modelářská databáze | správa kitníku
McCoy
Urban Gardini (McCoy)
SE

Nikki

Komentáře

30 December 2014, 12:40
Holger Kranich
Hey Urban, ya wanna know it, hu?
That looks awesome to me! But why not in your scale?😉
Damn this is an abolute complete set! 😄
30 December 2014, 13:17
Urban Gardini
It scares me but I eventually must leave the shallow water in the pool and learn to swim in deep water as well.
30 December 2014, 13:24
Urban Gardini
Plus, If I get rid of this beast there's gonna be more room for 1:72 kits...
30 December 2014, 13:25
Holger Kranich
I always like to build different scales, at first i was only into 1:72 but after my first big scale i was definately hooked!😉
30 December 2014, 13:51
Augie
Ooooo someone save me a seat I wanna watch 😄
30 December 2014, 19:52
Urban Gardini
For you Augie I reserve one of the VIP seats!
30 December 2014, 20:33
Augie
Thanks Urban 🙂 your too nice to me
30 December 2014, 23:47
Matthias Weiss
Looks like a hell lot of work!! This will be great...
31 December 2014, 02:35
Holger Kranich
I hope, i´ll get a VIP seat, too...😉
31 December 2014, 07:21
Acki
I'm in. Pass the beer and popcorn.
31 December 2014, 21:06
berni
Hi Urban, a Huge Enterprise. I wish you Lucky 🙂 👍
18 February 2015, 10:52
Urban Gardini
Thanks mate!
18 February 2015, 10:54
Alistair Brand
Watching with interest. Good luck!
18 February 2015, 22:50
Przemek Przybulewski
I will watch with interest. I'm planning to do the same and I'm wondering how parts will fit.
18 February 2015, 23:04
Urban Gardini
Thanks mates!
18 February 2015, 23:29
Holger Kranich
What a damn amount of additional work! But the result shall be rewarding!
And how does it feel to build such a big block of plastic?😉
19 February 2015, 08:32
Urban Gardini
It feels like a big block of plastic...
19 February 2015, 10:10
Igor Zdorovyak
grandiose project
19 February 2015, 11:02
Urban Gardini
I hope I'm gonna be able to finish this one before midsummer this year but everything is so big compared to what I'm used to.
19 February 2015, 11:29
Holger Kranich
You will need a lot of paint, compared to your recent builds😢
19 February 2015, 12:16
Urban Gardini
Oh yes! I've got four fresh Lifecolor bottles for this one...
19 February 2015, 12:23
Holger Kranich
Do you have a mask for sanding resin or do you do it like me and sand wet?
21 February 2015, 20:40
Urban Gardini
Yes and no! I've got a mask that I'm keeping forget to use. I try to use the saw as much as possible and use the vacuum cleaner frequently and when I sand I do it with slow strokes but I sand dry.
21 February 2015, 21:00
Holger Kranich
Yeah, safety first!😄
21 February 2015, 21:13
Urban Gardini
True! It's a new experience to tackle replacing resin parts. It's one thing just adding some resin stuff and a whole new world here with a lot of work to get it right and a lot of guessing. But the detail is stunning on the Aires resin.
21 February 2015, 21:18
Wim van der Luijt
Just looked at all of this resin madness....loving it all. I'm tuned in for the rest of the build!
24 February 2015, 07:03
Urban Gardini
Thanks mate! I believe that "resin madness" is indeed the correct term here. I hope that I won't let you down.
24 February 2015, 10:51
Urban Gardini
That gives one week of building at yet not one piece glued or painted so far on this build but I did manage to get some blood on the resin so it looks good for the future.
24 February 2015, 22:19
Augie
hey urban.. its not resin madness without some blood 🙂
24 February 2015, 22:29
Urban Gardini
True and it's as it should be...
24 February 2015, 22:34
Steve Wilson
...
"I ate his finger with some fava beans and a nice chianti"...
Sorry Urb, I couldn't resist it...(((😄 )))
24 February 2015, 22:42
Urban Gardini
No, I don't use my Dremel on the resin. GWS saw, exacto and beutyshop nailfiles is what I use on the resin.
25 February 2015, 00:38
Urban Gardini
That's ok Steve!
25 February 2015, 00:39
Acki
First blood! Get well soon!
25 February 2015, 06:21
Derek Thompson
What detail on those cans, drool, drool! Any photo etch involved in the project?
25 February 2015, 07:17
Steve Wilson
...
This happens to me when I cut my finger...
[img1]
 
25 February 2015, 08:04
Steve Wilson
...
Speaking of Razors have you tried using a Mini Razor saw with assorted blades???
25 February 2015, 08:10
Urban Gardini
That cut was healed to the next day, just a matter of letting it bleed a bit and then just wipe it off with the thumb on the same hand and keep going..

I've got a Dremel but I feel that I've got more control going by hand.

Not much PE involved in the build, just the fret that comes with the Aires cockpit.

I'm quite fond of the PE mini razor saws and use them quite a lot.
25 February 2015, 09:04
Urban Gardini
True that as there's no technique that is absolute for all modellers. For a new builder it's a bit trial and error in order to find out what techniques that works best.
25 February 2015, 09:40
Gareth Windsor
A little late Urban but I'm pulling up a chair and watching the rest of the show. Looking good so far. Will there be more blood?
17 July 2015, 14:58
Urban Gardini
Thanks mate! There could be more blood as there's a lot more work to do yet, especially as there's not been any work done on it since the last update. An eight year old promise got in the way plus I've had quite a lot of ache as well but I hope to be able to continue soon.
17 July 2015, 15:59
Kerry COX
Been there, DONE THAT. lol 🙂 But it's not modelling unless you can show some scars for your efforts. 🙂
8 June 2016, 19:23
Urban Gardini
Yeah mate, it's not a proper build without a proper blood offering to the modelling Gods...
8 June 2016, 22:35
Kerry COX
Totally agree. lol. 🙂 👍
8 June 2016, 22:53

Album info

My first ever venture into 1:32 and also the first time I deal with resin of this magnitude.

66 obrázky
1:32
Pozastaveno
1:32 Tornado GR. Mk1 RAF (Revell 04705)1:32 Panavia Tornado IDS (Aires 2130)1:32 Panavia Tornado Exhaust Nozzles (Aires 2124)6+

Všechna alba

Zobrazit všechna alba »