The "Bronco" T80E Workable track link set. AB3565

1
January 10, 2017
There are now more model manufacturers on the market than at any other time, and ALL of them have something excelent for the fussy modeller, and this track set is one example of brilliance.
2
January 10, 2017
The 'instructions' are basic, but with enough information to get the message across as to where every thing fits
3
January 10, 2017
To 'simplify' the whole process. I started with zip lock plastic bags with the number and prefix letter of the part taped on the outside of each bag. A1 then A2 then A3 then 'B' for the pivot pins.
4
January 10, 2017
The removal and clean up of all the parts first will help speed the build process so much better.
5
January 10, 2017
These 'flow gate' points must be removed completly. BUT. Great care and attention is needed here, as the pivot pins are extremly thin and brittle. So, PLEASE, take extra care when addressing this issue, otherwise, they are 'unrecoverable' if damaged.
6
January 10, 2017
I used a piece of wood from the icecream stick, positioning it under the flow gate point and gently slicing the part from the tree point.
7
January 10, 2017
The amount of waste is more than what is in the actual finished kit. :-/
8
January 10, 2017
9
January 10, 2017
10
January 10, 2017
11
January 10, 2017
This is one process. having all the outer track links laid out first, but one track link at a time is better, as you have more control over all the parts.
12
January 10, 2017
IT is VITALLY important that you use only the right amount of glue when assembly of these small parts takes place, as any excess will "flow" to where it will inhibit any free movement you want.
13
January 10, 2017
On each 'pivot pin' is a lug at either end. This lug MUST be visible for the right assembly proceedure, other wise, when it comes to the fitting of the 'Guide horns', they will not fit.
14
January 10, 2017
85 links need to be built, so I made sure I kept 'track' hahaha of how many I had done by marking off four at a time. Actually, for the tamiya M40 kit, 86 links are required.
15
January 10, 2017
16
January 10, 2017
17
January 10, 2017
18
January 10, 2017
19
January 10, 2017
20
January 10, 2017
21
January 10, 2017
22
January 13, 2017
23
January 13, 2017
24
January 13, 2017
25
January 13, 2017
26
January 13, 2017
27
January 13, 2017
28
January 13, 2017
29
January 13, 2017
30
January 13, 2017
31
January 13, 2017
32
January 13, 2017
33
January 13, 2017

Komentáře

10 January 2017, 08:06

Dan M
Very useful album! I watched it with great interest for future projects. Thank you very much for all the explanations!

10 January 2017, 18:18

Kerry COX
Good to know guys. I was really stoked by the end result, as when I first saw it, I said "Yeah, right. Like this is gonna' happen. :-O
If I had a great video camera, It would have been a whole lot simpler to show how it all went together. But, Oh well. :-/

10 January 2017, 21:59

Album info

This track set is perfect for the Tamiya M40 Self Propelled Gun in the Sherman chassis. Featuring the wider tread that went on the "Easy 8" And when done with all due care and diligence, turn out to be a fantastic model in it's own right.
This is a step by step process of the build, and I can not stress enough, ALL excess plastic MUST be removed without damaging any parts in the process.

Všechna alba

Zobrazit všechna alba »