Dreaming of Barra ...
![Album image #1 Album image #1](/albums/img/7/2/6/953726-13641-84-720.jpg)
![Album image #2 Album image #2](/albums/img/7/2/7/953727-13641-19-720.jpg)
![Album image #3 Album image #3](/albums/img/5/5/8/954558-13641-43-720.jpg)
![Album image #4 Album image #4](/albums/img/0/6/1/958061-13641-22-720.jpg)
My kit lacked a seat, so I had to modify some Amodel leftovers.
![Album image #5 Album image #5](/albums/img/0/6/2/958062-13641-55-720.jpg)
Cockpit ready for sealing.
![Album image #6 Album image #6](/albums/img/0/6/3/958063-13641-11-720.jpg)
![Album image #7 Album image #7](/albums/img/0/6/4/958064-13641-73-720.jpg)
Lots of filling aterial is needed.
![Album image #8 Album image #8](/albums/img/0/6/5/958065-13641-98-720.jpg)
![Album image #9 Album image #9](/albums/img/0/6/6/958066-13641-11-720.jpg)
Sanding & filling & sanding & filling & sanding & filling & sanding & filling...
![Album image #10 Album image #10](/albums/img/6/0/2/963602-13641-15-720.jpg)
The front gear is better than the original indeed, but desn't really look like a fork though.
Next time I'm gonna rework the plastic part I think.
Next time I'm gonna rework the plastic part I think.
![Album image #11 Album image #11](/albums/img/5/9/9/963599-13641-26-720.jpg)
So the main undercarriage is not worth it IMHO - there is a seam and there are no rivets, also the wheel disc alignment needs correction.
Plastic parts have the sinkholes indeed, but it's easier to fill it that to sand the metal parts.
Plastic parts have the sinkholes indeed, but it's easier to fill it that to sand the metal parts.
![Album image #12 Album image #12](/albums/img/7/1/7/964717-13641-21-720.jpg)
The symmetry is not the strongest point of the Aerocraft undercarriage 😉
![Album image #13 Album image #13](/albums/img/7/1/8/964718-13641-50-720.jpg)
Finally on its own legs. The nosejob still in progress.
![Album image #14 Album image #14](/albums/img/2/0/2/965202-13641-96-720.jpg)
Another set.
![Album image #15 Album image #15](/albums/img/2/0/0/965200-13641-11-720.jpg)
Spinners...
![Album image #16 Album image #16](/albums/img/2/0/1/965201-13641-78-720.jpg)
... prop feathers ... (very interestingly attached)
![Album image #17 Album image #17](/albums/img/1/9/9/965199-13641-49-720.jpg)
... and intakes. Am I blind as a bat or there's no difference? (Matchbox primed black, resin in grey)
![Album image #18 Album image #18](/albums/img/4/9/1/970491-13641-70-720.jpg)
Started rescribing the wings.
![Album image #19 Album image #19](/albums/img/4/9/2/970492-13641-21-720.jpg)
Still some corrections are needed.
![Album image #20 Album image #20](/albums/img/4/9/3/970493-13641-24-720.jpg)
And found some Kibri leftovers in my sparebox.
![Album image #21 Album image #21](/albums/img/4/9/4/970494-13641-89-720.jpg)
So, decided to put them in use.
![Album image #22 Album image #22](/albums/img/4/9/5/970495-13641-15-720.jpg)
And got me some reading material for even more inspiration 🙂
![Album image #23 Album image #23](/albums/img/3/9/5/974395-13641-15-720.jpg)
Used some P-36 leftovers to create the missing vents. The funny thing is the lower one is shown in some views in the instructions 😄
![Album image #24 Album image #24](/albums/img/0/0/3/984003-13641-38-720.jpg)
Ready for painting
![Album image #25 Album image #25](/albums/img/3/6/2/995362-13641-13-720.jpg)
Started some spraying.
![Album image #26 Album image #26](/albums/img/3/6/3/995363-13641-73-720.jpg)
The wing struts are too short. The wings should have 3 degree dihedral. With these struts all I can get is anhedral 🙁
![Album image #27 Album image #27](/albums/img/4/6/9/1002469-13641-72-720.jpg)
So I checked whether I haven't mounted the main undercarriage too low, but well, not.
![Album image #28 Album image #28](/albums/img/4/7/0/1002470-13641-83-720.jpg)
Then it turned out the right wing fits ok.
![Album image #29 Album image #29](/albums/img/4/7/1/1002471-13641-26-720.jpg)
Here's the answer - wings are not symmetrical 🙁
![Album image #30 Album image #30](/albums/img/4/7/2/1002472-13641-73-720.jpg)
Removed that while thinking of the left strut.
![Album image #31 Album image #31](/albums/img/4/7/3/1002473-13641-36-720.jpg)
Filled the left strut and left wing joint a bit with CA glue and here we go! Bit bigger that I thought tbh 🙂
![Album image #32 Album image #32](/albums/img/2/7/7/1039277-13641-44-720.jpg)
Sprayed the black and the the blue.
![Album image #33 Album image #33](/albums/img/2/7/8/1039278-13641-89-720.jpg)
First layer of white surfacer - the fuselage keeps cracking on top, I have to find a fix for that 🙁
![Album image #34 Album image #34](/albums/img/2/9/7/1042297-13641-41-720.jpg)
It's a rainy day today, so I sprayed the white part and removed the masking.
![Album image #35 Album image #35](/albums/img/2/9/8/1042298-13641-26-720.jpg)
There are few corrections needed, but I'm glad with the result.
![Album image #36 Album image #36](/albums/img/0/9/5/1058095-13641-29-720.jpg)
That raster is disappointing 🙁
![Album image #37 Album image #37](/albums/img/0/9/4/1058094-13641-82-720.jpg)
Seems like the plus of 26decals is their flexibility 👍
![Album image #38 Album image #38](/albums/img/2/8/6/1085286-13641-87-720.jpg)
On her own wheels! 🙂
![Album image #39 Album image #39](/albums/img/9/1/9/1131919-13641-58-720.jpg)
Added the PE wipers
![Album image #40 Album image #40](/albums/img/9/1/7/1131917-13641-41-720.jpg)
![Album image #41 Album image #41](/albums/img/9/1/8/1131918-13641-94-720.jpg)
The props are there finally.
![Album image #42 Album image #42](/albums/img/4/9/7/1132497-13641-74-720.jpg)
![Album image #43 Album image #43](/albums/img/4/9/8/1132498-13641-54-720.jpg)
![Album image #44 Album image #44](/albums/img/4/9/9/1132499-13641-38-720.jpg)
The smoke is too grainy for my taste and I found the missing underside light. Apart from that it seems complete.
![Album image #45 Album image #45](/albums/img/0/7/3/1135073-13641-88-720.jpg)
![Album image #46 Album image #46](/albums/img/0/7/4/1135074-13641-20-720.jpg)
![Album image #47 Album image #47](/albums/img/0/7/6/1135076-13641-48-720.jpg)
![Album image #48 Album image #48](/albums/img/0/7/7/1135077-13641-11-720.jpg)
![Album image #49 Album image #49](/albums/img/0/7/8/1135078-13641-16-720.jpg)
![Album image #50 Album image #50](/albums/img/0/7/9/1135079-13641-39-720.jpg)
![Album image #51 Album image #51](/albums/img/0/8/0/1135080-13641-40-720.jpg)
Komentáře
64 12 March 2021, 21:37
![](/profiles/img/13136-468-s.jpg)
Just have to ask, Lucasz.... What? Having Amodel withdrawals, so need to complex it up a bit?
