Tamiya's Repsol Honda RC213V'14

1
September 17, 2017
2
September 17, 2017
I have attacked the exhaust system first, as what I do with it will set the tone for what else I have planned. I do hope you like what I am about to show you all.
3
September 17, 2017
4
September 17, 2017
5
September 17, 2017
6
September 17, 2017
7
September 17, 2017
Both sets are now to be painted the clear yellow.The 'dust'on the surface is polished off with a pair of cotton gloves, rubbing gently, and the chrome looks better than chrome. !!!
8
September 17, 2017
This is one of the most spectacular aspects of the latest Moto Gp bike technology. And the welding and heat leave these almost 'pretty'colours behind. I love it.
9
September 17, 2017
10
September 17, 2017
11
September 17, 2017
12
September 17, 2017
13
September 17, 2017
14
September 17, 2017
Even if it didn't turn out well, I can always go back and start all over again.
15
September 17, 2017
16
September 18, 2017
17
September 18, 2017
18
September 18, 2017
On the swing arm, there are strips of semi gloss black that must be done. Thanks to my trusty Parrafilm "M", it turned out well.
19
September 18, 2017
It may not look like it, but this is the same swing arm as the previous image. The light and chrome don't mix.
20
September 18, 2017
And again.
21
September 18, 2017
The carbon fibre decals are now dry.
22
September 18, 2017
It may not look it, but there are 5 different shades of metal paints here. !!!!!!
23
September 18, 2017
24
September 18, 2017
25
September 18, 2017
No matter what. ALWAYS wear your cotton gloves. It will save you a LOT of anguish. 🙁
26
September 18, 2017
One of the more difficult aspects of bike building is the wheel rim paint jobs. So easy to 'overload', in fact, I just may have to strip this back and repeat.
27
September 18, 2017
I am NOT HAPPY with this result. So I will remove the paint and go with the spray can paint I can 'decant' as that is the best way to get the coverage I want without having the part look drowned in paint.
28
September 20, 2017
When ever possible, I always buy two of the same model and in this case it is no different BUT, the 'update fork sets' were $35 here each, but from Japan, two for the price of one with postage. Go figure.
29
September 29, 2017
Masking off is all about clean edges when the mask is removed. I prefer masking in a way that as soon as you have laid down the last coat of paint. STRIP the masking while the paint is wet. Clean edges result.
30
September 29, 2017
The front discs are carbon fibre. The 'colour' I use is German RLM Grey. the inner metal is left bare plastic, highlighting the fastening bolts with just a dab of silver. The rear disc is steel.
31
September 29, 2017
These gems deserve the treatment of making them look like they BELONG on the bike and would make perfect sense to paint them as such, and leave the fairing OFF.
32
September 29, 2017
Any reference image of these latest Honda's all show this almost gold metal, built up of dozens of pieces and welded by a computer welding jig, leaving a 'signature' of heated metal that changes the colour of where the seam lines from the weld are left.
33
September 29, 2017
The strange looking 'protrusion' on the throttle side is a safety measure, following an horific crash when the brake lever was hit buy an other rider at the start of a race, jamming the brakes on and flipping the bike and rider end over end.
34
September 29, 2017
Using clear plastic tubing, I replicated the hydraulic brake and cluth fluid lines by running some clear green into the tube and removing it before attaching it to the resevors, giving it a more 'authentic' look.
35
September 29, 2017
Being such short pieces, I attached them first saving the effort of trying to locate them when it was finished.
36
September 29, 2017
The result is as real as you can get.
37
September 29, 2017
Alclad base black first. Then the 'chrome' alclad, followed by clear Tamiya yellow to create the 'gold' look. THEN, winding ultra flexable thin plastic tubing around the pipes, creating a 'space' where the weld marks are to appear, spraying clear blue.
38
September 29, 2017
Even though most of the colours of the pipes will not be seen, but what is visible, it will look OK.
39
September 29, 2017
It may look "A bit much" to some of you, but better this than nothing at all, and that is what we are all about I believe, getting a good result rather than hearing, 'you could have done this'.
40
September 29, 2017
41
September 29, 2017
42
September 29, 2017
43
September 29, 2017
Now. This is where it got confusing. The "recomended" colour in the instruction said TS-96, 'fluro orange', the same as the wheels. BUT, look at the fairing, it is an orange yellow, several shades lighter than what is called out. So, I made my own colour.
44
September 29, 2017
You will notice here that I have a really sharp edge to the colour. I masked up with a 'tag' hanging off that I could grab and lift the mask off while the paint is still wet. NO feathers. 🙂
45
September 29, 2017
I get the glossy look by 'loading' the paint on in stages, and as it gets a 'wet' look, I stop just when it all looks equal.
46
September 29, 2017
47
September 29, 2017
48
September 29, 2017
No dust or blemishes at all. I am really pleasede that I have perfected this technique, as the results are great.
49
September 29, 2017
50
September 29, 2017
51
September 30, 2017
Now I wait for a couple of days to a week to let the paint 'cure' before I start adding sticky masking tape that will leave marks that just cant be removed.
52
September 30, 2017
The tyre decals and the small ones on the rims are flimsy and difficult to master, but patience and the use of the glue substance from the decal paper is ideal for getting adhesion on the spot your placing them on the rims. The tyre ones are adhesive back
53
September 30, 2017
Lucky I noticed it when checking what I had photographed. The spot between the repsol and the HRC sticker has a curl under, so I went to work and fixed it before it dried.
54
September 30, 2017
All fixed and clean.
55
September 30, 2017
56
October 1, 2017
Spanjaared. There are actually three tubes here. The brake line. Motion sensor. And a clear tube that ends on the bottom of it all. See it.?

Komentáře

17 September 2017, 11:21

Martin Oostrom
Top work. As usual 👍

17 September 2017, 12:01

Kerry COX
Thank you Martin. I had only just unwound the wire and I just HAD to post it mate. hehehe All excited at how well it turned out and just HAD to share. 🙂

17 September 2017, 12:14

Alexander Grivonev
Having this kit in my stash, also with the fork update i thought about building this it in the near future...definitely will follow your WIP to see where the stumbling stones are 😛 That exhaust looks fantastic btw!

18 September 2017, 10:35

Holger Kranich
Great exhaust painting! But i guess the Repsol logo will be tricky to apply...

18 September 2017, 11:48

Björn Svedberg
Nice detail painting! I'll be following the build as it is one of the kits I really want to build in the future.

18 September 2017, 11:51

Spanjaard
looking amazing already, and you just started. i will not miss this one for the world 🙂

18 September 2017, 11:54

Kerry COX
All my distinguished friends, I am really pleased with the progress so far, but as always, TIME must be spent in doing all the tedious chores. Like seam lines and flow gate removal and all the ejector pin marks. Alclad preparation is time consuming, but be warned, get a big stock of cotton gloves, as you cant afford ANY finger marks to show on this little gem. 🙂
I am stoked you like it so far. 👍
Thank you all. 🙂

18 September 2017, 12:39

Michael Hickey
Looks really sweet so far.

18 September 2017, 12:42

Kerry COX
Thank Michael. I do appreciate your opinion mate. As always. 👍

18 September 2017, 12:45

Choppa Nutta
love it 🙂

21 September 2017, 00:49

Alexander Grivonev
Doesn't look too bad, that rim. Just to clarify, you buy two kits and accessories to build ONE model in case you screw something up majorly?

21 September 2017, 08:31

Kerry COX
Alexander, NO NO NO. I am building one bike in "Wet race" set up with wet tyres and the second with the "Dry race" slicks. All in a small 'garage' /pits dio scene. 🙂 👍

21 September 2017, 09:54

Kerry COX
With having two kits the same, it allowes you to portray a different scene with each. Like my TAKOM 1/35 King Tiger. I opened it up in a 'cut away' and the other, it will be 'war weary', with superficial damage from small arms and maybe the odd hit from someone who managed to 'get a hit'. 🙂

21 September 2017, 09:57

Johne 69
Hy Kerry looks great so far. 👍 I wish you good luck for the rest of the building.

21 September 2017, 11:37

Alexander Grivonev
Cool, looking forward to that!

21 September 2017, 11:39

Kerry COX
Johne and Alex, Greatly appreciate your thoughts and comments guys. 👍
I am waiting for the right paints to arrive and then I will get too and have some serious fun. hahahaha 🙂

21 September 2017, 12:00

Alexander Grivonev
Awesome idea with the braking fluid! Fantastic painting job, too. The exhaust indeed looks very unusual and "colourful" but in the end when all parts come together i bet it will look awesome. Looking forward to it!

30 September 2017, 10:01

Kerry COX
Alexander. I am most grateful for you comments mate.👍
I have just seen where I can get some micro thin tubing that can better replicate the brake and throttle lines to a more believeable scale than the Tamiya garden hose size stuff. 🙂
Also some .050" hex bolt heads to replace the phillips head screws that completely kill these kits because of the ship rivet type look. 🙁
All American stuff, but SO cheap for what you get.
BTW,I HATE poor paint jobs, especially ones that have an 'orange peel' look.
But that's just me. Oh well.
Cheers.👍
Kez.

30 September 2017, 10:34

Spanjaard
what are you using for the tubing?

1 October 2017, 08:32

Kerry COX
Spanjaard, At the moment, I have to content myself with what is in the box, but here is the link to the video where I saw the micro tubing used. Youtube Video Go to the 47th minute on the timeline and he discusses the tubing. Cheers. 👍

1 October 2017, 10:10

Spanjaard
those micro tubes may come handy... i found a couple of things
hareline.com/tub123.html
hmhvises.com/tubeflygear.php#tubes
even one shop around here flyandspin.nl/hareline-tubing-serie.html

1 October 2017, 10:48

Kerry COX
By the looks of it, one can replicate the double tube system on the front brakes quite nicely. 🙂 I will post an image of what I mean.

1 October 2017, 11:25

Choppa Nutta
That last photo looks so real !! 😉 😄

1 October 2017, 11:53

Spanjaard
the clear should be possible with the thinnest and transparent of hareline, or maybe the middle one. right?

1 October 2017, 12:58

Kerry COX
Even thin fishing line would give the same result. It 's not like its going to actually be hollow. I am going to get some, but first, I need to see what it is like. So I will get a pack of each and do an album on it and all that jazz. Yes. ? AND, In that video or one of the ones he made, he had bought some hexagonal bolt heads that were "Acorn Nuts" .050". from RB Motion.com Amazing stuff, all for the scale modeller of vehicles mainly, but there are certainly many other applications for what they have. google.com.au/url?sa..XA3dFI6RVDS5LluG9Tj5

1 October 2017, 13:17

Spanjaard
pretty detail stuff there! thanks for the link

1 October 2017, 16:33

Kerry COX
A world of discovery at every touch of the keyboard guys. Anything and everything is out there. All for our pleasure and the spectators delight. hehehehe 🙂 👍.

1 October 2017, 20:58

Album info

This will be the "full montey" build, meaning the front forks update kit, and what's the point in doing the front if you don't do the back end. I will be covering the appropriate parts that are made of Carbon fibre with the decal of the same and I will be paying special attention to the exhaust system and it's unique look and colour. I hope you like what I am about to do.

Všechna alba

Zobrazit všechna alba »