RC-Modellers
![Album image #1 Album image #1](/albums/img/7/7/6/1589776-25743-48-720.jpg)
Project inventory
![Album image #2 Album image #2](/albums/img/7/7/7/1589777-25743-19-720.jpg)
I will need 2 Walrus planes. The Trumper kit includes 6 planes, etchparts are just for 4.
![Album image #3 Album image #3](/albums/img/7/7/5/1589775-25743-15-720.jpg)
modifying the upper wing
![Album image #4 Album image #4](/albums/img/7/7/8/1589778-25743-89-720.jpg)
Glued the first parts. I don't like how the engine nacelle is mounted, nothing to do with the real plane, but it's the model of a modell, so I can live with it.
![Album image #5 Album image #5](/albums/img/1/4/4/1595144-25743-73-720.jpg)
Construction continues, the first PE parts have been installed.
![Album image #6 Album image #6](/albums/img/1/4/2/1595142-25743-20-720.jpg)
Some parts are just manageable.
![Album image #7 Album image #7](/albums/img/1/4/1/1595141-25743-90-720.png)
Short sketch of the diorama...
![Album image #8 Album image #8](/albums/img/1/4/5/1595145-25743-36-720.jpg)
...and a first placement test. Most figures fall over if they are not attached.
![Album image #9 Album image #9](/albums/img/2/1/7/1600217-25743-91-720.jpg)
Some styrofoam is glued to the frame as ground...
![Album image #10 Album image #10](/albums/img/2/1/6/1600216-25743-57-720.jpg)
...and some putty for wood is used to seal the foam, small gaps to the frame and get the textures smoother.
![Album image #11 Album image #11](/albums/img/2/1/5/1600215-25743-62-720.jpg)
Work on the planes continued.
![Album image #12 Album image #12](/albums/img/2/1/8/1600218-25743-22-720.jpg)
Because of the size of the parts I can't do more than 40 minutes in 1 go.
![Album image #13 Album image #13](/albums/img/2/1/9/1600219-25743-57-720.jpg)
Compairing with a 1 Cent coin.
![Album image #14 Album image #14](/albums/img/9/7/9/1600979-25743-67-720.jpg)
The filler was coarsely sanded (80 grit) to remove isolated peaks, a slight depression in the area of the planned runway was filled again, the agricultural/cycle path was glued on using sandpaper and the bottom of the lake was covered with bird sand and glue.
![Album image #15 Album image #15](/albums/img/9/7/8/1600978-25743-42-720.jpg)
The figures come already painted, typical of H0 railway models. Unfortunately, they are neither deburred nor have ejector- or sink marks filled.
![Album image #16 Album image #16](/albums/img/9/8/0/1600980-25743-41-720.jpg)
That's why I started by cleaning up the first set of figures and lightly filling it with surfacer in places.
![Album image #17 Album image #17](/albums/img/9/8/1/1600981-25743-67-720.jpg)
The boat is not deep enough in the water for its load, so I removed about 1.5 mm of material from the bottom.
![Album image #18 Album image #18](/albums/img/8/1/9/1604819-25743-13-720.jpg)
The surrounding area is prepared with colored structural paste from art supplies, the runway was engraved and painted gray.
![Album image #19 Album image #19](/albums/img/8/1/8/1604818-25743-16-720.jpg)
The runway was made of stone slabs. The plan is to have a very worn look, with some dirt in the depression as well as broken paving slabs and light grass growth around the edges.
![Album image #20 Album image #20](/albums/img/0/9/6/1606096-25743-35-720.jpg)
The planes are ready for paint. The MG is removed, I don't think it would be used at an RC-Model.
![Album image #21 Album image #21](/albums/img/0/9/8/1606098-25743-41-720.jpg)
The environment is customized with various oil paint washes. The higher areas are a little brighter, the deeper and wetter areas are a little darker and in the bank area also a little greenish to represent algae.
![Album image #22 Album image #22](/albums/img/0/9/7/1606097-25743-36-720.jpg)
The jetty is made from thin wooden profiles and aged with oil paint washes and...
![Album image #23 Album image #23](/albums/img/0/9/9/1606099-25743-36-720.jpg)
...glued into position.
![Album image #24 Album image #24](/albums/img/1/0/0/1606100-25743-14-720.jpg)
I started gluing in various aquatic plants from various Mosses.
![Album image #25 Album image #25](/albums/img/1/0/1/1606101-25743-25-720.jpg)
The area around the insertion point should be cleaned regularly, so there are significantly fewer and smaller plants here.
![Album image #26 Album image #26](/albums/img/1/0/2/1606102-25743-91-720.jpg)
There are also reed plants from eduard on the bank that are supposed to stand in the water. When the adhesive has hardened, resin can be poured in to represent water.
![Album image #27 Album image #27](/albums/img/8/8/9/1622889-25743-45-720.jpg)
Last weekend I poured the the lake water from resin. Unfortunately, I trusted the advice at the hardware store regarding the resin. The processing time, not the curing time, is 5 hours, the curing time is 2 weeks.
![Album image #28 Album image #28](/albums/img/8/8/8/1622888-25743-55-720.jpg)
Unfortunately, the diorama wasn't completely sealed either, so I had to put aluminum foil underneath to avoid a huge mess. When everything has hardened, resin residues must be removed from the bottom and sides so that the frame looks good again and the Dio no longer wobbles.
![Album image #29 Album image #29](/albums/img/0/9/1/1651091-25743-23-720.jpg)
The Walrus with the gear down is sprayed red.
![Album image #30 Album image #30](/albums/img/0/9/2/1651092-25743-65-720.jpg)
Not sure if I require one more layer of paint.
![Album image #31 Album image #31](/albums/img/0/9/0/1651090-25743-66-720.jpg)
But the plane is so tiny I dont want to fill all the details.
![Album image #32 Album image #32](/albums/img/0/9/3/1651093-25743-66-720.jpg)
The gear up plane with the underside sprayed sky.
![Album image #33 Album image #33](/albums/img/0/9/4/1651094-25743-21-720.jpg)
The upper side recived olive
![Album image #34 Album image #34](/albums/img/0/9/5/1651095-25743-66-720.jpg)
and a camo patern in extra dark sea grey by brush.
![Album image #35 Album image #35](/albums/img/0/9/6/1651096-25743-66-720.jpg)
It was dificult to reach the top side of the floats.
![Album image #36 Album image #36](/albums/img/0/9/7/1651097-25743-81-720.jpg)
Next: paint touch ups and detail painting.
![Album image #37 Album image #37](/albums/img/8/1/8/1654818-25743-75-720.jpg)
Due to the problems with the resin not hardening, I started again with the base plate. The rear plate is glued into the picture frame again with PVA glue.
![Album image #38 Album image #38](/albums/img/8/1/7/1654817-25743-83-720.jpg)
The adhesive residue on the back has been sanded off again. This time I also sealed all the joints with 2 thick layers of PVA glue. Hopefully it will be tight this time.
![Album image #39 Album image #39](/albums/img/8/1/9/1654819-25743-99-720.jpg)
The styrofoam plate is also glued in again, the lake will be a little smaller this time.
![Album image #40 Album image #40](/albums/img/8/2/0/1654820-25743-31-720.jpg)
Everything is filled with colored acrylic paste from the artist's supplies. I was able to detach the pier from the first attempt with the scalpel and transfer it to the new diorama.
![Album image #41 Album image #41](/albums/img/4/3/6/1655436-25743-46-720.jpg)
This time I cut out the concrete tiles for the runway from plastic sheet (8X8 mm), ...
![Album image #42 Album image #42](/albums/img/4/3/8/1655438-25743-74-720.jpg)
...glued them to a piece of wood and sprayed the edges with cement gray (H455). This leaves the center of the tiles a little lighter which is the first aging.
![Album image #43 Album image #43](/albums/img/4/3/9/1655439-25743-32-720.jpg)
I made the service road out of sandpaper again, which I cut to size. Together with the tiles, it was sprayed cloudy and glued on after drying.
![Album image #44 Album image #44](/albums/img/4/3/7/1655437-25743-80-720.jpg)
I sprinkled the bottom of the lake and parts of the shore with bird sand and fixed it with diluted PVA glue (still wet in the photo).
![Album image #45 Album image #45](/albums/img/2/6/4/1661264-25743-88-720.jpg)
Smal parts like engine, propeller and wheels are painted. I#m not sure how to paint the windows as they are smaler than 1 mm and not well separated..
![Album image #46 Album image #46](/albums/img/2/6/5/1661265-25743-86-720.jpg)
This one also waits for Decals
![Album image #47 Album image #47](/albums/img/2/6/6/1661266-25743-93-720.jpg)
The path is worked into the terrain.
![Album image #48 Album image #48](/albums/img/2/6/7/1661267-25743-48-720.jpg)
I glued in the tiles for the runway with Beli-Zell, an adhesive that foams up slightly as it dries, giving the tiles a slightly irregular height.
![Album image #49 Album image #49](/albums/img/2/6/8/1661268-25743-70-720.jpg)
In the meantime, I had to produce a few more tiles because I didn't have enough.
![Album image #50 Album image #50](/albums/img/2/6/9/1661269-25743-13-720.jpg)
I filled the transition to the tiles again with acrylic paste and filled some places where the foam or the gap between the foam boards was visible.
![Album image #51 Album image #51](/albums/img/2/7/0/1661270-25743-48-720.jpg)
Comparison of the panel height before...
![Album image #52 Album image #52](/albums/img/2/7/1/1661271-25743-13-720.jpg)
...and after adjusting the height.
![Album image #53 Album image #53](/albums/img/0/7/0/1663070-25743-73-720.jpg)
Light brown washes are applied to the slightly higher areas, while darker brown and green-brown tones are applied to lower-lying areas and in the lakeside area. I have also started grouting the runway.
![Album image #54 Album image #54](/albums/img/0/6/9/1663069-25743-35-720.jpg)
To do this, the glue residue that had filled the joint was first removed, filled with fine bird sand (brushed in with a brush) and fixed with diluted PVA glue. When this layer had dried, the entire runway was coated with diluted PVA glue and sprinkled with bird sand. After this layer had also dried, the excess sand could be removed with the help of an old stiff brush and a small spatula, so that it can only be found in the areas where it naturally accumulates (sunken pieces of the tiles).
![Album image #55 Album image #55](/albums/img/0/4/3/1666043-25743-52-720.jpg)
Water Plants from moss.
![Album image #56 Album image #56](/albums/img/0/4/2/1666042-25743-89-720.jpg)
more waterplants fron a different kind of moss.
![Album image #57 Album image #57](/albums/img/0/4/4/1666044-25743-60-720.jpg)
The reeds from Heki are too high. So I cut away the lower third. Otherwise it looks nice and is the cheepest of the 4 reeds I got.
![Album image #58 Album image #58](/albums/img/0/4/5/1666045-25743-82-720.jpg)
The first reeds in the Diorama. I used Heki, Faller and one plant from eduard (by far the most expensive) I got from the first try.
![Album image #59 Album image #59](/albums/img/8/7/8/1666878-25743-11-720.jpg)
I installed more reeds in and near the water.
![Album image #60 Album image #60](/albums/img/8/7/9/1666879-25743-53-720.jpg)
While the glue dried I added the first layer of static gras.
![Album image #61 Album image #61](/albums/img/8/8/0/1666880-25743-45-720.jpg)
When that was dry I removed the loose gras with a soft and wide brush.
![Album image #62 Album image #62](/albums/img/8/8/1/1666881-25743-63-720.jpg)
Some work on the runway: I added some darker spots on the tiles and used this to paint the small dots where I accidently removed the paint or spillt a bit of glue.
![Album image #63 Album image #63](/albums/img/8/8/2/1666882-25743-48-720.jpg)
The second layer of static gras (Faller 2 mm) applied...
