Hasegawa Maschinenkrieger Falke WiP
Starting off with the seat.
Black base for the Alclad.
Hairspray and rubbed-off primer.
The finished seat with a light dot filter.
Some dryfitting.
Some dryfitting.
Some dryfitting.
The cockpit tub: primed with Surfacer 1200.
Black base for Alclad
Alclad base
First attempt with hairspray and H57 - looked shitty due to the gloss. So I removed it.
Second attempt: This time I used some flat base.
And here the whole cockpit tub after washing, drybrushing and filters.
Preparing the hatch with Surfacer
Black base for Alclad
Alclad base
Interior color on hairspray
The cushion (?) was finished using Vallejos.
Cockpit sidewalls
Instrument panel with chipping
Decals on
The whole cockpit tub
Used an aircraft decal for a random warning stencil.
Tub installed
Closing up the fuselage
Closing up the fuselage
Primed with Surfacer 1200
Primed with Surfacer 1200
Primed with Surfacer 1200
Primed with Surfacer 1200
Did some sort of casting for the best green color.
Dirty areas black based
Dirty areas black based
Some dark grey for the engine area
Some dark grey for the engine area
Green base coat
Yellow pre-shading
Blending it in with the base color
Field repairs an touch-ups
Field repairs an touch-ups
Now for the red tips ...
Protect the green base coat
Off-white as base and for the white borders
Protect the white borders
Now for the bright red!
Post-shading with yellow
Blending it all in
The best moment is when the masking comes off!
Clear cote in preparation for the decals
Details in the engine area
Decals!
The bright white of the decals was muted with Tamiya Smoke
Washing starts
Dot filter with oil colors
Here you see slight blue tint caused by the filter
Blue filters (lower arrows) and brown filter (upper arrow)
Filters on the gun casing
Blue filter to accent the panel edge
Now for the details: black base for the nozzle
Alclad
Gun primed
Coal black
... and weathered with pigments
Now is the time to build a little display base
Almost finished! some weathering for the engine area.
Filters for the anti-grav balls
The gun bay received some weathering, too.
Dot filters
And some dull cote to finish
That's it! Check the gallery album for a walk-around of the finished Falke.
Komentáře
1 17 December 2017, 12:50
Album info
The Ma.K. Falke under construction.