Panther Ausf. A "Late" - Dragon 1/35. Normandie 1944
Коментари
52 23 December 2021, 10:06
![](/profiles/img/43949-838-s.jpg)
After having assembled a few planes at 1/48 ° I wanted to try the tanks of the Second World War at 1/35 °.
I started this editing shortly before a motorcycle accident by going to my work which turned my life upside down. I have been a biker since 1993, I rode in all weathers, daily and I stupidly fell in bad weather at 20 km / h. I had my right shoulder, humerus and collarbone crushed. After a few surgeries and complications, here I am with a shoulder and humerus in titanium and cobalt chrome (Like A Dassault rafale landing gear... 😁😁).
I am not complaining about my fate, there are much worse on earth, but that explains the infinitely long time that I took this assembly as well as others.
The Panther comes to the stage of painting and staging on a diorama, which I have never done so far. I will try to do the best and apply myself to achieve something simple and visually correct.
23 December 2021, 20:13
![](/profiles/img/43949-838-s.jpg)
The "shitty froggy" I am, is very honored to be followed by a subject of her very gracious Majesty ... 😁😉
Many thanks to you Alan!
23 December 2021, 21:02
![](/profiles/img/21096-573-s.jpg)
Nice Panther 🙂
Do not worry about speed, what counts is to enjoy building it and enjoy when it is done
24 December 2021, 00:25
![](/profiles/img/43949-838-s.jpg)
Start of painting. I used the I used the thinned XF-88 Tamiya with a few drops of white. 80% dillution with the Tamiya Levelling thinner. A second application of paint was made with the same XF-88 with few drops of Buff and more White.
24 January 2022, 10:39
![](/profiles/img/56165-775-s.jpg)
I'm interested to see how the decals go on to that zimmerit. I have the Ausf. G in my stash.
24 January 2022, 18:05
![](/profiles/img/43949-838-s.jpg)
Many thanks Alan and John.
I don't know yet if I'm going to use decals or if I'm going to paint the markings, but I'm sure of one thing, if I use decals, I'll need softeners like Micro set and especially Micro sol, due to roughness of the Zimmerit.
I am currently very busy with my job, but as soon as I have availability, I will get back to work. I will post the progress on my Panther. 😉
24 January 2022, 21:39
![](/profiles/img/43949-838-s.jpg)
I also prefer painting, but this is my first armored vehicle model since I took over, so I need to learn about the various painting and weathering techniques before I can be sure what to do next.
24 January 2022, 21:56
![](/profiles/img/43949-838-s.jpg)
Hello,
Beginning of the application of camouflage colors. I'm going to go back to some areas with the base color and highlight the green and redd brown.
8 February 2022, 12:42
![](/profiles/img/43949-838-s.jpg)
Many thanks to you Alan and Simon.
That's the first time i make a camo on a Tank or Vehicule. I like it. For the following painting and weathering steps, I will study the processes to avoid making a mistak
8 February 2022, 15:19
![](/profiles/img/18819-984-s.jpg)
Well, I like your work on this cat. 👍 Keep it comming.
Smash a humerus and collarbone at 20 is pure bad luke. I hope it's all ok now.
I used to Ride motorcycles since 6 years old, lot's of crashes and breaked bonés but the last One with now my wife when She was my girl friend was the end to my motorcycles. Love it but, dangerous when you like to lean hard on curves.
P.s. and yes I also had a metal plate on my right collarbone, but it was afterwards removed.
Best wishes, also for your good looking cat 😉
12 February 2022, 00:42
![](/profiles/img/43949-838-s.jpg)
Many thanks Rui S.
Regarding my shoulder, I have a complete shoulder and humerus prosthesis, the installation of which required the removal of 70% of the tendons from the upper arm.
no more boxing, rugby and motorcycling. I make models... 😊😉
12 February 2022, 09:44
![](/profiles/img/43949-838-s.jpg)
After lightening the undercarriage bolts and nuts, I applied a coat of Tamiya X-22 gloss clearcoat in preparation for the decals and weathering.
12 February 2022, 09:49
![](/profiles/img/77002-712-s.jpg)
Excellent my friend, good work. Now you'll have to work on details 😉
12 February 2022, 09:50
![](/profiles/img/43949-838-s.jpg)
I applied the 'Echelon' decals.
To integrate them into the Zimmerit, I used Micro Sol, a scalpel with a new blade and tapped with a cotton swab. I let it dry, and after the next coat of varnish, I will start weathering.
13 February 2022, 22:51
![](/profiles/img/53404-846-s.jpg)
Looks like the decals have conformed nicely Hugh. Never tried 'Echelon' ones before. Are they nice and thin?
13 February 2022, 23:02
![](/profiles/img/43949-838-s.jpg)
Yes Allan. Echelon decals are of very good quality and they react very well to softeners such as Micro Sol.
13 February 2022, 23:19
![](/profiles/img/43949-838-s.jpg)
G'Day!
I made small scratches with base color, reinforced, in places,with Chipping color from Mig.
Then I applied Pin washes and Filters with artist oils and Mig Filter for tritonnal camo.
Next steps, the exhaust pipes, the tools, the tracks and finally the weathering.
Have a nice weekend.
5 March 2022, 11:09
![](/profiles/img/43949-838-s.jpg)
I've painted the spare tracks. I wanted them to have different shade of oxydation.One pair is almost recent and the others are used. I hope the result is convincing.
7 March 2022, 13:39
![](/profiles/img/43949-838-s.jpg)
I started something that I never practiced. Put mud on a model I've just painted...
Beginning of weathering by the underbody and the metal Master club tracks. I really liked the system for fixing the links using the two resin lugs. It's quite long to install, but I prefer that to the metal wire portions of the Friul type tracks.
For these tracks, I primed them with a dark rust color followed by a passage of "Buff" and Deck Tan. Finally a Track Wash juice. I will finish with pigments, pastel powder and sanding of the rubbing areas.
For the beginning of the underbody clogging which will be quite light in the end, I made a mixture of bicarbonate, very fine gravel from railway decorations, crushed dry grass, desert dust, dry earth and dust pigments.
I will continue with washes, pigments, additions of plant waste, "splashes" and finally, fluid drips, as well as other miscellaneous stains.
24 March 2022, 14:43
![](/profiles/img/99811-836-s.jpg)
Beautiful paintwork as well! Will you also make a diorama for this?
25 March 2022, 06:30
![](/profiles/img/43949-838-s.jpg)
Many thanks Mathias. I bought this Jig few weeks ago. Vehicles Jig (ZEP System MSJ05, No)
I am very satisfied with it.
I've never made a diorama, however I would like to try to make a simple little scene, to start.
25 March 2022, 12:19
![](/profiles/img/99811-836-s.jpg)
Niiice, well I found out, if you know where to find the right materials and what they can be used for, you can make about anything. I learned a lot from
1. Laser creation world (even though I don't have a 3D printer) : Youtube Video 2. Nightshift: Youtube Video,
3. CW Modeling and
Andy's hobby headquarters is also interesting.
![](https://img.youtube.com/vi/W5ZONl86EU4/maxresdefault.jpg)
![](https://img.youtube.com/vi/wE4wvFbf2IU/maxresdefault.jpg)
25 March 2022, 21:12
![](/profiles/img/53404-846-s.jpg)
That's a +1 for Nightshift and Andy's Hobby HQ. Very good youtubers. I'm loving this build of yours Hugh.
26 March 2022, 06:18
![](/profiles/img/43949-838-s.jpg)
As a matter of fact, Nightshift'sjob is really amazing. I like the Tutto to paint a figure. I'll try to paint my first one...
27 March 2022, 07:49
![](/profiles/img/42332-746-s.jpg)
Very nice build! As a returning hobbyist I learn a lot from Nightshift as well
27 March 2022, 10:10
![](/profiles/img/53404-846-s.jpg)
Gone a bit quiet there Hugh. Hope you're doing ok? Was enjoying following this build
12 June 2022, 14:56
![](/profiles/img/43949-838-s.jpg)
Hello Alan. I've had a few health issues that have bothered me for the past few months. Nothing serious in the end. I think I'll get back to it in the next few days, when it's less hot...
17 June 2022, 08:34
![](/profiles/img/53404-846-s.jpg)
Thanks for replying Hugh. Take your time and come back when ready to. Your health comes WAYYYYY before my whining about a stalled build 🙂
17 June 2022, 16:17
![](/profiles/img/43949-838-s.jpg)
Hello,
After a long break I got back to work on this Panther.
Underbody and undercarriage weathering, including tracks.
There are still some accessories to install, such as buckets, jerrycan, towing cable and to retouch the tools on the left side, the metal aspect of which is too pronounced.
Finally, I will finish the weathering with an HB pencil on the different edges and the tracks. I will also try to paint my first figurine and make a small presentation base.
1 September 2022, 12:40