Mini Art's "A Dispatch rider asleep on his motorcycle".

1
November 15, 2015
To begin with, it was the box art that made me want to get these kits in a series, as it is a subject that no other manufacturer has addressed and the detail will not disapoint those who build them.
2
November 15, 2015
And, for the record, this one is sure to be the image used for the box art. 🙂
3
November 15, 2015
After trolling through hundreds of images, I found one that looks similar to the box art. 🙂
4
November 15, 2015
Like the pits at Datona 100 of the 40's hehehe. 🙂 and an idea for a dio me thinks. 👍
5
November 15, 2015
The etched brass items are some of the most delicate I have ever seen, right down to the "Wing nuts" for the clamps on the battery terminals.
6
November 15, 2015
These items are found attached to the "A" runner and are compatable with all the other model of the series.
7
November 15, 2015
As the two parts are squezed together, the spokes will get lodged in the lower half of the tool and extreme care needs to be taken to remove it without any damage.
8
November 15, 2015
Squeezing very hard is the best way to get the brass to take it's new shape.
9
November 15, 2015
To remove the spokes takes some very careful work, as it is just so easy to deform the item if going too carelessly at lifting the edges from the tool where it will become lodged.
10
November 15, 2015
A small number of ejector pin marks will have to be removed here, as they will prevent a perfect marrage of the surfaces when glued together.
11
November 15, 2015
I have used the Tamiya super glue dispenser to govern how much glue reaches the parts I want anchored, and as you can see, it is the middle ring that gets the spokes fitted first.
12
November 15, 2015
The diamiter of the holes on the centre of both wheel spokes are totally different, so pay close attention to which is which.
13
November 15, 2015
These ejector pin marks inside the rims here were quit large and would have prevented the mating of the rims difficult.
14
November 15, 2015
The tread pattern of the tyers will all interlock perfectly if the locater pins fit to the holes , otherwise there will be no match.
15
November 15, 2015
Both the front and rear wheels are now ready for the relative hub centers to be fitted.
16
November 15, 2015
17
November 15, 2015
18
November 15, 2015
19
November 15, 2015
Pay attention to every wrinkle and bend otherwise it will not fit well at all.
20
November 15, 2015
21
November 15, 2015
22
November 15, 2015
23
November 15, 2015
The instructions are well laid out and clear to follow, with colour coded graphics denoting the action to be taken.
24
November 15, 2015
25
November 15, 2015
26
November 15, 2015
Like all models, there will be a small amount of clean up, but with this kit there seems to be virtually none, but I am just pedantic about getting rid of anything that would detract from the finish.
27
November 16, 2015
28
November 16, 2015
It is by no means, a big item, and handling all these small parts can only be done one way. That is with care and patience and a bloody sharp blade.
29
November 16, 2015
30
November 16, 2015
31
November 16, 2015
32
November 16, 2015
33
November 16, 2015
34
November 16, 2015
35
November 16, 2015
36
November 16, 2015
37
November 16, 2015
38
November 16, 2015
39
November 16, 2015
40
November 16, 2015
41
November 16, 2015
42
November 16, 2015
43
November 16, 2015
44
November 16, 2015
45
November 16, 2015
46
November 16, 2015
47
November 16, 2015
48
November 16, 2015
49
November 16, 2015
50
November 16, 2015
51
November 16, 2015
52
November 16, 2015
53
November 17, 2015
54
November 17, 2015
55
November 17, 2015
56
November 17, 2015
57
November 17, 2015
58
November 17, 2015
59
November 17, 2015
60
November 17, 2015
61
November 17, 2015
62
November 17, 2015
63
November 17, 2015
64
November 17, 2015
65
November 17, 2015
66
November 17, 2015
67
November 17, 2015
68
November 17, 2015
69
November 17, 2015
70
November 17, 2015
71
November 17, 2015
72
November 17, 2015
73
November 17, 2015
74
November 17, 2015
75
November 17, 2015
76
November 17, 2015
77
November 17, 2015
78
November 17, 2015
The upper torso with hands clasped.
79
November 17, 2015
The "Pose" is hard to get right as there is very little 'space' to play with.
80
November 17, 2015
81
November 17, 2015
All finished except the head, which will have to be on a slight turn and chin down position.
82
November 17, 2015
Like so. 🙂
83
November 17, 2015
These front fork equipment support frames are so hard to get exactly right, but I did my very best to do it. 🙂
84
November 17, 2015
They went on without a hitch.
85
November 17, 2015
86
November 17, 2015
This is the gear lever knob, and I had to get some drilling done to make sure the lever would fit. :-/
87
November 17, 2015
The mechanics are a great build, and in the following images, you will see the potential for a great diorama. 🙂
88
November 17, 2015
89
November 17, 2015
90
November 17, 2015
91
November 17, 2015

Komentáře

15 November 2015, 19:35

Kerry COX
The box art is very convincing and is what will inspire a modeller to get and build these most excellent kits.

15 November 2015, 19:49

M.Julian Marles
I agree, very natural and realistic poses and scenes!

15 November 2015, 20:19

Kerry COX
I am sure there is a photograph of exactly this scene somewhere on file. for sure. 🙂 👍

15 November 2015, 20:21

M.Julian Marles
Yes they do seem to use a lot of photos!

15 November 2015, 20:23

Kerry COX
It's just the accuracy I like in the model it's self really.

15 November 2015, 21:27

Es-haq Khosravi
Great job! I'm waiting to see another masterpiece!

15 November 2015, 21:39

Kerry COX
Es-haq, thanks my friend, and I have several of these kits a great lot of potential for a diorama.:-O

15 November 2015, 21:43

Rui S
Hi, Kezza.
Nice review on these great kits. Do you find them expensive?
You don't need any aftermarket item for a great OOB job with this ones.
So 👍 for MiniArt

16 November 2015, 15:40

Kerry COX
Rui.My kits cost on average, $30.00 Au, but I see on the web, twice that much is being asked. WHY.?
bnamodelworld.com/mi..liceman-w-motorcycle

16 November 2015, 17:34

Rui S
I was asking for your feeling about quality/price relation.
I see that it cost 16,95€, in MBK.

16 November 2015, 17:52

Kerry COX
Ah, my misunderstanding.
The quality of the kits/detail is worth the price for me here, but overseas, they seems to be overpriced.

16 November 2015, 18:40

Wayne Hale
$24.00 at Sprue Brothers in U.S. store.spruebrothers.com/product_p/mia35176.htm

16 November 2015, 18:48

Kerry COX
Wayne, That is good value if you live there, but as always, the exchange rate and the postage and handling make it all average out to 30/35 no matter where you live.:-/
But as I said to Rui, the quality and detail in these Mini Art kits really is something good. 🙂

16 November 2015, 19:49

Arne Greve
Hi Kerry, I´m really happy about your step-bye-step. I have the motorcycle since years on my bench, but I stop the working on the cylinder, because they are don´t fit. Well, now I saw, you cut them. Easy. I will "my" cut too, so I can work on the Harley.
Thanks for that!

17 November 2015, 09:35

Kerry COX
Arne, I am pleased I could help in some small way. 🙂
I am really happy with the way things have gone, but like all kits, some things just don't fit. LOL 👍

17 November 2015, 11:59

Kerry COX
The mechanics need painting and the Harley is just about ready for the paint shop too. :-0

17 November 2015, 22:56

Album info

A Dispatch rider asleep on his vehicle is an other part of Mini Art's 1/35 WLA bike series, and it's an exciting thing, as it is basically the exact same bike but with different figures doing different things, making for a great diorama of a garage in the field with a lot of "Activity", and taking into consideration my first effort was a bit rough, I have this time done everything as exactly as instructed.

Všechna alba

Zobrazit všechna alba »