![Album image #64 Album image #64](/albums/img/8/8/3/1666883-25743-92-720.jpg)
and the loose gras removed.
![Album image #65 Album image #65](/albums/img/8/8/4/1666884-25743-52-720.jpg)
If you use one type of static grass after another, you can collect the excess on a piece of paper and pour it back into the bag. The size comparison shows that this is worthwhile even with the relatively small area I have.
![Album image #66 Album image #66](/albums/img/5/2/5/1668525-25743-60-720.jpg)
The resin is hard this time.
![Album image #67 Album image #67](/albums/img/5/2/6/1668526-25743-70-720.jpg)
But there was an internal leak again.
![Album image #68 Album image #68](/albums/img/5/2/4/1668524-25743-93-720.jpg)
The water level dropt the distance btween the red lines.
![Album image #69 Album image #69](/albums/img/9/0/0/1670900-25743-49-720.jpg)
Today I build the fence from needles and mosquito screen and painted it green.
![Album image #70 Album image #70](/albums/img/9/0/1/1670901-25743-52-720.jpg)
The fence is installed.
![Album image #71 Album image #71](/albums/img/9/0/2/1670902-25743-50-720.jpg)
In the gaps between the tiles now some gras is growing.
![Album image #72 Album image #72](/albums/img/9/0/3/1670903-25743-57-720.jpg)
In the reed-area most of the low vegetation, made from dried moss from the local woods, is installed. Setting the reeds takes some time for drying. If one trys to install to many plants at once, one will flip nearby reeds.
![Album image #73 Album image #73](/albums/img/9/0/4/1670904-25743-97-720.jpg)
I removed the tape on the frame. The Photo was taken wile looking for the exact position of the pair in the reeds.
![Album image #74 Album image #74](/albums/img/8/5/3/1671853-25743-93-720.jpg)
I also spent about 2 more hours "planting" reeds.
![Album image #75 Album image #75](/albums/img/8/5/5/1671855-25743-48-720.jpg)
The meadows next to the airfield and the area around the fence, which would be difficult to mow with a lawnmower, have received the first layer of longer grass (6mm).
![Album image #76 Album image #76](/albums/img/8/5/4/1671854-25743-65-720.jpg)
From the waterside it looks quite good already.
![Album image #77 Album image #77](/albums/img/1/0/9/1682109-25743-33-720.jpg)
I added another colored grass to the meadow
![Album image #78 Album image #78](/albums/img/1/0/8/1682108-25743-25-720.jpg)
I started buildingthe towel from a papier napkin.
![Album image #79 Album image #79](/albums/img/1/0/7/1682107-25743-40-720.jpg)
The first flowers are on the dio.
![Album image #80 Album image #80](/albums/img/0/2/0/1687020-25743-42-720.jpg)
The kit decals are applied
![Album image #81 Album image #81](/albums/img/0/2/1/1687021-25743-95-720.jpg)
2 small trees and some bushes are completed
![Album image #82 Album image #82](/albums/img/0/2/2/1687022-25743-14-720.jpg)
I started working on the bent reeds.
![Album image #83 Album image #83](/albums/img/8/6/1/1694861-25743-59-720.jpg)
In the last few days I made some progress with the figures.
![Album image #84 Album image #84](/albums/img/8/5/9/1694859-25743-54-720.jpg)
the crew of the boat
![Album image #85 Album image #85](/albums/img/8/6/0/1694860-25743-14-720.jpg)
the crew of the boat
![Album image #86 Album image #86](/albums/img/8/6/2/1694862-25743-20-720.jpg)
the crew of the boat
I'm not sure if the dress works like I hoped. Instead of flowers it reminds me of a clown.
I'm not sure if the dress works like I hoped. Instead of flowers it reminds me of a clown.
![Album image #87 Album image #87](/albums/img/8/6/4/1694864-25743-77-720.jpg)
Skateborder
![Album image #88 Album image #88](/albums/img/8/6/3/1694863-25743-36-pristine.jpg)
Skateborder
![Album image #89 Album image #89](/albums/img/8/6/5/1694865-25743-63-720.jpg)
Skater
![Album image #90 Album image #90](/albums/img/8/6/6/1694866-25743-95-720.jpg)
Girl playing with dogs
![Album image #91 Album image #91](/albums/img/8/6/7/1694867-25743-23-720.jpg)
Boy playing with dogs
![Album image #92 Album image #92](/albums/img/8/6/8/1694868-25743-55-720.jpg)
Dog 1
![Album image #93 Album image #93](/albums/img/8/6/9/1694869-25743-31-720.jpg)
Dog 1
![Album image #94 Album image #94](/albums/img/8/7/0/1694870-25743-34-720.jpg)
Dog 2
![Album image #95 Album image #95](/albums/img/8/7/1/1694871-25743-57-720.jpg)
Dog 3
![Album image #96 Album image #96](/albums/img/8/7/2/1694872-25743-48-720.jpg)
Guy with glider model. I do't think the colours fit.
![Album image #97 Album image #97](/albums/img/8/7/3/1694873-25743-34-720.jpg)
Guy with glider model
![Album image #98 Album image #98](/albums/img/8/7/4/1694874-25743-13-720.jpg)
Guy searching for his plane
![Album image #99 Album image #99](/albums/img/8/7/5/1694875-25743-70-pristine.jpg)
Boy with remote control
![Album image #100 Album image #100](/albums/img/8/7/6/1694876-25743-46-720.jpg)
Guy stearing the ship model
![Album image #101 Album image #101](/albums/img/8/7/7/1694877-25743-20-720.jpg)
Guy collects his wrackage after crash landing
![Album image #102 Album image #102](/albums/img/8/7/8/1694878-25743-85-720.jpg)
the guy in the reeds
![Album image #103 Album image #103](/albums/img/8/7/9/1694879-25743-30-720.jpg)
the girl in the reeds
![Album image #104 Album image #104](/albums/img/8/8/0/1694880-25743-28-720.jpg)
the girl in the reeds
![Album image #105 Album image #105](/albums/img/4/5/8/1712458-25743-20-720.jpg)
I realized that I had forgotten the couple's clothes. So I roughly cut them out of printer paper, crumpled them up, unfolded them, painted them and glued them onto the diorama.
![Album image #106 Album image #106](/albums/img/4/5/7/1712457-25743-72-720.jpg)
In addition to further reeds, the first 5 figures are also glued on.
![Album image #107 Album image #107](/albums/img/4/5/6/1712456-25743-68-720.jpg)
The water has hopefully been finally treated. The layer should become clear again overnight. The boats and geese are placed directly on the wet water gel.
![Album image #108 Album image #108](/albums/img/8/0/5/1723805-25743-51-720.jpg)
The various parts are slowly but surely coming together. Since my printer isn't working as it should at the moment, I haven't started on the airplane windows yet.
![Album image #109 Album image #109](/albums/img/8/0/4/1723804-25743-94-720.jpg)
The various parts are slowly but surely coming together. Since my printer isn't working as it should at the moment, I haven't started on the airplane windows yet.
![Album image #110 Album image #110](/albums/img/8/0/6/1723806-25743-31-720.jpg)
The various parts are slowly but surely coming together. Since my printer isn't working as it should at the moment, I haven't started on the airplane windows yet.
![Album image #111 Album image #111](/albums/img/8/0/7/1723807-25743-96-720.jpg)
The various parts are slowly but surely coming together. Since my printer isn't working as it should at the moment, I haven't started on the airplane windows yet.
![Album image #112 Album image #112](/albums/img/8/0/8/1723808-25743-29-720.jpg)
The various parts are slowly but surely coming together. Since my printer isn't working as it should at the moment, I haven't started on the airplane windows yet.
![Album image #113 Album image #113](/albums/img/8/0/9/1723809-25743-40-720.jpg)
The various parts are slowly but surely coming together. Since my printer isn't working as it should at the moment, I haven't started on the airplane windows yet.
![Album image #114 Album image #114](/albums/img/4/5/8/1750458-25743-16-720.jpg)
after a few unsucsessful tries with decals for the cocpit windows I tried today with paint. The result is not perfect, but I can live with it.
![Album image #115 Album image #115](/albums/img/4/5/9/1750459-25743-42-720.jpg)
While painting the Windows I broke of one float from the 2nd plane, witch ended with the carpet monster. So preparing a new float (I got parts for 4 spare planes and 2 spare PE sets)was nessesary. Thats the only reason this project isn't finished.
![Album image #116 Album image #116](/albums/img/4/6/0/1750460-25743-37-720.jpg)
In the last weeks I build mostly the smal stuf like the rc-controlers, toolboxes, the windsock.
![Album image #117 Album image #117](/albums/img/4/6/2/1750462-25743-20-720.jpg)
I also re-aranged some of the figures to get rid of the empty space where the runway meets the frame.
![Album image #118 Album image #118](/albums/img/4/6/3/1750463-25743-82-720.jpg)
On short final
![Album image #119 Album image #119](/albums/img/4/6/1/1750461-25743-36-720.jpg)
Just the second plane missing
![Album image #120 Album image #120](/albums/img/3/3/7/1753337-25743-59-720.jpg)
Finaly finished
![Album image #121 Album image #121](/albums/img/3/3/9/1753339-25743-29-720.jpg)
Finaly finished
![Album image #122 Album image #122](/albums/img/3/4/0/1753340-25743-22-720.jpg)
Finaly finished
![Album image #123 Album image #123](/albums/img/3/4/1/1753341-25743-30-720.jpg)
Finaly finished
![Album image #124 Album image #124](/albums/img/3/4/2/1753342-25743-13-720.jpg)
Finaly finished
![Album image #125 Album image #125](/albums/img/3/4/3/1753343-25743-15-720.jpg)
Finaly finished
![Album image #126 Album image #126](/albums/img/3/4/4/1753344-25743-75-720.jpg)
Finaly finished
![Album image #127 Album image #127](/albums/img/3/4/5/1753345-25743-54-720.jpg)
Finaly finished
Komentáře
46 5 November 2023, 15:30
![](/profiles/img/25743-467-s.jpg)
Thanks for watching. I'm not entirely sure what will happen myself, but it will be some kind of diorama with a RC-Airfield and a lake. The not sure part mostly relates to how deep the lake will be and whether I need an additional frame or can I get by with my usual picture frame.
7 November 2023, 19:42
![](/profiles/img/25743-467-s.jpg)
The planes are ready to paint, the lake is redy for the water, about half of the figures are cleand up, but that is a good job for afrer work when I usually get just about 15-30 minutes for modelling per day.
26 November 2023, 19:55
![](/profiles/img/25743-467-s.jpg)
A short update:
The diorama is currently at a standstill because I made a mistake when weighing the resin. The resin is still sticky, but is currently on the radiator to dry (not to cure). I hope that when the resin is halfway solid I can fix the problem with another layer.
20 January, 10:47
![](/profiles/img/46811-191-s.jpg)
I mean the project stash alone looks promising. I have to follow this. ...can't resist...
20 January, 11:04
![](/profiles/img/25743-467-s.jpg)
Due to the problems with the resin not hardening, I decided to start the base plate all over again. I bought a new picture frame today and have already glued the plywood panel in place. Of course I will try to salvage as many parts as possible from the first attempt, e.g. the bridge and the reed plants from Eduard.
30 January, 20:32
![](/profiles/img/125872-847-s.jpg)
Respekt!!! 👍 Viel zu klein für mich … glaub ich bleib bei 1/72 und größer 🤣
11 February, 18:37
![](/profiles/img/25743-467-s.jpg)
Thank you both very much. @Atomicdelirium: I Hope to get so far next weekend. Before that, a few washes need to be applied to make the ground more interesting and the aquatic plants need to be added. @Thomas: 1/72 ist mir eigentlich auch lieber, aber als ich die Figuren gesehen habe konnte ich nicht wiederstehen.
11 February, 19:04
![](/profiles/img/13641-502-s.jpg)
Regarding the Walrus' windows - decal stripes perhaps? Black or silver?
18 February, 19:42
![](/profiles/img/25743-467-s.jpg)
Hi Łukasz, thanks for the Idea. I will use an Instruction, scale it down and cut the decals from an "Balkenkreuz" decal from the sparesbox.
Today I tried again with the water. My diorama seems to be tight this time, although the water level has also dropped this time. Hopefully everything will be hard too. But I won't be able to say for a few days. There won't be any pictures until then, unfortunately the diorama can't be moved at the moment.
18 February, 20:01
![](/profiles/img/25743-467-s.jpg)
Thanks Jennifer. This Time it worked better. There is still some internal leakage, as the water level droped about 3 mm over night, but there is no resin on the outside. The resin-residue in the mixing container is after 26 h harder than the first try after 2 month. But with about 5 days cureing time I'm not totally sure yet.
19 February, 18:59
![](/profiles/img/25743-467-s.jpg)
I made good progress this weekend, but I discovered, that "planting" the reeds is suprisingly time consuming with about half of it done in nearly 5 hours.
25 February, 18:32
![](/profiles/img/25743-467-s.jpg)
Since I didn't get to build last weekend due to a hand injury and my visit to the exhibition, I made some progress on the diorama this weekend. Almost 3 hours of work on grass and reeds, as well as the first flowers and preparations for the first bushes / trees and the place for the couple in the reeds have taken place.
10 March, 20:07
![](/profiles/img/34360-107-s.jpg)
Get well soon. Looks good so far. I think the lake turned out great with the stuff floating in it.
10 March, 20:36
![](/profiles/img/25743-467-s.jpg)
Hi Shar, thank you. The lake isn't done. The floating stuff is there just by acident. I'm going to clean is, add some drifting wood in the reeds and a second layer of resin. Than the 2 boats and all the floating gras can be added and fixed with some water effects. I do it that way for two reasons:
1: I got the leak where resin went missing under the frame and the water level is not high enogh.
2: I hope the resin in the first layer has seald the gaps in the reeds, so the second layer will not "climb" due to the capillary effect.
11 March, 06:06
![](/profiles/img/25743-467-s.jpg)
Thanks for your interest and the likes.
Last week I worked at the figures, partly repainting with acrylics, and starting modifying everything with oils. Work still in progress. there are 2 figures I don't realy like so far, perhaps that will change after a matt coat.
28 March, 20:31
![](/profiles/img/25743-467-s.jpg)
Most of the parts ar together now. Having trouble with my Printer means the decals for the Windows of the plane are still missing. I also realized today that I forgot to build toolboxes, so I made up for that today.
Thanks for your likes and your interest.
5 May, 17:24
![](/profiles/img/25743-467-s.jpg)
I'm nearli done with this project. Oll that's missing now is the second Plane witch I managed to demage today. I got the spare perts, bit the paint isn't dry yet. I didn't manage tho get the cockpitwindows from Decals to my liking, so I used paint today. the result is not perfekt but I can life with it.
Thanks everyone for the likes.
16 June, 18:56
![](/profiles/img/13641-502-s.jpg)
Lovely dio of the Walrus fan-club 😄 Love all the sweet details, like the dogs 😄
22 June, 19:08
![](/profiles/img/44957-709-s.jpg)
Lovely work, utterly enjoyable to watch this progress until the grand finale - congrats! 👍 👍
22 June, 21:33
![](/profiles/img/46811-191-s.jpg)
Your dio is not only filled with life it is filled with several different stories. So wonderful! So much love for detail! I enjoyed the whole ride from the beginning. As I finally saw the last plane, I thought it would have been a funny twist if it would have been a camera drone over the reed. 😄
Great work, keep it going! 👍
23 June, 10:58
![](/profiles/img/25743-467-s.jpg)
Thanks you for your kind words. I realy like the Idea with the camera drone. Perhaps I use is with one of my future projects.
23 June, 11:34