WIP Nieuport 17 Flyboys

1
January 10, 2018
No need to scratch with such parts.
2
January 10, 2018
3
January 10, 2018
Last field not wood but linen!!!
4
January 10, 2018
Corrected and washing.
5
January 10, 2018
And nothing visible!
6
January 10, 2018
7
January 10, 2018
8
January 10, 2018
First painting, some parts not yet mounted.
9
January 10, 2018
Cowling to thick, as usual.
10
January 10, 2018
11
January 10, 2018
Not its ok
12
January 10, 2018
Cut out and new hinges.
13
January 10, 2018
14
January 10, 2018
Actual state.
15
January 20, 2018
With more parts the engine diameter grows.
16
January 20, 2018
24mm alu and a lathe are a solution!
17
January 20, 2018
18
January 20, 2018
19
January 20, 2018
drawing line barely visible!
20
January 20, 2018
Tight fit.
21
January 20, 2018
Engine fits.
22
January 20, 2018
Dividing head on milling machine.
23
January 20, 2018
The result.
24
January 28, 2018
25
January 28, 2018
26
January 28, 2018
27
January 28, 2018
28
January 28, 2018
29
January 28, 2018
30
January 28, 2018
Happy little accident ...
31
February 4, 2018
32
February 4, 2018
33
February 4, 2018
34
February 4, 2018
35
February 4, 2018
36
February 4, 2018
37
February 4, 2018
38
February 4, 2018
39
February 4, 2018
40
February 4, 2018
41
February 4, 2018
42
February 4, 2018
43
February 4, 2018
44
February 4, 2018
45
February 4, 2018
46
February 4, 2018
47
February 4, 2018
48
February 4, 2018
49
February 4, 2018
50
February 4, 2018
51
February 9, 2018
Intake pipes are replaced by real metal
52
February 9, 2018
3 layer wood for the V-struts
53
February 4, 2018
struts are created.
54
February 9, 2018
A 100% crop of a wikipedia picture: [img1]
1
55
February 9, 2018
Soldering a brass ring with brass plate.
56
February 9, 2018
More original compared to Eduard.
57
February 9, 2018
Struts are painted, metal is prepared and glued to the wood. With brass pins the struts are plugf to the upper wing.
58
February 9, 2018
Cover of the hinge below lower wing.
59
February 9, 2018
Struts masked for painting of securing stripes.
60
February 9, 2018
Huge square holes take the struts.
61
February 9, 2018
My work compared to the original.
62
February 19, 2018
Small metal outlets (from a Camel PE)
63
February 19, 2018
added to the elevator.
64
February 19, 2018
Control horns added, details painted.
65
February 19, 2018
New struts made frome flattened brass pipe.
66
February 19, 2018
Struts mounted.
67
February 19, 2018
Control wires done.
68
February 19, 2018
Parts for scratched skid assembly.
69
February 19, 2018
finished ...
70
February 19, 2018
and mounted.
71
February 19, 2018
Strong enough to carry the model!
72
February 27, 2018
Wooden windscreen frame.
73
February 27, 2018
74
February 27, 2018
75
February 27, 2018
76
February 27, 2018
77
February 28, 2018
78
February 28, 2018
79
February 28, 2018
80
February 28, 2018
81
February 28, 2018
82
February 28, 2018
83
February 28, 2018
The front part of the Vickers is soldered kit from Part.
84
February 28, 2018
85
February 28, 2018
86
February 28, 2018
87
February 28, 2018
There is a small coil on top of the barrel.
88
February 28, 2018
89
March 1, 2018
Turned/milled fuel and oil caps.
90
March 1, 2018
91
March 1, 2018
92
March 1, 2018
93
March 1, 2018
94
March 1, 2018
95
March 1, 2018
96
March 1, 2018
97
March 1, 2018
98
March 1, 2018
99
March 1, 2018
100
March 1, 2018
101
March 1, 2018
102
March 1, 2018
103
March 1, 2018
104
March 1, 2018
105
March 1, 2018
106
March 1, 2018
107
March 1, 2018
108
March 1, 2018
109
March 1, 2018
110
March 1, 2018
111
March 1, 2018
112
March 1, 2018
113
March 1, 2018
114
March 1, 2018
115
March 2, 2018
116
March 2, 2018
117
March 2, 2018
118
March 2, 2018
119
March 2, 2018
120
March 2, 2018
121
March 2, 2018
122
March 2, 2018
Made a new air screw (in the middle).
123
March 2, 2018
124
March 2, 2018
125
March 2, 2018

Komentáře

3 10 January 2018, 21:22

bughunter
Since the engine was still a tight fit with more parts, I need more space under the cowling .... and finally destroyed the cowling! So a new solution was needed!

20 January 2018, 20:22

Marcel Klemmer
Crazy, absolutely crazy....

20 January 2018, 21:54

Spanjaard
holy molly... "a new solution was needed"... looking fantastic... i wish i could have space for this kind of tools 🙂

20 January 2018, 21:57

Peter Straka
insane! IMO the new cowling looks much better than the original part

21 January 2018, 19:21

Alexander Grivonev
Amazing👍

21 January 2018, 20:42

Bastian Bäuerle
Looks good! If you have the necessary tools at home you can do everything you want!

21 January 2018, 21:23

Erik Leijdens
Amazing...

21 January 2018, 21:27

Spanjaard
you also need to know how to use them... and no doubt bughunter does 🙂

21 January 2018, 23:22

Alec K
Nice machining 👍

22 January 2018, 00:39

bughunter
A little bit of progress with the fist primer and color.

28 January 2018, 19:59

Martin Oostrom
I wish I had the tools, I wish I had the skills, I wish I had the talent, etc, etc
Another top job Bughunter.

28 January 2018, 20:03

Peter Hardy
Three wishes Martin?

29 January 2018, 03:16

Martin Oostrom
Nah, too many to mention when I look at the Bughunter's work. Didn't want to highjack his build thread and get banned by Tim

29 January 2018, 06:14

Peter Hardy
Lol!

29 January 2018, 08:39

Greg Baker
Is there an emoji for just standing there in disbelief with a bit of drool coming out of your mouth?

29 January 2018, 11:58

bughunter
Thank you mates for your nice words! Martin, sometimes my macros are very detailed, to show how I have done things. May be it fulfills some of your wishes 😉

29 January 2018, 19:21

bughunter
Some progress with decals and first weathering.

4 February 2018, 21:36

Martin Oostrom
Sigh.
Gorgeous.
Thank you for all the lessons and inspiration!

4 February 2018, 22:09

Spanjaard
wow, finish line is very close now.... i agree with Martin of course

4 February 2018, 22:40

bughunter
Thank you, my friends! But I think it will take time to cross the finishing line, some wooden parts to be done, some details missing, rigging, engine finishing and mounting. I will add some text to the pictures.

5 February 2018, 19:20

Spanjaard
we will be patient 🙂

5 February 2018, 19:26

Peter Hardy
This is wonderful Bughunter! I will try to be patient.

6 February 2018, 10:30