Novinky
Samuel1991
chce tohle
chce tohle
F-15E Strike Eagle Dual Roles Fighter w/New Targeting Pod & Ground Attack Weapons
Great Wall Hobby (GWH) 1:48
L4822 2018 Nové díly 3 September, 16:02
Didier Chartrain
přidal nové fotoalbum.
přidal nové fotoalbum.
7 obrázky
French Helicopter Pilot - ALAT - Bust - 1/10Nový: 2 September, 19:40 1:10
Projekt: French Pilot ALAT - Bust
Scratchbuilt
8 2 September, 19:39
Desert Marlin
přidal nové fotoalbum.
přidal nové fotoalbum.
37 8 November 2023, 21:10
Desert Marlin
This project will have both pilots on the intercom and watching the engine startup process. That is why the same type figure is used in both cockpits. They both monitor the engine to ensure that the EGT and RPM is increasing appropriately. Each has their hand on the control stick to be able to open their MIC as they confirm everything is normal at start. The plan is to have the aircraft loaded with a Nuke (Apache Cruise Missile?). Seems appropriate to me for the days we live in now...
This project will have both pilots on the intercom and watching the engine startup process. That is why the same type figure is used in both cockpits. They both monitor the engine to ensure that the EGT and RPM is increasing appropriately. Each has their hand on the control stick to be able to open their MIC as they confirm everything is normal at start. The plan is to have the aircraft loaded with a Nuke (Apache Cruise Missile?). Seems appropriate to me for the days we live in now...
8 November 2023, 22:16
Treehugger
Maybe go for resin seats as well?
Seems like kit plastic never can compete with resin seats. 🙂
Though, I no longer crave for resin interior for the cockpit because of the work, but seats are ok.
Maybe go for resin seats as well?
Seems like kit plastic never can compete with resin seats. 🙂
Though, I no longer crave for resin interior for the cockpit because of the work, but seats are ok.
9 November 2023, 05:17
Desert Marlin
I'll paint these up and see if I can tolerate them. If they are too bland, I have time to change my mind! Thanks for the idea!
I'll paint these up and see if I can tolerate them. If they are too bland, I have time to change my mind! Thanks for the idea!
9 November 2023, 21:25
Desert Marlin
Great video of the weapon that goes with this version of the Mirage 2000N
Youtube Video
Great video of the weapon that goes with this version of the Mirage 2000N
Youtube Video
25 November 2023, 00:46
Desert Marlin
As I have begun work on this kit, I am yet again struck by the lack of information in the variations and options provided in the kit. For example, the tail tip is not called out that applies to the 2000N version. While the nose of the 2000D is provided in the kit, it has to be modified to make it correct for the 2000N. Oh bother…
As I have begun work on this kit, I am yet again struck by the lack of information in the variations and options provided in the kit. For example, the tail tip is not called out that applies to the 2000N version. While the nose of the 2000D is provided in the kit, it has to be modified to make it correct for the 2000N. Oh bother…
20 July, 02:40
Desert Marlin
Selected "most appropriate" tail tip and mounted the correct nose to fuselage.
Selected "most appropriate" tail tip and mounted the correct nose to fuselage.
21 July, 20:04
Desert Marlin
Okay, now I'm excited to get some paint on this cockpit!!! ResKit, you guys have done some great work with your 3D Resin Printing!
Okay, now I'm excited to get some paint on this cockpit!!! ResKit, you guys have done some great work with your 3D Resin Printing!
16 August, 18:29
Treehugger
Oh, did you fiddle with the nose part to make it match the N version, or did you have to buy aftermarket nose for the N version? I have this kit in my stash, but haven't really looked any it yet.
Oh, did you fiddle with the nose part to make it match the N version, or did you have to buy aftermarket nose for the N version? I have this kit in my stash, but haven't really looked any it yet.
