Novinky
Irineu Junior
přidal nové fotoalbum.
přidal nové fotoalbum.
29 21 December 2023, 23:10
Irineu Junior
Thanks Michael! I've always wanted to build a rally car like this!
I'll try to keep that album updated.
Thanks Michael! I've always wanted to build a rally car like this!
I'll try to keep that album updated.
22 December 2023, 19:16
Irineu Junior
Chassis painted with spray. I'll take the paint off the can and use in airbrush.
It will be easier to control the flow, mainly on the body.
Chassis painted with spray. I'll take the paint off the can and use in airbrush.
It will be easier to control the flow, mainly on the body.
23 February, 19:37
bossy122
Having done one of these recently, I will give you a heads up that the decals canbe a tad brittle, especially the big ones going across the doors. LOTS of softener needed. PS: beautiful seal point.
Having done one of these recently, I will give you a heads up that the decals canbe a tad brittle, especially the big ones going across the doors. LOTS of softener needed. PS: beautiful seal point.
24 February, 18:44
Irineu Junior
Thanks, folks! I'll try to update frequently.
Good tip, @bossy122, thank you!
I messed up a lot with the panel line scraper, had to fix with CA and sandpaper…
Thanks, folks! I'll try to update frequently.
Good tip, @bossy122, thank you!
I messed up a lot with the panel line scraper, had to fix with CA and sandpaper…
24 February, 20:12
Irineu Junior
Body painted, with airbrush and decanted TS-50. Next steps: decals and clear coat.
Body painted, with airbrush and decanted TS-50. Next steps: decals and clear coat.
2 June, 21:39
Jorge Ferreira
Well what can I say. Was it beginners luck or a skillfull modeller ? Those decals look great. I`ve build 4 and the decals were a nightmare. Congratulations. 😊👌
Well what can I say. Was it beginners luck or a skillfull modeller ? Those decals look great. I`ve build 4 and the decals were a nightmare. Congratulations. 😊👌
11 August, 20:16
Irineu Junior
Thank you Jorge and Stéphane! I've been building it at a slow pace, getting a lot of help from forums and videos.
Thank you Jorge and Stéphane! I've been building it at a slow pace, getting a lot of help from forums and videos.
12 August, 09:37
Irineu Junior
Way to connect the rear spoiler, and getting ready for final assembly.
Way to connect the rear spoiler, and getting ready for final assembly.
7 September, 17:52
Irineu Junior
Almost done! After messing up the yellow neon decal, I painted it and varnished it, ready for the final assembly.
Almost done! After messing up the yellow neon decal, I painted it and varnished it, ready for the final assembly.
13 October, 23:17
Mark Sherwood
přidal nové fotoalbum.
přidal nové fotoalbum.
5 13 October, 13:25
Lebloge
we are in the presence of a man of taste… Leffe blonde… triple Westmalle « que du bon »😄
we are in the presence of a man of taste… Leffe blonde… triple Westmalle « que du bon »😄
13 October, 15:05
Mark Sherwood
Zybnek, Ben M 👍 it's cosy, stick a cd or record on and zone out modelling. Martin probably 🤣 Lebloge 👍 I have a few bottles of Duvel and La Chouffe too. Here's to escaping Thee Wife and the DIY It's either T'Club or the Box Room. 🤣🤘🥸🤟🤣
Zybnek, Ben M 👍 it's cosy, stick a cd or record on and zone out modelling. Martin probably 🤣 Lebloge 👍 I have a few bottles of Duvel and La Chouffe too. Here's to escaping Thee Wife and the DIY It's either T'Club or the Box Room. 🤣🤘🥸🤟🤣
13 October, 16:35
Mark Sherwood
Lebloge, Tetley's Imperial and you're right Beer or Modelling not both at the same time 😳🤣 Nicolas I agree. It's terrible that he succumbed to Alzheimer's. No more Discworld adventures.
Lebloge, Tetley's Imperial and you're right Beer or Modelling not both at the same time 😳🤣 Nicolas I agree. It's terrible that he succumbed to Alzheimer's. No more Discworld adventures.
13 October, 17:19
Rui S
And a big Windows and WC near by 😄 😄 😄 but I don't see a Bench, where do you build them?
And I disagree. Alcohol and model making are perfectly compatible, even your hands feel more firm, and steady 😄 😄 and if you mess things up you can blaim the licor and not your clumsiness or lack of tallent. I've a small fridge in my cave, só i know it hehe
And a big Windows and WC near by 😄 😄 😄 but I don't see a Bench, where do you build them?
