Novinky

Scott
Very nicely done! Excellent weathering and painting.

Rui S
I agree 👍

Mr James
Scott says it all

Gary Curling
Great model and weathering

Kyle DeHart
Forgot to start a build log on this one. It is a really excellent kit. My chassis pan was warped a little bit but I think I got it rolled back straight enough it'll be fine. Other than that the details are really nice and the engineering is excellent.

Building the gold 3rd place car prepped by Holman and Moody for Dick Hutcherson and Ronnie Bucknum. They were several laps down at the end but lined up with the cars of Miles and McLaren for the iconic 1-2-3 photo. I've always loved how the gold car looks.

George Williams
Nice work.

Kyle DeHart
Thank you George! It's coming along.

Kyle DeHart
And this one is complete! I greatly enjoyed this kit. Great modern tooling And it was a joy to build.

Guy Rump
Lovely build! 👍

Neuling
Indeed. Very good choice and application of color!

bughunter
What a coincidence! Last night I watched the movie (I don't know much about the history of sports cars) and today I find your model here. Very nicely done!

Marcel
Great work as usual. This kit is a bit expensive, the Fujimi version for example is cheaper. But do you think it's worth it based on your experience?

Kyle DeHart
Thank you Guy and Neuling. Much appreciated.

Frank, thank you!! I don't know a ton about the history of sports car racing but the 1,2,3 finish at Le Mans in 1966 is definitely an iconic moment!! I really have always loved GT40s too. Such cool machines, especially for the time. Most impressive.

Marcel, I haven't built the Fujimi kit so I don't have a direct comparison. I will tell you that this is top notch modern tooling and engineering. And one other positive this kit definitely has over the Fujimi is the full engine detail. The Fujimi lacks that. This one also comes with a nice photoetch rear grill, seat belt hardware and seat belt material. To me it was worth the money but I can't speak for everyone. And I've seen some really beautiful builds of the Fujimi.

Marcel
Thanks for the info, Kyle! A complete engine is definitely a big plus. After I've reduced my stash a bit, I will certainly consider picking up one of these. 🙂

Bozzer
Nice job, brother!
I took have a GT40. Unbeknown to me, it was a rare kit? It's the Revell version (in my stash) but it's actually a Fujimi rebox. Again, it's got the PE and I made seatbelts for it. I painted it in the only blue that I had, at the time, then discovered the history of the original car. That in itself, was worth trying to get the colour right! If you boys check out the history, the story is unbelievable! I'll get around to finishing the shell, at some point, and share it with you guys.

Michael Kohl
In my stash too. Will go for the blue one. Still pondering how best to paint all the metal knobs at the seat. Any suggestion?
Very nice build of your. Makes me wanna start mine right away.

Kyle DeHart
No problem at all Marcel!

Bozzer thank you!! Any GT40 is cool and several have awesome stories behind them too. Did you do the '66 "winner"? That took second place that year?

Thanks MIchael. The blue car is the most iconic and it is a great looking car. For my buttons I used a metallic gel pen. Then I went back and touched up as necessary. By the time I got to the second seat I pretty much had it down where I could just touch the button and get a dot in the right spot. First seat was a beat messier but not awful. I should've taken a better picture of the interior once I had the seats looking better.

Michael Kohl
Thanks Kyle. That sounds like a feasible idea. I was considering using a piece of metal or a toothpick of the right diameter as a kind of a stamp. Will try both. Probably it will come down to practice with any technique.

Bozzer
@Kyle.
That one mate. I read an eyewitness account of the race. I'll try and find it again, for you boys.

Kyle DeHart
No problem Michael!! A little practice for sure. Like I said, the second seat went way better than the first. But I was happy with both at the end.

Bozzer, I really like that box art. Very cool. That would be the car that officially won but really shouldn't have. Driven by none other than Bruce McLaren

Jv
Congratulations on another butiful bild kyle
I have the fujimi kit
And the revell kit
Missed out on the meng kit
Sold out everywhere now
I hear the 1/24 kit is better then it's bigger brother
I did manage to get 2 1/12 meng kits
And also 2 of the 1/12 magnifier kits
The history behind the gt 40 is so cool
First win by Ford over farrari
It was called 40 because it it 40 inches to the top of the ruff
The bobble in the ruff was necessary to fit the driver in the car

Guy Rump
The next project will be this old tool Italeri Horsa glider. My first glider, so here's hoping it will be a good experience. 🙂

Robert Podkoński
Taking a seat here!

Nicolas
I'm going to build this one too. Im watching with great interest.

J35J
I'm in!🙂

Guy Rump
Made a start today. First thing to do was decide if a MK.1 or Mk.2 was to be built. I've decided on the Mk.1 so I had to cut out the parts as shown in the photo. 🙂

Welcome along Robert, Nicolas & J35J, nice to have you with me. 👍

Many thanks mates for your interest and likes Robert P, Neil, Chris & J35J. 👍

Finn
Following

Guy Rump
Seats and flooring now installed inside fuselage. 🙂

Welcome along for the ride Finn. 👍

Many thanks for your interest and like Franck D. 👍

Guy Rump
Today I finally completed the cockpit and fitted the cargo door into the fuselage. 🙂

Many thanks mates for your interest and likes Rui, Tim v D, Duster_d & Sukhoi 242. 👍

Guy Rump
Cockpit, fuselage & tailplane now altogether. Tail was difficult to get together, Added 5g of weight to the nose and 15g of weight to the front of the fuselage. 🙂

Many thanks mate for your interest and like Andrew B. 👍

Guy Rump
Wings now together. I intend painting the wings before attaching to the fuselage. Hurricane added to show the size of the glider. 🙂

Many thanks mates for your interest and likes Alberto M & airjuneau. 👍

Guy Rump
Underside of wing painted with Vallejo Model Air black & insignia white. 🙂

Guy Rump
Did the upperside of the wings with Vallejo Model Air Dark Earth and Dark Green. Invasion stripes to be added next. 🙂

Many thanks mate for your interest and like Pietro DA. 👍

Neil Patrick
I built this about 20 years ago Guy as a gift for a WW2 Horsa pilot who was a friend of my wife's family. He'd flown Horsas into Normandy and Arnhem. He loved the model and it sat in his living room for the rest of his days. It's a nice kit as I recall.

Guy Rump
Invasion stripes are now on the wings. Next is to start painting the invasion stripes on the fuselage. 🙂

@ Neil, it is quite a nice kit considering its age. The fact that you gifted a Horsa model to an actual Horsa pilot veteran is something that must have been hugely gratifying. 👍

Many thanks mates for your interest and likes Villiers DV, Sebastien C, Neil P & 2 other mates. 👍

Guy Rump
Fuselage painted Dark Earth, BS Dark Green and black including invasion stripes. Gap is for where the wings are added. 🙂

Many thanks mate for your interest and like Chris. 👍

Guy Rump
Wings attached, decals & undercarriage added. 🙂

Many thanks mate for your interest and like Dom S. 👍

Guy Rump
Finally completed, my first glider done. 🙂

Many thanks mates for your interest and likes William J, Mirko R, Cliff K & Finn. 👍

Nicolas
Nice result Guy. 👍

J35J
Great build and paintwork Guy! Congrats👍🏻

Guy Rump
Many thanks Nicolas & J35J for your kind comments, I really appreciate them! 👍

Many thanks mates for your interest and likes Treehugger, Nicolas, Gary V & Cuajete. 👍

Guy Rump
Many thanks mates for your interest and likes Dave & Lukasz G. 👍

Guy Rump
Hopefully, this should be quite a quick build. 🙂

Guy Rump
Another to add to my RAF post war collection. 🙂

Maciej Bellos
In!

John
Beautiful IP and cockpit overall. Great looking metallic finish as well. 👍 Alclads?

Huyghe Eddy
A-stand Ammo Mig...

David H
The new name for alclad … 🤣 great finish btw 👍🏻

Ray Loch
Excellent subject from a not so excellent kit, but then again I haven't attempted my Kittyhawk Jaguar yet. Will be watching this one..

Moaske
The Kittyhawk kit is indeed much better. Enjoy building that one. Also operation Granby scheme?
I'm gonna put mine on hold until these arrive: reskit-models.com/in..49&search=jaguar
The kit nozzles are downright unusable (they don't even fit properly! 😂)

Michael Kohl
Good kit? Bad kit? It's a Jag. I follow.