Zeď
Wall
Michael Kohlpřidal nové fotoalbum.
35 obrázky
Two polish aerobatic TS-11 Iskras
1:72
Finally both pilots are strapped in. Time to tackle the canopies.
Projekt: PZL TS-11 Iskra aerobatic team
All comments (37) » 54 7 December 2022, 10:54
Spanjaardyou need to upload the picture somewhere (share images website, scalemare album....), and then copy and paste link to that location in your post. you can not of course use a link to your local file
2 November, 22:39
November 1, 2024
Michael Kohlpřidal nové fotoalbum.
All comments (74) » 110 12 October 2021, 23:10
Michael KohlThis is a beautiful kit cast in immaculate resin with nice photoetch parts.
Thank you Snake Models for this special one.
Below I list a few things that caught my attention during the build. Maybe it will make assembly of the model even more enjoyable for others.
Kit and instructions contain some mistakes, some omissions and some queer stuff.
- Parts 7d and 13c were missing in my kit
- the wheels (part 1) actually consist of three parts
- part 6D is already cast onto the engine
- part 23 actually consist of two parts
- the exact location of the PE parts in step A is unclear
- in step A you need three pieces of PE2. The fret gives you alltogether 8 pieces designated PE2. Point is only: two of them have different shapes. Those two resemble the ones in the drawing. Only that the drawing is wrong. You need three of the six with the short lever. Then it works.
- some PE parts are labeled "L" and "R" in the instructions. There is no corresponding lettering on the fret.
- two PE parts designated 43 have different dimensions.
- in step B four PE pieces are labeled PE25 although two have different shapes
- PE31 is not labeled on the fret
- right side gear. PE57 exists in two shapes.
- there are no designated positions for quite a lot of the PE discs, although I feel, they are needed.
- Part 61 is redundant.
For Decals No 5 (two different shapes under the same number), 8, 9 and 10 no locations are indicated in the instructions. Neither did I see any of them in my references on the real vehicle .
Советский Зерноуборочный комбайн СК5 "НИВА" Soviet Combine Harvester SK5 "NIVA"
Snake Model 1:72
SM72010 2021 Nová forma 1 November, 10:35
October 25, 2024
Michael Kohlpřidal nové fotoalbum.
28 obrázky
Interflug Iljushin IL-62M
1:144
Colored the steel leading edges first.
Projekt: Interflug Iljushin IL-62
3+All comments (32) » 23 30 July, 07:20
Łukasz GlińskiI think there might also be a difference between these old Alclads and the 2nd generation (not mentioning the MiG rebottlings). I have a sample of each and the older it is the more agressive it seems.
25 October, 19:14
Michael KohlIn my case the two shades mentioned were aquired last.
I was pondering to do the metallic parts first or last. I think masking is easier this way. Let's see how it further progresses. I actually was highly motivated to go for the grey but had then to realise that a bit of detail stuff is required first.
Thanks guys for your input.
25 October, 20:33
October 21, 2024
Michael Kohlpřidal nové fotoalbum.
All comments (15) » 49 10 October, 15:41
Michael KohlSooo. All the touch ups done, the small wheel well doors glued into place a third time and the Sparrows (?) attached with blue tack only as I consider to display the bird as seen on display in Mikasa any time in the future. And if so, it will be depicted without the rockets. And of course some final shots are mandatory.
21 October, 13:56
October 12, 2024
October 10, 2024
August 28, 2024
August 24, 2024
Michael Kohlpřidal nové fotoalbum.
23 obrázky
Mercedes Unimog S404 Ambulance ICM 1:35
1:35
Now ready for the last details to be added
Projekt: Mercedes Unimog S404 Ambulance
2+ 7 9 August, 11:36
Michael KohlWelcome Villiers de Vos. I love the Unimog and will build this one pretty much out of the box. The ICM kit is really nice but should be build withe care as tolerances are tight and malalignments are punished down the road.
24 August, 16:59
August 20, 2024
Michael KohlI am very disappointed by this product. Yes it is finer than the kit parts but it is far from clear. The suppose to be transparent areas are almost opaque and show heavy print lines. To achieve an improvement over the kits parts you will need to cut out the frame and put clear foil into it. This will be a major endeavour due the the fragility of the frame.
Not recommended.