And I disagree. Alcohol and model making are perfectly compatible, even your hands feel more firm, and steady 😄 😄 and if you mess things up you can blaim the licor and not your clumsiness or lack of tallent. I've a small fridge in my cave, só i know it hehe
13 October, 23:16
RailgunMikoto
dokončil tuto položku
dokončil tuto položku
Kodiak Swiss Series/German Demonstrator, AEV-3 Pionierpanzer (2 in 1)
Border Model 1:35
BT-011 2023 Nové díly 13 October, 23:13
George
označil tuto položku jako objednanou
označil tuto položku jako objednanou
Challenger ARRV (CrARRV) Tamiya Challenger-1 35154, 35134, Challenger-2 35274
Accurate Armour 1:35
C024 1992 Nová forma 13 October, 23:09
RailgunMikoto
dokončil tuto položku
dokončil tuto položku
MAZ-537G Late Production type with ChMZAP-9990 semi-trailer
Trumpeter 1:35
01065 2019 Nové díly Multitéma (2)13 October, 23:09
Mathias Decommere
přidal nové fotoalbum.
přidal nové fotoalbum.
21 obrázky
The calm before the storm (Eve of TET 1968)Nový: 13 October, 22:58 1:35
Projekt: Vietnamwar_gb2024
Scratchbuilt
13 1 September, 18:19
Mona
looking forward to seeing more of this project👍.my uncle(5th SF) was in country just after TET and one of the few things he ever... spoke of more than once, was about riding on top of a M113 that rolled over a mine
looking forward to seeing more of this project👍.my uncle(5th SF) was in country just after TET and one of the few things he ever... spoke of more than once, was about riding on top of a M113 that rolled over a mine
12 October, 18:07
Mathias Decommere
Thank you Mona, that must have been a terrifying experience. The idea would be a fortified position in the Mekong Delta. I'm planning to build a sandback bunker and a piece of ricefield. The M113's will be stationary in a defensive position. Soldiers will be relaxed not knowing what is coming. But the layout is still evolving. Haven't decide the size of the groundwork yet. I'll be starting the diorama base soon... Will be continued 😉
Thank you Mona, that must have been a terrifying experience. The idea would be a fortified position in the Mekong Delta. I'm planning to build a sandback bunker and a piece of ricefield. The M113's will be stationary in a defensive position. Soldiers will be relaxed not knowing what is coming. But the layout is still evolving. Haven't decide the size of the groundwork yet. I'll be starting the diorama base soon... Will be continued 😉
13 October, 08:21
Spanjaard » Požadavky na funkce
When i go to contribute page, I see the kits that i have that are missing instructions in the database. but for the looks of it, the page only shows first 15. every time I scan a new one and add it to the database, I see a new kit appearing in the page. It will help a lot if we can see the complete list and be able to pick several ones in one go (for example if you do not have them all in the same room)..... please correct the page to show them all. maybe a limit of 3000 or something, like when you see your stash, etc. that will not be a problem for most of us 😉 . if the query in the database makes that page slow, and you want to keep it fast for those that only want to add new kits, materials, tools etc, then show the 15 it does now, and add a button to show the rest for those who need it.
When i go to contribute page, I see the kits that i have that are missing instructions in the database. but for the looks of it, the page only shows first 15. every time I scan a new one and add it to the database, I see a new kit appearing in the page. It will help a lot if we can see the complete list and be able to pick several ones in one go (for example if you do not have them all in the same room)..... please correct the page to show them all. maybe a limit of 3000 or something, like when you see your stash, etc. that will not be a problem for most of us 😉 . if the query in the database makes that page slow, and you want to keep it fast for those that only want to add new kits, materials, tools etc, then show the 15 it does now, and add a button to show the rest for those who need it.
13 October, 22:38
Spanjaard
checked again, and it only shows 15 kits. if you add the instructions for one of them, a new kit appears in the list.
checked again, and it only shows 15 kits. if you add the instructions for one of them, a new kit appears in the list.
13 October, 22:45
Spanjaard
i would also suggest to add the filter of "location", which would help us getting several kits in one go. I know I have not yet recorded that in my kits, but since that filter is not available anywhere in the site, i never started adding it
i would also suggest to add the filter of "location", which would help us getting several kits in one go. I know I have not yet recorded that in my kits, but since that filter is not available anywhere in the site, i never started adding it
13 October, 23:01
/cs/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=cs
35
35
/cs/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo