Моделистка база данни | Управител на личния склад
greggles.w
greggles.w
AU

Ambrosini SAI.7

Коментари

33 7 June 2023, 01:14
Villiers de Vos
Looking forward to see how you tackle the challenges.
7 June 2023, 04:05
greggles.w
Thanks! Definitely challenges ahead …
7 June 2023, 08:14
Alex K
Following with great interest. I suppose building a SAI.207 resin kit could be already interesting... but the fact you're going to backdate this and turn it into a SAI.7 racer is the icing on the cake! Respects and good luck!
7 June 2023, 18:50
Robert Podkoński
Taking a seat, of course!
7 June 2023, 19:52
greggles.w
Thanks for your interest Alex & Robert, hope to deliver another update soon ..
8 June 2023, 13:51
David Culp
Modeling with a saw! I always like projects that require sawing. It looks great, and I'll be following.
9 June 2023, 15:27
Michael Kohl
This will be fun to follow. 🙂
9 June 2023, 15:33
Patryk S.
Following!
1 July 2023, 13:22
Ben M
watching as well.
1 July 2023, 14:10
Villiers de Vos
A master at work. Very nice progress.
1 July 2023, 16:27
Ludvík Kružík
I like extensive modifications, rebuilding and scratchbuilding. Your project looks very good. Interesting machine and great range of modifications.
I'm watching with great interest 👀
25 July 2023, 12:59
Michael Kohl
It certainly is fun to follow.
25 July 2023, 17:57
HSC1932
Wow, so many different skills and techniques on display…how do you not run out of motivation with that much work?
25 July 2023, 22:27
Lochsa River
Checking this out.....some great work here...
26 July 2023, 05:21
Bruce Huxtable
Very impressive skills indeed! I'm watching and learning lots 👍
26 July 2023, 06:48
Pierre Pierre
following
26 July 2023, 10:06
greggles.w
Thank you all for taking the time to comment, most appreciated! HSC1933, your query re motivation has had me reflecting. I think it's two things:

One, my opportunity to 'do' the hobby is limited, sporadic & unpredictable, so I spend much more time wistfully thinking of what I might do, some day, whenever I next can. So a more involved project gives me more 'think' to mull over while waiting to 'do'.

Two, my family is beset with perplexing health issues & care needs. I spend much time trying & trying to help & support as needed, however it can often seem like we get nowhere or worse regress. So I take a lot of reassurance from the fact that these projects 'progress' - yes with effort, patience, pause & hold - but they do progress. For this reason my recent completions mean a great deal indeed to me!
26 July 2023, 12:06
Pierre Pierre
it is super impressive may I ask what type of putty you are using ?
28 July 2023, 12:12
greggles.w
Thank you Pierre, very kind. The yellow(ish) putty here is Tamiya two-part epoxy 'Quick Type'. I'm relatively new to using it, but liking it so far. Though don't be too hopeful re 'quick' .. where applied thickly I have waited 12hrs or so before sanding. For some this might be irritatingly slow, but for me - a very slow builder - this is 'quick' enough!
28 July 2023, 12:23
J35J
Very impressive work so far! Great stuff!👍🏻
3 October 2023, 13:07
Alec K
Wow, amazing project. Love that custom scratch work and thank you for the detailed and insightful narrative 👍
20 October 2023, 12:28
Pierre Pierre
Thank you greggle! slow modeller too so i will try to put my hand on as it look dense and easy to sand.
20 October 2023, 13:00
Bruce Huxtable
She's looking very graceful, a true labour of love🙂
20 October 2023, 18:59
komoras
This is true masterwork, amazing! 👍
22 November 2023, 11:22
Alec K
Cowling looks amazing. What thickness styrene have you used for vacuforming?
22 November 2023, 14:29
greggles.w
Thanks both! Alec, for this piece I used 0.5mm / 0.020" sheet. I'm still quite new to vacforming & am still loosing more parts than succeeding! This thickness is my starting point with the inevitable trial-&-error process. In this case it was 'good enough', although resulted in quite a thin lower / rear edge. In the photo showing the inside of the cowl, the top 'plate' held by the tweezers is non-vacformed 0.75mm / 0.30" sheet .. compare that to the vacform sides, which look about 0.2mm at most?
22 November 2023, 22:57
Alec K
Thanks for the info. I have had similar experiences, with each part requiring trial and error runs to get a good final part 👍
25 November 2023, 19:32
Villiers de Vos
A very nice tutorial.
26 November 2023, 09:48
Ludvík Kružík
I really like these big modifications of kits. Perfect work! 👍
26 November 2023, 15:51
Robert Podkoński
I can see the finish line on the horizon... you're a wizard!
29 November 2023, 10:56
Agnius
Impressive work! 👍 Following
29 November 2023, 11:57

Project info

57 снимки
1:48
В ход
1:48 Ambrosini SAI 207 (LF Models 4801)

Всички албуми

Преглед на всички албуми »