Mil Mi 6
Komentáře
102 20 March, 17:28
Roland SachsenhoferThe double construction of Mil Mi-6 and Mi-22 opens with these pictures. Amodel's models have a very special charm: you are encouraged to participate and help shape them! Thick, lumpy parts, consistently all with fish skin and the need to be reworked - but also an inaccuracy of fit that is almost funny again. But this is the last time to complain! The kit is well designed and, if you turn a blind eye, it can be quite nice. I really appreciate Amodel kits by now, they are simply fun and pure shirt-sleeved modelling fun 🙂
20 March, 17:35
Живко ДжаковI want to see that too. I am only concerned about my A-model association - masochism.
20 March, 20:51
Roland SachsenhoferThank you for your motivation and interest! A little bit of masochism must really be involved here. I'll send you some new pictures soon to prove it.....
21 March, 18:35
Thomas KolbThis is going to be fun to watch! I love watching people scooping up crappy models and turning them into masterpieces. I am sure you will.
22 March, 07:39
Roland SachsenhoferI am delighted by your trust and motivation!
An Amodel fan indeed! The parts are all in a condition that sometimes makes it a little tedious and the accuracy of fit is not always, but sometimes a horror - please see the new pictures for both - but the whole thing makes perfect sense! Incidentally, it will be a very large model, so I will be trimming, filling and sanding the main section and the rear separately. Otherwise the handling would be a bit cumbersome.
23 March, 13:28
Alexander GrivonevRoland, your output is simply ridiculous. Are you doing anything else besides modeling? 😄
23 March, 14:24
Roland SachsenhoferWell, one or two things... 🙂 Thanks for the motivating astonishment 🙂
24 March, 13:12
Zbynek HonzikThat kit is a hell of a massacre! 😱 Fingers crossed Roland you have the strength and motivation to finish it! Although I have no doubt you'll get a beautiful model out of that kit. 👍😄
24 March, 15:19
Roland SachsenhoferFingers crossed and faith in a good ending are welcome here as always 🙂I'm very happy about your interest, mates!
Alexander: plenty of the former until the latter comes 🙂
24 March, 19:51
CuajeteYou have the courage to do 2 of these, but the end result will be fabulous, as always 😉
Well (hard) job so far, Roland! 👍
24 March, 19:53
Michael Kohl"I don't need good models! I am a good modeller!"
That's gonna be fun - to watch - from a safe distance. 😉
25 March, 20:41
TH SCALE MODELS (Thomas Haberl)Viel Glück .... das sieht ja grauenhaft aus (die Qualität der Teile ... ) das kann keinen Spaß machen, oder?
26 March, 14:25
Roland SachsenhoferThomas, sieht so aus, nicht wahr? 🙂 Aber ich muss sagen, wenn man sich mit dem Mehraufwand an Zeit und Energie zum Spachteln und Schleifen arrangiert hat, macht es durchaus Spaß. Die Bausätze haben Charm! (Aber einmal abwarten, wie ich in drei Wochen drüber schreibe...)
But I have to say, once you've come to terms with the extra time and energy required for filling and sanding, it's a lot of fun. The kits have charm! (But wait and we will see what I write about them in three weeks' time...)
27 March, 08:19
Juergen Klinglhuber👀 - watching of course.
Beeing used to consume putty in barrels it is always good to see I'm not alone - when others do meditation - we sand 😉 just making fun. The result will be great, I'm sure.
27 March, 08:42
Roland SachsenhoferYour words inspire and motivate me - I'm glad to have one or two projects running in parallel and not just be tied to the extensive sanding and filling that certainly takes its time. So I am happy to receive your feedback!
28 March, 07:32
Roland SachsenhoferA decisive step in the construction process: will the transparent parts fit and therefore be usable - or will some kind of replacement have to be considered? Well, the three pictures of the Mi-6/Mi-22 show that the result is not bad at all. The accuracy of fit was quite good! Uff!
28 March, 12:10
MariusMy usual questions would be how the kit goes along and how it fits. I actually laughed a bit at pictures 13 to 20. The challenges there are a bit beyond what I have personally done so far.
Good luck with the project!
28 March, 12:14
Roland SachsenhoferHello Marius, well, we'll see how I get on with it. So thank you for the encouragement!
29 March, 08:21
Kurt ReichertThe fit would definitely stop me from touching this kid. Respect Roland!
30 March, 08:48
Roland SachsenhoferBy the way, the election for this year's "my workbench Putty Queen 2024" has been decided and ended ex aequo: Miss Mi 6 and Miss Mi 22!
1 April, 14:42
Flop_SeLooks like an excellent fit! Kudos for your patience with it! I think you earn the black belt for master of putty! 😉
1 April, 16:23
Roland SachsenhoferThank you very much for all the enthusiasm here! 🙂 Yesterday, after I had finished sanding all the surfaces, I joined the fuselage and tail section together on Miss 6 - it went quite well. Before I have to stay away from the workshop for five days for work reasons, I'll upload a photo of it today. Thanks, mates!
2 April, 10:34
Roland SachsenhoferNow what belongs together has come together - I am pleased to be able to show you the "complete" fuselage of the Mi-6. What looks like areas that have not been filled well is the crystal clear superglue, combined with the remains of the filler.
2 April, 17:23
Roland SachsenhoferAnother little something has been added. I'll soon be doing some initial colour/preshading tests and then fitting or at least preparing the myriad of grab rails, aerials and other attachments.
13 April, 13:18
Roland SachsenhoferA strong pre-shading should ensure that the following "grey over everything" does not appear strangely monotonous. Some touch-ups are still due - a little colour on the plastic isn't a bad way to see this.
15 April, 06:47
CuajeteIt seems that the double effort was worth it. I guess now everything or almost everything will be easier. Nice preshading! 👍
15 April, 18:49
Roland SachsenhoferThanks for the encouragement, mate!
I'm really looking forward to seeing how the whole thing will look in a more uniform grey ! (I'll be using Gunze H 417)
16 April, 09:04
Michael KohlNothing to be seen anymore of the crude AModel base. Looking good. The exhausts caught my eyes and I mistook them for metal ones. Then I realised that they are the result of well done filling, sanding and coloring. Looking forward for more.
16 April, 10:59
bughunterHolla die Waldfee! What huge chunks!
And a big bonus point for your perseverance with this crude kit 👍 I would probably have thrown such parts away.
16 April, 11:52
Roland SachsenhoferThanks for the support, mates! The battle with the elements will probably leave a few marks, but I'm currently working hard to remove any new (now only minor) imperfections with a layer of filler. I also think you're right: the major work on the hull seems to have been completed. 🙂
17 April, 15:31
Roland SachsenhoferThe large fuselage is now beginning to show its actual shape and surface colour. Everything is still shiny from the sealing of the decals. This is followed by washing and subtle weathering before the undercarriage is fitted.
20 April, 13:08
Juergen KlinglhuberLooking good! Really looking forward to see this big birds finished. 👍
20 April, 13:10
Roland SachsenhoferThank you for your words Jürgen - I'm really looking forward to the result too!
20 April, 13:14
Erik LeijdensOw wow great progress Roland!! And what a beast of a helicopter but also a real beast of a kit! Great to see what you can make of this
20 April, 16:35
Roland SachsenhoferThank you for these motivating comments, mates-I will keep you up to date! 🙂
21 April, 07:22
Roland SachsenhoferNow it's almost done - all assemblies are finished, antennas mounted.... What's left to do now is to airbrush the areas where the CA glue is still shiny and all the areas that have been touched up with a brush. In addition, all the windows still need to be reworked. I have broken out some of them and replaced them with "Klearfix"; these are still drying and therefore look strange.
5 May, 18:19
Roland SachsenhoferAgain, a few new pictures show the completion of this second Mi-6 "Hook" project. In contrast to the Mi-22, a different set of etched parts was used here - which meant that the two antenna "antlers" on the nose had to be removed from the kit - including a few compromises in fineness and detail.
In general, however, the two projects are very similar; this giant was also a flying command post, albeit in a less elaborate form than the Mi-22 version that followed it. You'll excuse the similarity of the pictures - I tried to provide variety with a scenario of all "arid plateaus". : )
11 May, 18:23
BAT21The side antennas are mounted too far forward - on the right the antenna was behind the door, not on the door. Maybe that can still be corrected?
And while we're at the front door: there's still a mask that needs to be removed from the window. 😉
11 May, 19:05
Roland SachsenhoferThank you all very much! Thanks also for the suggestion about the incorrectly positioned aerials, BAT21 - you're absolutely right, I'm grateful for the tip and promise to put things right with the next "Hook". Your comments all make me happy and motivate me, thank you for all your interest!
12 May, 10:30
CuajeteFantastic job, Roland. A master class of encouragement against discouragement to face the hard work of facing such a complicated kit full of plastic lumps.
Very nice and realistic result. Congrats!
12 May, 18:27
Thomas KolbThis is an astonishing result. Seriously, I am still not sure if I am looking at a model or a photo of the real thing. Absolutely amazing!
13 May, 12:00
Michael KohlTop result from a heap of plastic. The last pictures are the cherries on the cake and are just pure joy to watch.
13 May, 16:11
Roland SachsenhoferReally, I am very happy about your reactions, mates! I am impressed and feel very motivated- thank you very much for your encouraging comments!
14 May, 06:31
Bernhard PetheIch will die Euphorie nicht dämpfen, aber mir ist aufgefallen, am Heckrotor sind zwei Fehler verbaut. Zum einem ist die Drehrichtung des Heckrotors falsch und die Rotorwelle ist viel zu lang. Vielleicht kann man das noch ändern? Ansonst, bei diesem Bausatz, eine schöne Fleißarbeit.
11 June, 14:24
Roland SachsenhoferHallo Bernhard, ich danke Dir als Kenner der Thematik für die wichtigen Hinweise. Nachdem ich auch noch zwei Mi-10 vorhabe, freue ich mich, jetzt besser informiert zu sein! Euphorie gefällt mir auch- danke für den wirklich hilfreichen Kommentar!
Hello Bernhard, as an expert on the subject, thank you for the important information. As I'm also planning two more Mi-10s, I'm pleased to be better informed now! I also like Euphoria - thanks for the really helpful comment!
11 June, 16:06