12 March 2021, 23:50
![](/profiles/img/13641-502-s.jpg)
Well, the appearance of the Aerocraft sets made me curious. Let's see whether I'm gonna regret it 😄
13 March 2021, 20:50
![](/profiles/img/13641-502-s.jpg)
Well, the Caravelle is already on the shelf, but I still have a Hunter and Iskra waiting, just in case 😛
13 March 2021, 21:23
![](/profiles/img/20363-907-s.jpg)
Interesting build, Lukasz, how is the clear resin part of Aerocraft ? Is it thick ?
14 March 2021, 09:16
![](/profiles/img/13641-502-s.jpg)
Thanks Erik. It's thick indeed, but quite clear though - see pic #3.
14 March 2021, 11:00
![](/profiles/img/13641-502-s.jpg)
Thanks. The answer is no, however still hoping to do it one day, hence the project name 🙂
14 March 2021, 13:22
![](/profiles/img/15588-142-s.jpg)
Me too ,,,, even though I've been to a lot of islands in Scotland , I've never been in barra ,,,,, but when I'll do it'll be by plane
14 March 2021, 15:45
![](/profiles/img/13641-502-s.jpg)
Welcome, still hoping this dream will not become a nightmare, even though it's close. I spent last couple of days on sanding and filling.
Next time I'm gonna use only the transparent part from Aerocraft, the rest is simply not worth it. They should release a windshield set only IMHO.
19 March 2021, 22:14
![](/profiles/img/26775-480-s.jpg)
Łukasz you are masochistic! Do you hate yourself? You couldn't even put together a simple Tamiya set anymore! 😄 😄 😄
20 March 2021, 07:21
![](/profiles/img/13641-502-s.jpg)
Gracias. Köszi. Perhaps not Tamiya, but I'm still able to build the new Airfixes, however having issues finishing them 😄
20 March 2021, 20:53
![](/profiles/img/20363-907-s.jpg)
Looking at your comment on the Aerocraft set, I wonder why you should use it ?
27 March 2021, 16:38
![](/profiles/img/13641-502-s.jpg)
Well, I ask myself the very same question. So far the most useful part is the windshield - the kit's one being way to narrow. I'm going to check out the engines soon, stay tuned 🙂
27 March 2021, 16:42
![](/profiles/img/13641-502-s.jpg)
Welcome. I tested another Aerocraft set today just to conclude that I'm unable to find a difference (except for the material used).
28 March 2021, 14:17
![](/profiles/img/13136-468-s.jpg)
The omtales do look a little more rounded on the resin replacements. Might be the Black paint hiding it on the originals, though.
Interesting method of molding the props. I hope the attachment point/Line come off nice and clean.
Had been looking at the gear legs too, but after watching your work, will put off getting any.
28 March 2021, 14:44
![](/profiles/img/13641-502-s.jpg)
Well, the legs needed a lot of primer to look smooth enough. The inlets, props and spinners are too similar for me to take care 😄 So I will either sell them or use them for another kit in the future.
31 March 2021, 14:59
![](/profiles/img/13641-502-s.jpg)
Welcome Dave. It's gonna take a while still. Currently I'm adding the missing details.
Perhaps this is something the Aerocraft should consider? 😛
9 April 2021, 19:49
![](/profiles/img/27826-126-s.jpg)
Łukasz, I know you like the pain of hard plastics, but also good taste. Rivet? 😛
19 April 2021, 19:08
![](/profiles/img/13641-502-s.jpg)
Yeah, I bought a basic Revell riveter some time ago and haven't used it yet. On the other hand the rivets are barely visible on the real thing, so I should focus more on masking probably 😉
19 April 2021, 19:22
![](/profiles/img/20363-907-s.jpg)
With a riveter you will make holes in the plastic, while on the real thing on YouTube the rivets are popping out.
19 April 2021, 19:28
![](/profiles/img/13641-502-s.jpg)
I know 😄 The thing is, the dirty rivets look almost the same as holes 😉
Loganair on the other hand washed the Barra planes after every flight to remove salt, so I decided to skip the imitation of dirty riveting, thanks for your say folks 👍
19 April 2021, 19:52
![](/profiles/img/13641-502-s.jpg)
So, I added all the missing bits and pieces (some inlets, outlets and aerials). Taking break for 2 weeks and then it will be time for painting. I'm leaning towards less orthodox approach - first the dark colours (less masking) and then white overall. Still haven't decided whether to assemble the wings before or afterwards.
21 April 2021, 20:05
![](/profiles/img/27826-126-s.jpg)
But you like to put the windows at the end of building, Łukasz 😛
Looking good so far 👍
22 April 2021, 18:06
![](/profiles/img/46811-191-s.jpg)
Hey mate, another one of the good old matchbox ones. A lot of work to do or making big compromises. That's the deal with them but it looks very promising so far. I'm curious! 👍
21 May 2021, 17:15
![](/profiles/img/13641-502-s.jpg)
Tanks a lot. Matchbox is Matchbox, no doubt about it. Hopefully not so much will be visible in white 😉
24 May 2021, 20:00
![](/profiles/img/44957-709-s.jpg)
Yeap, it would be nice to see this on the newsfeed again (no pressure!)... From Maldives to the Outer Hebrides... the places the Beavers / Otters / Twin Otters go! 😄 BTW - it's been some time I wanted to comment on the "Dreaming of Barra..." title of the project, because - well, yes, isn't that in a way one of the fine things in modelling - taking us to faraway places?! Keep up the great work! 👍
10 July 2021, 21:16
![](/profiles/img/13641-502-s.jpg)
It is indeed Alex - currently I'm torn between Kaapstad (Canberra), Miramar (Tomcat) and Barra 😄
Short update - I finished the main spraying today.
1 August 2021, 13:10
![](/profiles/img/20363-907-s.jpg)
It is always a pleasure to travel with Lukasz through his modeling projects
1 August 2021, 13:59
![](/profiles/img/48972-166-s.jpg)
So, you are approaching the finish line in fantastic style, Łukasz - keep it on! Looks lovely already!
11 October 2021, 19:00
![](/profiles/img/13641-502-s.jpg)
Thanks everyone. Almost a finish line indeed, currently I'm sculpting the Matchbox props into something more realistic 😄
11 October 2021, 19:49
![](/profiles/img/user-s.jpg)
Looking very smart in her new livery and decals. Great results, and still more icing to add to the cake 😉👍
11 October 2021, 20:18
![](/profiles/img/82560-921-s.jpg)
Stunning job on this so far. I agree that the majority of the Aerocraft additions don't really add much to the build, with the exception of the windscreen.. If I were them I'd be releasing that on it's own, perhaps with a set of aerials and inlets/outlets instead—would be much more useful! If my build of this turns out a fraction as good as yours is so far I'll be very happy indeed. Great stuff!
6 December 2021, 19:43
![](/profiles/img/82560-921-s.jpg)
Ooh question for you! I noticed you haven't installed the cabin windows before sealing. I've done the same—was intending to use Krystal Klear to make the windows. Some tests however haven't been promising, they came out a bit wobbly and recessed. What are your plans?
6 December 2021, 19:45
![](/profiles/img/13641-502-s.jpg)
Thanx Ben. Some of them are Kristal Klear, others were made with the Bondic UV glue. The trick with Kristal Klear is the following: make them a tad bulbous, it shrinks later on and position it upside down so it doesn't flow sideways. If it is too bulbous you can iteratively wash it down after drying too. Then I seal it with multiple thin lacquer varnish layers, so they are waterproof enough to decal the kit Hope it helps.
6 December 2021, 20:23
![](/profiles/img/82560-921-s.jpg)
That is super helpful Lukasz, may thanks. Good thing I asked too, I was planning to decal the kit first and then add the windows.. might not be the best idea though as I presume the Krystal Klear would dissolve around the decals!! Good luck with your build, I'll be following progress 🙂
6 December 2021, 21:09
![](/profiles/img/13641-502-s.jpg)
I'm very glad I stumbled upon your build. Hope it will bring my mojo back to finish the props soon. 🙂 You can find Kristal Klear windows on my Avanti and 737 too.
