Chilean Hunter

1
July 19, 2015
First step was to remove the front fuselage
2
July 19, 2015
The original dorsal spine was removed too
3
July 19, 2015
Here what you have to remove before to fit the PJ resin parts
4
July 19, 2015
Dry fit to show the PJ resin parts for the conversion
5
July 20, 2015
The rear fuselage section was glued whit no modifications
6
July 20, 2015
The resin cockpit is nice. First I glued the main part on the right side. The front wheel well was separated from it.
7
July 20, 2015
Once the cockpit main part is in place I could place the front wheel well independebtly to find a good fit.
8
July 20, 2015
So here the new front fuselage is glued to the rear section.
9
July 20, 2015
The new spine is in place.
10
July 20, 2015
The original wings were placed too.
11
July 20, 2015
Some Mr. surfacer was used to fill the gaps.
12
July 20, 2015
On the belly the fit was good too.
13
July 20, 2015
Scratching the F.O.D. covers.
14
July 20, 2015
The brengun ladder is great !
15
July 20, 2015
Here the ladder built and the F.O.D. cover parts ready to be painted red.
16
July 20, 2015
Dry fit with the ladder.
17
July 20, 2015
Part of the flap was removed because of the drop fuel tank under the wings.
18
July 20, 2015
PJ canopy was cut to be glued in an open position.
19
July 20, 2015
Dry fit with the ejection seats.
20
July 20, 2015
Moulding a new instrument panel cover.
21
July 20, 2015
New instrument cover dry fit.
22
July 25, 2015
23
July 25, 2015
24
July 25, 2015
25
July 25, 2015
26
July 25, 2015
27
July 25, 2015
28
July 25, 2015
29
July 25, 2015
30
July 25, 2015
31
July 25, 2015
32
July 25, 2015
33
July 25, 2015
34
July 25, 2015
35
July 25, 2015
36
July 25, 2015
37
July 25, 2015
38
July 25, 2015
39
July 25, 2015
40
July 25, 2015
41
July 25, 2015
42
July 25, 2015
43
July 25, 2015
44
July 25, 2015
45
July 25, 2015
46
July 25, 2015
47
July 25, 2015
48
July 25, 2015
49
July 25, 2015
50
July 25, 2015
51
July 25, 2015
52
July 25, 2015
53
July 25, 2015
54
July 25, 2015
55
July 25, 2015
56
July 25, 2015
57
July 25, 2015
58
July 25, 2015
59
July 25, 2015
60
July 25, 2015
61
July 25, 2015
62
July 25, 2015
63
January 8, 2016
64
January 8, 2016
65
January 8, 2016
66
January 8, 2016
67
January 8, 2016
68
January 8, 2016
69
January 8, 2016

Komentáře

20 19 July 2015, 08:22

Stefan Schneider
Any pictures of the completed model? The Revell kits depicting the Hunter are great and I'd love to see this one.

19 July 2015, 09:20

Prieur Gaël
Sympa ton projet !
il existe en biplace tout plastique non?

19 July 2015, 09:44

Pierre-Christian Baudru
Hi Stefan, yes I have several pics of the completed model. I will post first the build pictures and very soon the final ones. In fact the revell kit is great !

20 July 2015, 06:54

Pierre-Christian Baudru
Salut Gael, merci pour ton message ! Oui il exist le kit Xtrakit du biplace 100% plastique. Il est bien avec même de la photo découpe dans la boite. Faut voir pour les ajustements et vérifier s'ils sont bons...au moins sur cette convertion avec le kit revell je n'ai pas eu de problèmes de ce genre.

20 July 2015, 06:57

Paulo Henrique Marins Cezario
Pierre, que serra é essa que vc usou?

20 July 2015, 13:28

Pierre-Christian Baudru
Fala, é uma serrinha da Hasegawa. Nao é das mais fininhas, e por isso mesmo nao dobra a toa. ABs.

20 July 2015, 13:57

Paulo Henrique Marins Cezario
blz, valeu.
abs kogyro.

20 July 2015, 14:41

Edgars Bizūns
Awesome 🙂

23 July 2015, 08:50

Bart Goesaert
nice conversion...

23 July 2015, 09:05

uncle chop chop
Ild say!!

23 July 2015, 09:56

komoras
Masterwork! Great Hunter! 👍

8 January 2016, 06:35

Pierre-Christian Baudru
Thanks guys !

8 January 2016, 06:59

Soeren R.
Great work Pierre! 🙂

8 January 2016, 07:02

Bulldog Scale Models
excellent work

8 January 2016, 07:16

Bernd Korte
Very nice work!

8 January 2016, 07:16

Bart Goesaert
very nice, with a lot of attention to the details... for the dials, did you spray though the drilled out openings and did you then make/scratch the details with a knife? And for the canopy, do you cut it, or push the shaving knife through the vacform cocpit...

8 January 2016, 08:47

Pierre-Christian Baudru
Thanks guys ! Bart, for the dials, once they were painted black trought the opennings I just used a needle to represent the details. You can also paint using other colors if you want. Don't forget a gloss varnish layer on the dials before to place the perforated layer. For the canopy I used a GILETTE blade to cut it guided by tamiya tape placed at the join. Cheers.

8 January 2016, 10:54