T-55A "Marina" (WIP)
Preparing the figure
Preparing the figure
Glueing…
Figure primed with AK grey primer; moulding quality is bad, but the position is very dynamic, I like it a lot
Starting assembly - lots of difficult clean up of parts to do
I guess this will be difficult to clean up… 🙁
And now this: the parts B1, representing the rubber part of the wheel. If I glue them as per instructions, then there is no rim to the wheel and there a huge rubber height on the outside where the rim should be. If I glue them the other way around, it'll fine on the outside, but on the inside (between wheels) will have no space for the tracks' teeth. So, I'm glueing the ouside wheel reversed, and inside wheel as instructed. The inside wheel will be wrong... but will not be seen. What a lousy kit!!!
Example of wheels with outside rubber part reversed
Well…. I think I’ll use the rubber parts as per instructions after all. Wheels are not deep enough with them reversed
From left to right: XF-65, H302, H421 and H330
From left to right: XF-65, H302, H421 and H330
Assembling
Assembling
First colors on the figure
Bottom structure assembled
Bottom structure assembled
Bottom structure assembled
Bottom structure assembled
Found out I assembled the wrong rear part… 🙁
…removed parts…
…and this is the correct rear for the Marina!
Work so far
Figure is painted (uffff)
Figure is painted (uffff)
Priming with Mr Surfacer 1500 Black
Primer applied
Green (Tamiya XF-65) applied - tried to use the black primer as a way to produce fake shadows... not sure it worked... 🙂
Wheels ready
First paint applied
First paint applied
Correct tracks arrived
This is painfully slow; for EACH LINK I have to drill all holes (4x) clean edges with a file and then force them with the next one; even after this I break a lot of pins when pushing them… I hope I have enough…
Miniart decals applied (the kit ones are completely inaccurate)
Tracks ready, burnishing
Pin wash with A.MIG-1608
Tamiya Flat Brown applied to the resin pins (left), which were not darkened by the AK solution (right)
Chipping with Ammo A.MIG-044
Chipping with Ammo A.MIG-044
“Cleaning” the inside of the track with a 8B pencil
Painting the teeth with gun metal
Putting the tracks in place - removed an additional 2 links from each side
Details of the tank
Details of the tank
Detail of a crate from the MAIM set
Preparing the additional parts for the scene
Finished model, will now add the stowage, complements and small base
Finished model, will now add the stowage, complements and small base
Quality of the printed MAIM chair is not good
Quality of the printed MAIM chair is not good
Macone base almost ready to go
Finished!
Komentáře
35 5 July 2021, 16:04
Moritz Fentzahn
Count me in, I am planing to do the same tank and figure. ?
Thx for your hint about the wheels. If you want the tank close to the original, you'll have to look for aftermarket decals. The heraldry from Takom is inverted.
Looking forward for your further progress
Count me in, I am planing to do the same tank and figure. ?
Thx for your hint about the wheels. If you want the tank close to the original, you'll have to look for aftermarket decals. The heraldry from Takom is inverted.
Looking forward for your further progress
7 July 2021, 18:24
Ricardo Reis
Welcome. I didn't about about errors in the decals. What is the "heraldry"?
Welcome. I didn't about about errors in the decals. What is the "heraldry"?
7 July 2021, 18:37
Moritz Fentzahn
The white red checkerboard badge. The Takom decal starts with the wrong color
The white red checkerboard badge. The Takom decal starts with the wrong color
7 July 2021, 19:10
Ricardo Reis
I've been reading the build of Andy Moore in "The Modelling News" and apparently he assembled the wheels as per instructions and painted them... and it seems to work well! Article here, with the photos in the bottom showing the wheels with the rim: themodellingnews.com..hes-takoms-35th.html
I've been reading the build of Andy Moore in "The Modelling News" and apparently he assembled the wheels as per instructions and painted them... and it seems to work well! Article here, with the photos in the bottom showing the wheels with the rim: themodellingnews.com..hes-takoms-35th.html
8 July 2021, 17:37
Ricardo Reis
Olá Nelson. Nestes estou a usar Slow Dry Cyanoacrylate da Ammo porque as zonas de colagem têm que ficar muito limpas (migjimenez.com/en/au..y-cyanoacrylate.html). Quando posso "sujar" um pouco mais, prefiro usar a Ultra Glue, também da Ammo, porque dá muito mais tempo e limpa-se com água (migjimenez.com/en/au..1935-ultra-glue.html).
Olá Nelson. Nestes estou a usar Slow Dry Cyanoacrylate da Ammo porque as zonas de colagem têm que ficar muito limpas (migjimenez.com/en/au..y-cyanoacrylate.html). Quando posso "sujar" um pouco mais, prefiro usar a Ultra Glue, também da Ammo, porque dá muito mais tempo e limpa-se com água (migjimenez.com/en/au..1935-ultra-glue.html).
24 July 2021, 11:20
Ricardo Reis
Model is finished, moving now to the base (and figure) that will make up a small scene
Model is finished, moving now to the base (and figure) that will make up a small scene
23 November 2021, 09:22
Ricardo Reis
Thank you @Konrad, it'll be simples, just a figure and a chair with some bottles... maybe a concrete barrier... 🙂 😛
Thank you @Konrad, it'll be simples, just a figure and a chair with some bottles... maybe a concrete barrier... 🙂 😛
23 November 2021, 13:12
Ricardo Reis
Thanks mates - also contemplating toning down the blue "Marina" letter... not sure... I like them as they are, but sometimes I look at the pics from the real tank and I'm not sure...
Thanks mates - also contemplating toning down the blue "Marina" letter... not sure... I like them as they are, but sometimes I look at the pics from the real tank and I'm not sure...
23 November 2021, 14:56
Ricardo Reis
Thank you @James; @Konrad, I'll set it aside and decide when I integrate it in the base
Thank you @James; @Konrad, I'll set it aside and decide when I integrate it in the base
23 November 2021, 20:15
Ricardo Reis
Finished; separate albums with the final photos here T-55A "Marina" - no base | Album by RReis (1:35) and here T-55A "Marina" - with base | Album by RReis (1:35)
Finished; separate albums with the final photos here T-55A "Marina" - no base | Album by RReis (1:35) and here T-55A "Marina" - with base | Album by RReis (1:35)
28 November 2021, 17:10
Album info
This simple build of an out-of-the-box model turned out to be a surprise because of several incorrections in the Takom kit. I later found out that most of the things in the instructions are not to be assembled, and careful study of the existing photographs of Marina is required. The wheels are also very poorly done. The decals and the paiting instructions are plainly wrong. I had to follow Miniart's kit instructions and use their decals, which I was fortunate to be able to source from a friend. Finished photos without the base can be found here: T-55A "Marina" - no base | Album by RReis (1:35); with the base, here: T-55A "Marina" - with base | Album by RReis (1:35)