28 August, 05:43
Desert Marlin
I'm using the D nose but converting it to an N version. I'm also closing the "sucker doors" on the inlets to represent an engine that is not yet started... I'm assuming initial hydraulic power is applied from the APU and auxiliary hydraulic pumps have brought the gear door up. I'm going to close the speed breaks for pre-engine start configuration...
I'm using the D nose but converting it to an N version. I'm also closing the "sucker doors" on the inlets to represent an engine that is not yet started... I'm assuming initial hydraulic power is applied from the APU and auxiliary hydraulic pumps have brought the gear door up. I'm going to close the speed breaks for pre-engine start configuration...
28 August, 17:36
Eric Thornton
Looks like BAM has some corrected noses still need the N one. Maybe reach out to him. I could use the corrected nose for this kit also. The Reskit stuff looks amazing.
bam-models.com/produ..2000-corrected-nose/
Looks like BAM has some corrected noses still need the N one. Maybe reach out to him. I could use the corrected nose for this kit also. The Reskit stuff looks amazing.
bam-models.com/produ..2000-corrected-nose/
30 August, 13:57
Desert Marlin
Thanks for the heads up! The BAM nose looks fantastic! Sadly, the 2000N nose has a pitot tube and does not have the RDY antenna lines. It seems that much of the 2000N systems are somewhat earlier than the -5 systems. Everything I can find on the 2000N seems to be somewhat austere compared with the 2000-5. The ResKit cockpit is worth every penny!
Thanks for the heads up! The BAM nose looks fantastic! Sadly, the 2000N nose has a pitot tube and does not have the RDY antenna lines. It seems that much of the 2000N systems are somewhat earlier than the -5 systems. Everything I can find on the 2000N seems to be somewhat austere compared with the 2000-5. The ResKit cockpit is worth every penny!
30 August, 14:59
Mr D
Like it 😀👍
Nice when the pilot looks like he's actually doing something and engaged with the craft.
Like it 😀👍
Nice when the pilot looks like he's actually doing something and engaged with the craft.
30 August, 15:22
Desert Marlin
Thanks. It's really sad to remove detail from the ejection seat, but that is the only way to get the pilot in place...
Thanks. It's really sad to remove detail from the ejection seat, but that is the only way to get the pilot in place...
30 August, 22:47
Desert Marlin
The pilot is from REEDOAK. They have several different figures in various poses so the realism can be developed based on the aircraft scenario. This model is being build to represent events just prior to engine start.
The pilot is from REEDOAK. They have several different figures in various poses so the realism can be developed based on the aircraft scenario. This model is being build to represent events just prior to engine start.
31 August, 01:50
Desert Marlin
Remaining cockpit items:
1. Glass
2. Decals on seats
3. A little more weathering
4. Fix pilot's France Flag
5. Add WSO's Right shoulder patch
6. Check that I can get the canopy actuators in after everything is assembled...
7. Add HUD glass
Remaining cockpit items:
1. Glass
2. Decals on seats
3. A little more weathering
4. Fix pilot's France Flag
5. Add WSO's Right shoulder patch
6. Check that I can get the canopy actuators in after everything is assembled...
7. Add HUD glass
1 September, 03:07
Desert Marlin
The glass and HUD went in great! I had to lightly sand the edge of the glass to get it to fit snugly into the ResKit frame between the front and back seats. I used 1000 grit and lightly buffed all the way around the edge. Fits perfectly!
The glass and HUD went in great! I had to lightly sand the edge of the glass to get it to fit snugly into the ResKit frame between the front and back seats. I used 1000 grit and lightly buffed all the way around the edge. Fits perfectly!
3 September, 16:01
Bernhard Schrock
přidal nové fotoalbum.
přidal nové fotoalbum.
2 obrázky
Piasecki HUP-1Nový: 2 September, 18:56 1:48
I recommend to use wire for installing of the stuff on the bottom.So you can align everything better and it becomes more...
Projekt: Piasecki HUP-1 Retreiver
4 2 September, 18:55
Duster_d
přidal nové fotoalbum.
přidal nové fotoalbum.
19 obrázky
Super Etendard (Academy\Modelist)Nový: 3 September, 16:00 1:72
The brave Argentine "Etendard" number "02" is finished.
Projekt: Super Etendard (Academy\Modelist)
29 17 August, 09:21
Cristian A
Excellent project, watching. The Argentine Étendard aircraft were effective in causing significant damage during the Falklands/Malvinas conflict.
Excellent project, watching. The Argentine Étendard aircraft were effective in causing significant damage during the Falklands/Malvinas conflict.
29 August, 21:11
Mike Volkov
označil tuto položku jako objednanou
označil tuto položku jako objednanou
Remove Before Flight/Warning Flags NATO One-Shot Decals
Heroes Models 1:144
HM-OS14413 2019 Nová forma 3 September, 15:56
Kim Harris
přidal nové fotoalbum.
přidal nové fotoalbum.
8 obrázky
A-Model 1:72 Diamond DA421:72
I hope the canopy is OK under the masking. The gear is not well moulded but it should be acceptableonce really dry in a ...
Projekt: A-Model Diamond DA42
15 26 August, 18:31
Oleg Bogolei
Haha) Good luck with it! I'm stuck with the UAV version on a putting/sanding and he's waiting for the next inspiration to come)
Haha) Good luck with it! I'm stuck with the UAV version on a putting/sanding and he's waiting for the next inspiration to come)
27 August, 06:27
Kim Harris
Oleg, I understand now. I think that is basically the same kit with different boxart and instructions because mine has about 30% parts not used including the long nose on the Dominator.
Oleg, I understand now. I think that is basically the same kit with different boxart and instructions because mine has about 30% parts not used including the long nose on the Dominator.
27 August, 14:48
Alex K
A general aviation aircraft, a demanding kit, and a project with personal/family connection... > I'll be glad to follow your efforts - good luck!
A general aviation aircraft, a demanding kit, and a project with personal/family connection... > I'll be glad to follow your efforts - good luck!
30 August, 16:56
MP_MP
The UAV version hasn't got any clear windows included
Was a bit tricky to build at times but fun.
Will be nice to see a GA version build. Thinking of getting that one as well.
The UAV version hasn't got any clear windows included
Was a bit tricky to build at times but fun.
Will be nice to see a GA version build. Thinking of getting that one as well.
30 August, 20:53
Gordon Sørensen
Looks like a challenging kit with lots of small pieces and lots of flash.
It looks like the 'cooling fins' are suppose to be mounted from the inside of the nacelle, not on top…
Looks like a challenging kit with lots of small pieces and lots of flash.
It looks like the 'cooling fins' are suppose to be mounted from the inside of the nacelle, not on top…
2 September, 00:58
Kim Harris
Gordon. I just checked and you are absolutely correct. I will try to remove it and insert the relevant part from above. I need yo figure out a way to remove a glued on part that has been primed with minimal damage. What an idiotic thing to do.
Gordon. I just checked and you are absolutely correct. I will try to remove it and insert the relevant part from above. I need yo figure out a way to remove a glued on part that has been primed with minimal damage. What an idiotic thing to do.
2 September, 10:14
Ben M
I find working tamiya extra thin into the joint allows it to be loosened up and pulled apart.
I find working tamiya extra thin into the joint allows it to be loosened up and pulled apart.
2 September, 13:21
Kim Harris
Ben, thank you for your suggestion. I will try that! Otherwise I will be deploying a razor saw and putty 😀
Ben, thank you for your suggestion. I will try that! Otherwise I will be deploying a razor saw and putty 😀
3 September, 06:37
Дмитрий Голубев
přidal nové fotoalbum.
přidal nové fotoalbum.
12 2 September, 07:00
Neuling
Good work on details. Paintwork, weathering and damage effect are very appealing.
Good work on details. Paintwork, weathering and damage effect are very appealing.
2 September, 09:05
/cs/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=cs
35
35
/cs/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo