Novinky
Roland Sachsenhofer
přidal nové fotoalbum.
přidal nové fotoalbum.
24 obrázky
T-38A The White RocketNový: 12 September, 17:34 1:48
Projekt: T-38A Talon 'The White Rocket'
17 1 September, 06:57
Roland Sachsenhofer
Besides Martin Mars, there are other projects going on - although 'side project' always sounds so disrespectful. In reality, these are models that really excite me, the kits are excellent, with a few goodies you can add a little more value, and the original machines are a dream anyway!
Just like here: I'll show you 'The White Rocket'! This T-38A Talon was used by the Mercury astronauts as a training device, another interesting story. The kit from Wolfpack is good, but a few etched parts from Eduard in the cockpit and above all the 3D print of the two jets at the rear increase the degree of realism even further.
Besides Martin Mars, there are other projects going on - although 'side project' always sounds so disrespectful. In reality, these are models that really excite me, the kits are excellent, with a few goodies you can add a little more value, and the original machines are a dream anyway!
Just like here: I'll show you 'The White Rocket'! This T-38A Talon was used by the Mercury astronauts as a training device, another interesting story. The kit from Wolfpack is good, but a few etched parts from Eduard in the cockpit and above all the 3D print of the two jets at the rear increase the degree of realism even further.
1 September, 07:05
Roland Sachsenhofer
These five pictures show the latest status: the surfaces, decals included, are finished, now the assembly of the various antennas, sensors, landing gear, airbrakes, pitot tube, canopy.... canopy can begin! So, at least the final is already in sight 🙂
These five pictures show the latest status: the surfaces, decals included, are finished, now the assembly of the various antennas, sensors, landing gear, airbrakes, pitot tube, canopy.... canopy can begin! So, at least the final is already in sight 🙂
8 September, 15:54
Roland Sachsenhofer
This build has now come to an end: a generally pleasing modelling experience, even if I was a little disappointed with this - for me - first Wolfpack kit: the fit of the parts was wonderful, the detailing was pleasing - for example in the cockpit area and the well-represented complex hinge mechanisms of the two cockpit canopies. But then: the undercarriage, airbrakes, the turbine outlets... it was all rather 'meagre'.... Accordingly, some improvements were needed here: a cockpit interior set from Eduard and an etched parts set that helped to detail the undercarriage and - very helpfully - the airbrakes. The fabulous nozzles from ResKit were also a really good investment! I love the decals and also the decal version from Wolfpack: in the look presented here, this T-38A 'The White Rocket' was flown by Deke Slayton and 'Wally' Shirra in the astronaut training of the Mercury programme - a fact that fascinated me.
This build has now come to an end: a generally pleasing modelling experience, even if I was a little disappointed with this - for me - first Wolfpack kit: the fit of the parts was wonderful, the detailing was pleasing - for example in the cockpit area and the well-represented complex hinge mechanisms of the two cockpit canopies. But then: the undercarriage, airbrakes, the turbine outlets... it was all rather 'meagre'.... Accordingly, some improvements were needed here: a cockpit interior set from Eduard and an etched parts set that helped to detail the undercarriage and - very helpfully - the airbrakes. The fabulous nozzles from ResKit were also a really good investment! I love the decals and also the decal version from Wolfpack: in the look presented here, this T-38A 'The White Rocket' was flown by Deke Slayton and 'Wally' Shirra in the astronaut training of the Mercury programme - a fact that fascinated me.
12 September, 17:40
Skyhiker
Roland it is amazing how you keep whipping out these high quality models. What's your secret? You must have quite a collection by now.
Roland it is amazing how you keep whipping out these high quality models. What's your secret? You must have quite a collection by now.
13 September, 12:52
Nathan Dempsey
přidal nové fotoalbum.
přidal nové fotoalbum.
49 22 July, 21:16
Nathan Dempsey
Welcome Torsten & Robert!
I've started the fuselage assembly and clamps were needed.
Welcome Torsten & Robert!
I've started the fuselage assembly and clamps were needed.
27 July, 15:43
Dutch
Nathan, I am following along as well. I have friends in eastern Ukraine, so very interested in this one. Kind regards, Dutch
Nathan, I am following along as well. I have friends in eastern Ukraine, so very interested in this one. Kind regards, Dutch
31 July, 20:47
Nathan Dempsey
Welcome Dutch! This build is turning into a slog. Clamps and super-glue "force-holds" galore. Luckily it is a tiny plane so I'm nearly done already, just completing all the seam sanding.
Welcome Dutch! This build is turning into a slog. Clamps and super-glue "force-holds" galore. Luckily it is a tiny plane so I'm nearly done already, just completing all the seam sanding.
1 August, 18:44
Nathan Dempsey
Working on the cowl. I had to use 2-part epoxy clay to fill a large gap on the bottom of the cowl that was created by making the cowl fit straight & level.
Working on the cowl. I had to use 2-part epoxy clay to fill a large gap on the bottom of the cowl that was created by making the cowl fit straight & level.
8 August, 20:53
Dutch
Looking good. Keep up the progress. The splinter pattern will be stupendous when done.
Looking good. Keep up the progress. The splinter pattern will be stupendous when done.
13 August, 16:03
Nathan Dempsey
Thanks Dutch! Man I just realized looking at pictures that the wing camo is a mirror image for the other wing. It won't be perfect… 😁
Thanks Dutch! Man I just realized looking at pictures that the wing camo is a mirror image for the other wing. It won't be perfect… 😁
13 August, 20:47
Nathan Dempsey
Welcome to the show Ben! I've applied the first color today. Now off to cut masks for the next color. I've been spoiled by those pre-cut masks…
Welcome to the show Ben! I've applied the first color today. Now off to cut masks for the next color. I've been spoiled by those pre-cut masks…
16 August, 17:41
Dutch
Nathan, quick question. Why not just spray the first color overall, then mask only the subsequent colors? Saves at least one step, I should think. Carry on. I am enjoying the show.
Nathan, quick question. Why not just spray the first color overall, then mask only the subsequent colors? Saves at least one step, I should think. Carry on. I am enjoying the show.
16 August, 17:47
Nathan Dempsey
In this case I just got a little too happy masking. I even decided against my usual preshade since this plane's paint looks really new in all the pictures.
In this case I just got a little too happy masking. I even decided against my usual preshade since this plane's paint looks really new in all the pictures.
17 August, 17:20
Dutch
Nathan, are you going to put kill markings on it?
google.com/url?sa=t&..e2eYFcXbT_ewibuKmesM
Nathan, are you going to put kill markings on it?
google.com/url?sa=t&..e2eYFcXbT_ewibuKmesM
18 August, 20:13
Nathan Dempsey
Well my printer is dead, but my dad has a similar one so I'm going to try… Wish me luck.
Well my printer is dead, but my dad has a similar one so I'm going to try… Wish me luck.
19 August, 17:35
Nathan Dempsey
The second color has been applied. Slow going here as my workbench time has been lacking.
The second color has been applied. Slow going here as my workbench time has been lacking.
25 August, 14:13
Nathan Dempsey
Thanks Dutch! Today I masked off the areas for the gloss black. The tan colored areas are quite small, but they're everywhere. Tamiya tape stock is going up!!
Thanks Dutch! Today I masked off the areas for the gloss black. The tan colored areas are quite small, but they're everywhere. Tamiya tape stock is going up!!
26 August, 17:32
Nathan Dempsey
Well my gloss black was solidified, so flat black will have to do. Hopefully it will all even out when the clear is applied
Well my gloss black was solidified, so flat black will have to do. Hopefully it will all even out when the clear is applied
28 August, 00:20
Nathan Dempsey
Thanks Jennifer and Villiers!
Work continues on masking these tiny sections.
Thanks Jennifer and Villiers!
Work continues on masking these tiny sections.
30 August, 16:13
Nathan Dempsey
Well that was a whole bunch of masking for some very tiny pixels… I also added a coat of Future to help with the panel lining effort to come.
Well that was a whole bunch of masking for some very tiny pixels… I also added a coat of Future to help with the panel lining effort to come.
3 September, 23:57
Nathan Dempsey
Today has seen the underside color selected and applied (Tamiya X-14 Sky Blue) along with masking/painting the cowl colors using Steel & Red.
Today has seen the underside color selected and applied (Tamiya X-14 Sky Blue) along with masking/painting the cowl colors using Steel & Red.
4 September, 13:58
Nathan Dempsey
I'm using both AK & Mig panel wash. For the bottom I used Grey-Blue and for the top I haven't decided whether I'll use a dark brown or black wash. Of course for the black areas I'll use the Stone Grey wash which I think is Mig.
I'm using both AK & Mig panel wash. For the bottom I used Grey-Blue and for the top I haven't decided whether I'll use a dark brown or black wash. Of course for the black areas I'll use the Stone Grey wash which I think is Mig.
4 September, 18:28
Nathan Dempsey
Thanks LC & Guy!
More masking for the Ukrainian flag on the tail today.
Thanks LC & Guy!
More masking for the Ukrainian flag on the tail today.
6 September, 01:59
Nathan Dempsey
Thanks Robert!
Chrome Yellow has been applied for the first half of the Ukrainian flag on the tail.
Thanks Robert!
Chrome Yellow has been applied for the first half of the Ukrainian flag on the tail.
6 September, 14:53
Nathan Dempsey
The Ukrainian flag on the tail has been completed and the landing gear legs have been painted and attached.
The Ukrainian flag on the tail has been completed and the landing gear legs have been painted and attached.
7 September, 23:01
Nathan Dempsey
Thanks Dutch! Today I completed painting the canopy framing and the wheels. Also my clear gloss arrived in the mail today, so I'll be able to apply that to the entire aircraft. After that I only need to paint the anti-glare panel on the upper cowl. Nearing the finish line.
Thanks Dutch! Today I completed painting the canopy framing and the wheels. Also my clear gloss arrived in the mail today, so I'll be able to apply that to the entire aircraft. After that I only need to paint the anti-glare panel on the upper cowl. Nearing the finish line.
9 September, 20:31
Dutch
Ooh-la-la! Well done Nathan. Definitely a special addition to the display case.
Ooh-la-la! Well done Nathan. Definitely a special addition to the display case.
10 September, 15:54
Mr D
přidal nové fotoalbum.
přidal nové fotoalbum.
44 obrázky
Romanian lAR-80 Fighter Nový: 13 September, 12:48 1:48
Starting to get it's shape now, with the cowling fitted, a bit of the yellow paint behind prop shaft....the colour conti...
Projekt: Hobbyboss IAR-80
Scratchbuilt
20 13 August, 21:46
Mr D
Thanks, Appreciate the interest, lm reality new to the hobby about 14 months, finding my way with techniques.
Weathering n panel lines need more learning.
The IAR-80 was decent price from HB and liked the paint scheme...bit different
👍👍
Thanks, Appreciate the interest, lm reality new to the hobby about 14 months, finding my way with techniques.
Weathering n panel lines need more learning.
The IAR-80 was decent price from HB and liked the paint scheme...bit different
👍👍
18 August, 13:25
Mr D
Thanks J35.
Nice to have the interest, HB instructions bit weak!
They said to paint interior charcoal black like on the FW-190.
But l checked n the Romanian lAR interior was grey/blue.
Engine building next 6 parts deal.
Cheers 😃👍
Thanks J35.
Nice to have the interest, HB instructions bit weak!
They said to paint interior charcoal black like on the FW-190.
But l checked n the Romanian lAR interior was grey/blue.
Engine building next 6 parts deal.
Cheers 😃👍
20 August, 11:14
Mr D
Good to have you along Miguel, engine n wings next,
A small amount of the wing is seen through bottom of cockpit, the HB instructions didn't mention painting it first!!
But the fit of the model be ok so far.
👍👍
Good to have you along Miguel, engine n wings next,
A small amount of the wing is seen through bottom of cockpit, the HB instructions didn't mention painting it first!!
But the fit of the model be ok so far.
👍👍
21 August, 09:08
Miguel Vaquero
Love the idea of filling with acrylic, never thought about it. Does it hold well though time?
Love the idea of filling with acrylic, never thought about it. Does it hold well though time?
26 August, 13:14
Mr D
Hi, Yes lve used it alot and holds up really well , l find the fillers a bit messy and more trouble than it's worth on small gaps.
You do need to allow overnight drying with it for best sanding results.
😀👍
Hi, Yes lve used it alot and holds up really well , l find the fillers a bit messy and more trouble than it's worth on small gaps.
You do need to allow overnight drying with it for best sanding results.
😀👍
26 August, 13:42
Doubtingmango
Brilliant! The putty really can create a mess with finely molded details
Brilliant! The putty really can create a mess with finely molded details
26 August, 15:01
Mr D
Yes it has a habit of filling in panel lines n bits not necessary!!
This technique is same as using alot of paint to fill a gap or high build primer ect...just becomes part of the paint layer as it acrylic too.
But it's not for big gaps!! As there is a bit of shrinking overnight.
Be onto marking rivets next step after sanding... Then need to make choices on open or closed canopy???
Yes it has a habit of filling in panel lines n bits not necessary!!
This technique is same as using alot of paint to fill a gap or high build primer ect...just becomes part of the paint layer as it acrylic too.
But it's not for big gaps!! As there is a bit of shrinking overnight.
Be onto marking rivets next step after sanding... Then need to make choices on open or closed canopy???
26 August, 19:18
Kesa Tiho
If anyone dare look away from that then every romanian within a 20 km radius will undo all your progress like a bunch of wolves eating a sheep
If anyone dare look away from that then every romanian within a 20 km radius will undo all your progress like a bunch of wolves eating a sheep
26 August, 19:29
Mr D
Thanks Mike 👋😀👍.
Ive got the canopy on now, HB do nice clear glass, so I'm having a closed cockpit,
So bit of masking to do there next.
Ive got X2 builds on the go at min.
All the best 👍👍
Thanks Mike 👋😀👍.
Ive got the canopy on now, HB do nice clear glass, so I'm having a closed cockpit,
So bit of masking to do there next.
Ive got X2 builds on the go at min.
All the best 👍👍
30 August, 19:09
Miguel Vaquero
I got to get myself a chrome pen. The result on those details look awesome
I got to get myself a chrome pen. The result on those details look awesome
4 September, 09:53
Mr D
Thanks Miguel, the pen needs a good shake prior to use , if it awkward area you can pump some out n use brush...but work fast.
Best to put a clear over next day as it's bit delicate.
Thanks Miguel, the pen needs a good shake prior to use , if it awkward area you can pump some out n use brush...but work fast.
Best to put a clear over next day as it's bit delicate.
4 September, 09:58
Mr D
přidal nové fotoalbum.
přidal nové fotoalbum.
52 obrázky
Beriev Be-6 flying boat/ By Playfix -Veb -Plasticart &Revell /72No
Getting near to paint stage, the tail has X2 vertical stabilisers to go on,
Couple of rigging hooks, the engine cowli...
Scratchbuilt
24 24 July, 16:32
Mr D
Thanks for the likes 😁👍 it's interesting to see how a 33 year old kit builds up ??
Thanks for the likes 😁👍 it's interesting to see how a 33 year old kit builds up ??
1 August, 15:31
Edouard Carr
Great idea about the watch pins! ⌚ Definitely gonna try this out on my builds. Looking forward to the finished result.
Great idea about the watch pins! ⌚ Definitely gonna try this out on my builds. Looking forward to the finished result.
1 September, 08:43
Mr D
Hi Edouard👋😀👍.
Yes l just get cheap ones of eBay, the do different sizes, you can pull ends n spring out for barrel look, or file ends last to have a recoil cannon look.
The gun turret nearly there now....lots of sanding n filling low spot.
Thanks for looking in on build.👍👍
Hi Edouard👋😀👍.
Yes l just get cheap ones of eBay, the do different sizes, you can pull ends n spring out for barrel look, or file ends last to have a recoil cannon look.
The gun turret nearly there now....lots of sanding n filling low spot.
Thanks for looking in on build.👍👍
1 September, 13:24
Zbynek Honzik
I'm very curious to see the result. I built this model as a young boy too.
I'm very curious to see the result. I built this model as a young boy too.
4 September, 20:22
Mr D
Hi Zbynek 👋🙂👍.
Thanks for your interest. Nice to know you had it too, l built X3 the Tu airliner and the bomber. But this was my favourite as l liked the shape and that it had floats n guns.
Got part of tail on this evening.
Keep looking in for updates 😃👍👍
Hi Zbynek 👋🙂👍.
Thanks for your interest. Nice to know you had it too, l built X3 the Tu airliner and the bomber. But this was my favourite as l liked the shape and that it had floats n guns.
Got part of tail on this evening.
Keep looking in for updates 😃👍👍
4 September, 20:57
Mr D
Good to have you along Guy 👋😃.
Bit of fine sanding n tidying to do next then look at getting an engine effect in cowling area.
I replaced side vent for smaller one now, checked photos... and l made it way to big.
Catch you on the next steps.
Good to have you along Guy 👋😃.
Bit of fine sanding n tidying to do next then look at getting an engine effect in cowling area.
I replaced side vent for smaller one now, checked photos... and l made it way to big.
Catch you on the next steps.
7 September, 20:15
Edouard Carr
Hey Mr D whats the Gorilla Glue like? Is it a clear PVA or a resin Super Glue Type? Do you use it just for clear bits or as n all purpose? Thanks in advance E.
Hey Mr D whats the Gorilla Glue like? Is it a clear PVA or a resin Super Glue Type? Do you use it just for clear bits or as n all purpose? Thanks in advance E.
12 September, 21:46
Mr D
Hi, it dries 100% clear but is slow.. to air dry ..so leave overnight.
But it's worth it as very strong. And is very neutral on paint and clear parts.
It's almost like an air drying epoxy, not harsh like super glue or poli ...very safe.
I only use it on clear stuff as it's stronger than PVA but not good for general building.. l do use it to fill gaps sometimes.
👍
Hi, it dries 100% clear but is slow.. to air dry ..so leave overnight.
But it's worth it as very strong. And is very neutral on paint and clear parts.
It's almost like an air drying epoxy, not harsh like super glue or poli ...very safe.
I only use it on clear stuff as it's stronger than PVA but not good for general building.. l do use it to fill gaps sometimes.
👍
13 September, 10:34
Mike Montgomery
Don't think I'd trust those decals. The red stars are easy enough to replace or paint on, the bort numbers might be more of a challenge.
Don't think I'd trust those decals. The red stars are easy enough to replace or paint on, the bort numbers might be more of a challenge.
13 September, 12:47
Roberto
přidal nové fotoalbum.
přidal nové fotoalbum.
13 September, 12:45
Tzonglin Wu
přidal nové fotoalbum.
přidal nové fotoalbum.
83 24 July, 03:09
Thomas Kolb
That weathering looks awesome. What technique did you use? Just oil paints?
That weathering looks awesome. What technique did you use? Just oil paints?
9 August, 10:20
Cuajete
Very nice painting job and weathering 👍. I have the same question that Thomas.
Very nice painting job and weathering 👍. I have the same question that Thomas.
9 August, 17:31
Tzonglin Wu
Thank you all for your likes.
For me, this time is also an experiment. It's my first time to build a kit like this way.
I'm looking for a quick way to save time while I'm busy at work.
This time I didn't use primer or do pre-shading.
I airbrushed whole fuselage with the main color.
Then refer to photos, hand brushed the darker and lighter colors to create difference.
I think this make the shade effect.
Until this process, only water-based acrylic paint had been used.
In the #13~#15 pictures shown, I have used Mr. Weathering's black to create the panel line.
Yesterday, I covered the plane with mat varnish, I found that the contrast became smaller.
I think I should increase the contrast before the mat varnish in the future.
My weathering process is not over yet.
Oil paints, color pencils, etc. may be used to enhance the effect.
Thank you all for your likes.
For me, this time is also an experiment. It's my first time to build a kit like this way.
I'm looking for a quick way to save time while I'm busy at work.
This time I didn't use primer or do pre-shading.
I airbrushed whole fuselage with the main color.
Then refer to photos, hand brushed the darker and lighter colors to create difference.
I think this make the shade effect.
Until this process, only water-based acrylic paint had been used.
In the #13~#15 pictures shown, I have used Mr. Weathering's black to create the panel line.
Yesterday, I covered the plane with mat varnish, I found that the contrast became smaller.
I think I should increase the contrast before the mat varnish in the future.
My weathering process is not over yet.
Oil paints, color pencils, etc. may be used to enhance the effect.
12 August, 07:04
Romain Sablou
Nice weathering, we can clearly see that you worked closely with photos references. What did you use for the main color ?
Nice weathering, we can clearly see that you worked closely with photos references. What did you use for the main color ?
14 August, 04:41
Tzonglin Wu
Hi, Romain. I mixed that color by myself. I selected a photo as reference and mixed grey, blue, black and white to approach the photo.
Hi, Romain. I mixed that color by myself. I selected a photo as reference and mixed grey, blue, black and white to approach the photo.
12 September, 06:29
Romain Sablou
Final picts are top-notch, so as the model in itself ! Damn, I've got the same kit waiting in stash, but you set the bar high !
Final picts are top-notch, so as the model in itself ! Damn, I've got the same kit waiting in stash, but you set the bar high !
13 September, 12:41
Jeff Kosty
vlastní tuto položku
vlastní tuto položku
F/A-18A/B/C/D Hornet Seamless Intake Set (+ bulged tire/wheels)
RHINO MODELWORKS 1:32
RM32004 13 September, 12:41
/cs/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=cs
35
35
/cs/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo