Novinky

Robert Podkoński
Awesome job!

John
Fantastic build and presentation Mark. 👍 I love the display base with the mottled/splinter colors of each aircraft too. I'm still sticking with Tamiya paints though... 😉

Mark Sherwood
Thanks John. I've got say even though I've just become a Fanboy of AKRC there's still a place in my heart for Tamiya Paints, they were a vast improvement over the Humbrol tinnies back in the mid to late seventies as where the kits over Airfix. 🤘🥸🤟

Mark Sherwood
Thanks for the like Nordmito. 🤟🥸🤘

John
I may give the AKRC a try. I'm just used to how the Tamiya paints behave, dilutions that work for my airbrush, etc. If I understand correctly, the AKRC paints are also acrylic lacquers like Tamiya and Mr. Hobby so they should work with the same thinners and such. They do have a good color range compared to Tamiya for sure.

Mark Sherwood
Yep. You're right John, lacquer based acrylics, as far as I can tell same formula different bottles. I did have some reservations about RLM02 1938 wether it was the right colour though. I used AK's thinners. I'd test on some plastic card with X-20 and Mr Hobby thinners to see how they behave, which I haven't done yet just ploughed on through with appropriate thinners to get the project over the line. Having said that I would still use Tamiya paints. I just got seduced by AK3G and like most affairs it did not work out well. On that note Atom and any new acrylic will be kicked into touch.🤣👍🥸🤘🥸🤟🤣

Mark Sherwood
Cheers zhsv. 🥸👍

Mark Sherwood
Thank you Kendrick, for the like. 🤟🥸🤘

Mark Sherwood
Ta Villers and everyone else who liked the build. 🤘🥸🤟

Vincent
Great display piece!!!

Roland Sachsenhofer
This project has been waiting long enough, now the time has come! The "shell", seen here, is quickly put together, the glued seams are still wet, so to speak. I plan to show the A90 in a proper dio - gliding just above the water!

Michael Kohl
One one those weird sovjet constructions. Will be fun to follow.

Roland Sachsenhofer
Oh yes, Weird and.... big. That must have been a massive vehicle!

Ben M
watching

Skyhiker
Neat

Roland Sachsenhofer
Feel very welcome! 🙂

Treehugger
I just remembered, I have this kit in my stash.
Are those windows on the side? Like on passenger jets?

Roland Sachsenhofer
If this was some kind of passenger aircraft, I would book a flight for sure. 🙂
I will drill the windows and fill them with Krystal Klear.

Raz1
No windows, apparently.

See en.wikipedia.org/wiki/A-90_Orlyonok

Dave Flitton
Watching!!

Roland Sachsenhofer
Thank you both for interest and comments! Well, I will think over with that windows.... Thank you for the link!

Skyhiker
Looks to me like there are windows in that Wikipedia photo.

Raz1
I stand corrected. I had originally not seen the windows. Thanks, Skyhiker.

Plenty of interior photos here: flickr.com/photos/la..597/with/45021731405

And the last surviving example (per Wikipedia) is here: museum-vmf.ru/

Even though the appropriate page won't load here, a photo displays in the top-of-page banner rotation.

Skyhiker
Wow, those interior shots are incredible.

Roland Sachsenhofer
I agree, what pictures! The question of the windows should now also be answered "from the inside" as well. Thanks for these excellent links, mates!

Roland Sachsenhofer
A few new pictures here too: the finished pre-shading has shown a few touch-up needs, but tomorrow I want to be able to apply the surface colour!

Michael Kohl
Probably too late, but that project would have been perfect to try a levitation display.
amazon.de/Magnetic-L..aps%2C127&sr=8-3

Roland Sachsenhofer
I think it's a really wonderful idea.... A few Star Wars themes are in the making, possibly here: I would also like to see a Tie-Fighter hovering over this base.

A nice encounter - magnets are actually being used in this project! Since I want to show the "Orlyonok" gliding over a water surface as well as standing still, I have prepared two versions of the props. In order to be able to change them stably, I attached magnets to the axis of rotation. The one on the engine was inserted through a hole from the outside. It sits on the tip of a toothpick, which has been inserted through the hole in the inside of the engine. The magnet now sits exactly in the centre of the engine diameter. The second magnet only had to be glued to the two ends of the propeller axles. Now, it works perfectly with a soft "click"! 🙂

Łukasz Gliński
Interesting project, will follow

Robert Podkoński
Following for sure. It is a great idea to use magnets.

Roland Sachsenhofer
Thank you mates for interest ans motivation!

Roland Sachsenhofer
The Oryonok still looks a bit 'artificial', but in principle shows its surface colours, which will hopefully breathe a little life into it, are the traces of use and wear that I will still apply. The windows on the fuselage will of course also be drilled out and filled with clear white glue.
At the same time, the water base is now being worked on. This time I'm using a light filler on a polystyrene base as a base for this, with Vallejo water gel on top.
The magnetically interchangeable ahrwerk and propeller have worked - which is great news of course!

Skyhiker
That's moving along fast.

Roland Sachsenhofer
Thank you mate!

Roland Sachsenhofer
A few pictures of the water base in the making: I'm using a new material to build up the water surface. This so-called 'light filler' dries within 24 hours and is easy to shape with the appropriate tools - here with a simple brush

Robert Podkoński
Just a suggestion, Roland - an ekranoplan flying above the sea 'irons out' the waves under its wings in a characteristic manner:
oldmachinepress.com/..rlyonok-ekranoplans/

Roland Sachsenhofer
Robert, thank you for that important hint, I wasn't aware of this!

Roland Sachsenhofer
....and thank you for the excellent link as well!

Robert Podkoński
I am just happy to be of any assistance to you, Roland 🙂

Roland Sachsenhofer
Robert, your hint made me to rethink and rebuild the whole thing a bit: the strip of water flown over is no longer deeply furrowed, but has been flattened - the picture material helped a lot.
You can see the whole thing now primed with Tamiya acrylic paint and coloured once, tomorrow transparent water gel from AK will be applied...

Guy Rump
Looking good, following. 👍

Roland Sachsenhofer
Appreciated! 🙂

Robert Podkoński
Water looks already like on these photos, Roland. I cannot wait to see the plane levitating above the waves...

Roland Sachsenhofer
That´s motivating! 🙂

gorby
The water effect is very convincing!

Neuling
Yes

Roland Sachsenhofer
Thank you mates! Very appreciated!

Roland Sachsenhofer
Before I continue with pictures of the water base that was completed today, I'll show you a few snapshots of the completed 'Orlyonok'. As you know, I made it with interchangeable modules for both a land and a flying display; here you can see the 'land version'.
Tomorrow there will certainly be an opportunity to catch the aircraft flying by and photograph it in flight. 🙂

Skyhiker
Looks fantastic!

Ben M
very realistic. the weathering and the land diorama came out perfectly. can't wait to see it on the water!

gorby
I didn't know it had an undercarriage. The photos make it look like a very impressive beast.

Robert Podkoński
Fantastic job, Roland! (@gorby - it should be rather caller a beaching gear, imho, as it was used only to maneuvre on terra firma).