Novinky
Stéphane Jayetpřidal nové fotoalbum.
40 14 July, 16:30
Stéphane JayetPromising kit replacing glue by screw in many cases, but there are some moulding issue, so parts have to be well prepared.
16 July, 11:27
Stéphane Jayet@george, during my vacations for 2 weeks I installed some books on it and it is now almost ok
10 August, 14:59
bossy122How will you do the black pinstripe? That is what has always kept me from trying this kit.
12 October, 06:42
Stéphane Jayet@George, I like this engine as well, and I don't remind a kit where the belts are really belt (not plastic formed with the pulleys).
12 October, 11:48
Stéphane Jayet@bossy122, frankly speaking, I don't know yet. 2 options on the table : option 1 is to cut the decals from the box, option 2 is to do some masking (using tracing paper on the original decals). Option 2 is my preferred option so far.
I already painted the body twice because I had some issues with the masking tape (removing the paint), so hope it will work at first try....
12 October, 11:53
bossy122Can you copy the kits pinstripe then print your own? A little white on one side and a little yellow on the other, covering up any tapes leaks as well.
13 October, 03:03
Stéphane JayetHello, I made a kind of combination. Since I was afraid not to get the same yellow colour, I printed the pinstripe on white decal paper, when cutting it I let a small part of the white to have it clean. The difficult part was to have no white on the other side. I had to cut and redo couple of times.
Unfortunately, I realised later that I should have done differently as it was very difficult /impossible to have the large black part parallel to the pinstripe....
22 October, 09:03
bossy122Shunko made decals for the Tamiya kit, but of course, they're no where to be found.
22 October, 18:34
Armory 1:72
SRWvlastní tuto položku
Pigs, Missiles and the CIA Volume 1: From Havana to Miami to Washington, 1959-1961
Latin America@War No. 25
Linda Rios Bromley
2021 10 November, 09:48
bughunterpřidal nové fotoalbum.
28 obrázky
WIP of a blue-yellow biplane
1:48
The seat belts (see pic 4) are done and added to the seats.
Projekt: Stearman PT-17 Kaydet
32 31 October, 18:27
bughunterWelcome Robert! Which one you want to take, the yellow or a green one? 😉
Please do not miss the project description, for the _VERY_ important reason for this project!
31 October, 18:55
Ludvík KružíkI'll sit down too. If I'm not mistaken, one green seat is still open. 😉
31 October, 22:40
bughunterHello my friends! A warm welcome to each and every one of you!
Working on the parts of this kit can be considered bodily harm! The bright yellow hurts your eyes and you can't see any details or damaged areas that need work. I would have preferred a more common gray!
1 November, 16:49
KennethHallo Frank, the set with lap belts only could be intended for the US Navy variant of the Stearman, the N2S. Until US entry in WW2, US Navy aircraft mostly did not have shoulder belts. I read this in a review of a 1/32 Vought Kingfisher while looking for seatbelts and wondering about the same thing for my 1/32 Revell/ICM N2S Stearman kit.
2 November, 08:55
bughunterWelcome! Thanks Kenneth! That makes sense, as the kit offers also a yellow Navy plane with red stripes. Luckily my wife want it blue-yellow. All the pictures I found shows also shoulder belts, but that was mostly still flying machines and I guess the shoulder belts was added later.
I had already downloaded the ICM manual as an additional reference and looked at reviews because of an oddity on the upper wing. More on this later.
2 November, 16:24
bughunterBecause I was still in soldering mode after the seats, I immediately turned my attention to the tank on the upper wing. I like the look of the metal fuel tank now.
2 November, 19:49
Robert PodkońskiPerhaps you will find my photos useful for your build:
Hangar 10 | Album by podkon
2 November, 21:31
bughunterThe wing is yellow again, but now the look is better!
I used here MRP-142 Orange Yellow. If someone remembers my Piper: the yellow was "Dark Chrome Yellow" also from MRP. Even this one here called "Orange Yellow" it looks more yellow compared to the Piper.
3 November, 18:47
Alec KI was just wondering where the heck is Bughunter, and here he is! Lovely progress and topic, following of course 👍
4 November, 03:57
bughunterWelcome Ben and Alec!
The lower wing is now also painted yellow. I only not sure about the blue. I want to go with the darker later blue, tried AK Pure Blue, but I will also try others.
4 November, 11:52
Jakub FialaNice work on this interesting type of aircraft so far 👍 Following for sure!
4 November, 14:33
Ben MLove these old trainers. They used to show up at airshows a lot when I was a kid.
4 November, 17:20
Christoph KunzUi, da habe ich den Start ja irgendwie verpennt. 🙁
Aber jetzt bin ich dabei.
4 November, 19:47
KennethNoch was, je nach dem, was das Vorbild ist: Part 71 in Point 4 of the instructions is in my opinion not correct for a WW2-era Stearman. Such a box typically houses a radio, intercom, transponder etc. on modern, restored examples
5 November, 07:12
bughunterIn the spirit of "Piano man": the regular crowd shuffled in ...
Welcome!
Oh, can someone wake up Kyle? 😉
5 November, 12:33
Juergen KlinglhuberKyle! - come on, you will miss a good portion of the show and have to put the stool again in the back... 😉 Just kidding. It is never to late for a bughunter-show
5 November, 17:26
bughunterKenneth, thanks for the hint! Interestingly the Eduard manual of the PE set here on SM told me to remove the mount points for this part 71. After that hint I checked some pictures of original machines and found the modern equipment. So thanks for the confirmation! After my PE set arrived I found out the remove of that mount points is missing in my paper version! Luckily I have checked the corrected online version first.
I would like to build a original equipped plane, but this is somehow limited. I have only the kit decals for a US Army plane "136" dated 1941. There is no serial number mentioned. I have not found photos of that plane yet. So I will build it according the information I have, with "educated guesses" on some points. Later more.
5 November, 19:27
bughunterI made the instrument panels. May be you know the Eduard sandwich method of multiple PE parts? Here we have a special thing!
5 November, 20:07
KennethFuselage innner side colours are also totally wrong in the instructions (overall aluminium). See flugzeugforum.de/thr...103126/post-3062086 where I posted some thoughts about this.
The „thick" plate on the instrument panel which you chose is correct for the period, it's a padding saving an unfortunate student pilot's face when smashing it against the instrument panel…
5 November, 20:40
bughunterKenneth, thank you very much for your great support 👍 Highly appreciated!
Now I understand, why the bolts of the instruments are hidden by this padding.
According to your picture I painted the fuselage halves bright linen and added the read brown tensioning varnish. It will not be very visible after closing the halves.
The inner structure is not in scale: much too thick! As it will be not very visible later I do not go the extra mile to replace the structure by brass wires!
Did someone say Jehovah? 😎
8 November, 19:09
bughunterThe seat belts (what a fiddly job), the seats and the cockpit as a whole are finished. What beautiful interior!
Have I forgotten something, or can the fuselage halves be glued?
9 November, 19:02
KennethLooks perfect 👍 I was wondering whether there shouldn't be a fuel cock (the red lever on the lower left side in the front cockpit) in the rear cockpit as well, but found quite a few photos were this indeed not the case (but also some with one).
And while the ICM fuselage structure is indeed very delicate, it stops short of the rear cockpit!
10 November, 09:45
Jules Byevlastní tuto položku
Quantum Orange AC-501X Compressor
Sparmax
C-AC-501X-QUO 10 November, 09:41
/cs/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=cs
35
35
/cs/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo