Heller Mirage IVP
Super gap, awesome alignment
2-part epoxy then Mr. Putty R
I used various decals from left over projects
2-part epoxy putty. Then finish off with Mr. White Putty R.
Rescribing completed.
Riveting process. Using different templates
Results of riveting
Polising canopy. First #2000, #2500, #3000. Then polish using Formula 1 Scratch Out
Detailing landing gear. materials include styrene bits, solder wire 0.2mm, 0.3mm, copper wire 0.1mm, masking tape.
Alclad ALC-101 Aluminum
basic green is RLM71 Dark Green. basic grey is XF-66 Light Grey. the other bottles RLM02 and XF-63 is for mottling and color variation
Results of polish. Original canopies were full of scratches
Masking of wheel. I used a Hasegawa Tri-tool circle template to mask the wheels. it is faster that way
After several layers of paint. The blue is a bit too small I think. may need a repaint.
I used Tamiya curved masking tape to make the elliptical boundary
Using OLFA circle cutter with a modified blade so that It can cut until 1mm. originally, it as a limit of 4mm diameter.
rescriber and 0.2mm chisel to improve the surface details.
Коментари
63 20 May 2021, 01:44
Ali YuliantoFantastic work in bringing this old kit back to life. Salut Mas Monty! 👍 👍
20 May 2021, 05:03
Julian Herrero aka YuriGreat work ,,,pls can you show us a picture of your customiswd olfa cutter ?
25 June 2021, 05:10
Danumurthi MahendraHi @Julian I added 2 images of the customized OLFA cutter. In essence, I relocated the blade outside its original location and secure it with tape. To ensure that the needle and blade is firm and do not move, I inserted wire insulator material.
25 June 2021, 07:11
Julian Herrero aka Yurioh ,,, I see ,,, what a simple and clever idea ,,, Thanks for sharing
25 June 2021, 16:14
Danumurthi MahendraThank you @Julian. I made a few trials. once I am confident that the blade is not moving, I could make 2mm diameter circles easily. glad it was helpful
25 June 2021, 17:05
Danumurthi MahendraThis video summarizes in 6 min my struggle with this ancient kit Youtube Video
2 August, 03:10
Album info
I wanted to know how far I can update this old kit with whatever I have on my bench. I have upgraded the kit with new recessed panel lines, new rivets, extensive wiring of all the landing gear, new ejection seats and pilots from Hasegawa, and aftermarket decals from Model Art. Big thanks to @D. Ninetalis who had generously provided the Model Art decal!
A short clip on how I modified the flaps Youtube Video
This video summarizes the struggle to upgrade the kit Youtube Video