PS. Lovely avatar, innit? 😉
6 December 2021, 21:12
![](/profiles/img/82560-921-s.jpg)
Very glad that it might prove useful for mojo! And I feel much better now about getting these windows sorted so many thanks for providing some reassurance!! Loving the Avanti build you did—pristine, lovely windows and a very cool aircraft too. That's going on my wishlist 🙂
6 December 2021, 22:16
![](/profiles/img/13641-502-s.jpg)
Thanks mates.
Bas, yes it's a lovely livery indeed 👍
Thomas, well the kit is really bad, the decals being not much better to my disappointment, but almost getting there 🙂
21 December 2021, 21:56
![](/profiles/img/17207-773-s.jpg)
Stunning already, considering what it was(or were). Quite inspiring how those cabin windows are created too.
22 December 2021, 12:06
![](/profiles/img/36121-874-s.jpg)
Great creation....could be on a beautiful Hebridean landing strip?....
22 December 2021, 12:13
![](/profiles/img/13641-502-s.jpg)
Almost there, few minor corrections needed and will need some sand to take pics...
22 December 2021, 21:34
![](/profiles/img/49973-772-s.jpg)
That's an amazing result from an old Matchbox kit! Very well done!
23 December 2021, 02:29
![](/profiles/img/13641-502-s.jpg)
Wow, thanks for so much praise 🙂 I found out I have managed to lose one of the tiny underwing fins (actuators?), so I have to scratch one before announcing it finished 🙂
23 December 2021, 08:08
![](/profiles/img/20363-907-s.jpg)
Very nice work, Lukasz, you just need a sandbeach base to do it full justice.
23 December 2021, 12:09
![](/profiles/img/27826-126-s.jpg)
Awesome result, Łukasz!!
I join the prayers for you to make a sandbeach base. This could be an epic Łukasz hangar, part two 😛
23 December 2021, 18:48
![](/profiles/img/13641-502-s.jpg)
Thanks a lot. Took some "Barra" pics today, what is your say mates? 🙂
27 December 2021, 20:33
![](/profiles/img/13641-502-s.jpg)
Oh wow, didn't expect my simple DIY Barra installation to get such a huge praise 🙂 Thanks
PS. I really want to take some more pics on a sunny day, but still need to wait for one.
PS2. I just found out the metal front gear lacks the landing light - what is even more interesting the original Matchbox part includes it 😄
28 December 2021, 19:28
![](/profiles/img/15588-142-s.jpg)
Very vood work ,,,, now waiting for the dream to come true and land or take-off form h
the sands of Barra
29 December 2021, 06:45
![](/profiles/img/34360-107-s.jpg)
Hi. Very nice work. I know the kit - i have some of this kits from revell (reissue: DHC-6 Twin Otter (Revell 04901, 1:72)) because i like the TwinOtter as a typical bush plane with many beautiful colourings in my opinion. I find the kit itself....not so good; i am currently building one myself for several weeks.
15 January 2022, 10:17
![](/profiles/img/13641-502-s.jpg)
Thanks mates. Well yes, the kit is one & only, but not that great indeed. Still, I plan to build the Canadian one in the future.
15 January 2022, 10:38
![](/profiles/img/104159-474-s.jpg)
Thanks for putting this building report up, it has shown me that I might just be fine with it pretty much out of the box instead of going for the extra parts.
As they don't really seem to be worth it.
29 January 2023, 00:16
![](/profiles/img/13641-502-s.jpg)
Thanks. The only advantage of the resin sets is the windshield. The front windows of the kit are to narrow. But this can be fixed with a bit of transparent styrene 👍
29 January 2023, 10:20
![](/profiles/img/user-s.jpg)
A very nice livery. I am happy that I decided against the metal gear as I came to the same conclusion. The props do make a difference and allow you to put them in a feathered position. Some hurdles you cleared are still ahead of me. Air Greenland is my choice.
Beautiful plane you show us here.
29 January 2023, 11:12