had the experience that high gloss painted small models of aircraft look especially like toys.
So this time too it was my intention to paint the model of the Caudron only semi gloss.
Apart from that, I think that very shiny color in natura loses shininess very quickly when exposed to the weather.
19 December 2023, 16:38
Boris BThat makes sense, and of course, the way your photos appear on my screen implies a lot of intermediary steps that make it difficultto interpret the real finish of your kit.
I will definitely build this kit one day. Thanks for confirming that for me ! 😉
20 December 2023, 10:29
December 16, 2023
Bernhard Schrockдобави нов проект.
4 14 December 2023, 18:40
Felix TroschierLovely choice Bernhard. I made my first helicopter flight in a Bell 47J! 31 years ago
16 December 2023, 19:22
December 14, 2023
November 26, 2023
Bernhard Schrockдобави нов фотоалбум.
6 26 November 2023, 13:54
November 17, 2024
November 22, 2023
Bernhard Schrockтърси този кит
Bristol Mercury V S2 (PZL P.11c) British air-cooled, 9-cylinder, radial aircraft engine
FPW Model 1:48
48P813 2023 22 November 2023, 10:30
November 18, 2023
wnolder.php?lang=bg
2023-11-18 19:02:24
2013-08-31 15:26:36
14143
/ajax/wnolder.php?lang=bg&sd=2023-11-18 19:02:24&md=2013-08-31 15:26:36&filter=&w=14143
todo