Unimog S404 cabin side windows
FC Model Trend 1:35
37124 20 August, 07:31
August 9, 2024
July 30, 2024
July 7, 2024
Michael Kohloznačil tuto položku jako obchodovatelnou / prodejnou
Cena zatím není k dispozici
7 July, 20:04
June 26, 2024
Michael Kohlpřidal nové fotoalbum.
39 obrázky
Designed to kill - converted to save: Cal Fire's North American Rockwell OV-10A Bronco
1:72
And the seven antennae of the belly. The pitot tube from Master was installed too. Now I gotta handle that bird with care.
Projekt: Designed to kill, converted to save.
2+All comments (22) » 52 24 October 2023, 19:06
May 30, 2024
Michael Kohlpřidal nový projekt.
9 8 November 2021, 00:25
Michael KohlThanks Phenix. Despite it's shortcomings and flaws I still like it a lot too.
30 May, 10:52
May 4, 2024
April 28, 2024
April 23, 2024
April 21, 2024
April 17, 2024
Michael Kohlpřidal nové fotoalbum.
35 obrázky
Velorex 
1:72
As usual not perfect but bottomline I am quite happy with the result.
Projekt: Velorex
2+All comments (30) » 62 15 December 2023, 17:41
April 16, 2024
Michael Kohlpřidal nové fotoalbum.
133 obrázky
Bugatti P-100 Racer
1:72
A word or two concerning the shades of blue. A lot of people- me included - would have expected a french Bugatti to appe...
Projekt: Bugatti P-100 Racer
17+All comments (136) » 170 9 February 2023, 19:55
Michael KohlThank you so much guys for your more than positive feedback and the high praise. A great pleasure to read!
16 April, 11:06
April 13, 2024
Michael Kohloznačil tuto položku jako obchodovatelnou / prodejnou
Corner Paint Stand for 36mm Glasses
HobbyZone
S1NB Prodáno
13 April, 21:27
Michael Kohloznačil tuto položku jako obchodovatelnou / prodejnou
Paint Stand large for 36mm Glasses
HobbyZone
S2B Prodáno
13 April, 21:27
Michael Kohloznačil tuto položku jako obchodovatelnou / prodejnou
Corner Paint Stand large for 36mm Glasses
HobbyZone
S2NB Prodáno
13 April, 21:27
April 1, 2024
March 25, 2024
Michael Kohloznačil tuto položku jako obchodovatelnou / prodejnou
P-51D Mustang corrected propeller for Academy/Hasegawa/Tamiya
CMK (Czech Master Kits) 1:72
Q72120 2010 Nová forma 25 March, 15:05
Michael Kohloznačil tuto položku jako obchodovatelnou / prodejnou
Tank Transporter SLT 50-3 'Elefant' & SaAnh. 52t & Panzerhaubitze 2000 & Recon Vehicle Fennek
Revell 1:72
03204 2010 Nové obtisky Multitéma (3)Prodáno
25 March, 14:59
Michael Kohloznačil tuto položku jako obchodovatelnou / prodejnou
Kfir C2/C7 exhaust nozzles
ResKit 1:72RSU72-0095
ResKit 1:7225 March, 14:50
Michael Kohloznačil tuto položku jako obchodovatelnou / prodejnou
Mirage IIIC Late - Atar 9B Engine Nozzle
CMK (Czech Master Kits) 1:72
Q72408 25 March, 14:43
Michael Kohloznačil tuto položku jako obchodovatelnou / prodejnou
Cena zatím není k dispozici
25 March, 14:39
Michael Kohloznačil tuto položku jako obchodovatelnou / prodejnou
SAAB Viggen - Ejection Seat
CMK (Czech Master Kits) 1:72
Q72346 25 March, 14:38
Michael Kohloznačil tuto položku jako obchodovatelnou / prodejnou
SK-37/SK-37E Viggen Instructor/Operator (Seated in Rear Cockpit) and Pilot Climbing Ladder Into (for Special Hobby)
CMK (Czech Master Kits) 1:72
F72352 2019 Nová forma 25 March, 14:34
March 21, 2024
Michael Kohlpřidal nové fotoalbum.
All comments (68) » 83 19 May 2023, 20:53
February 28, 2024
February 19, 2024
February 18, 2024
Michael Kohloznačil tuto položku jako obchodovatelnou / prodejnou
F-15 Eagle Crew
PlusModel 1:48
AL4013 Prodáno
18 February, 22:47
Michael Kohloznačil tuto položku jako obchodovatelnou / prodejnou
McDonnell Douglas
F-15E Strike Eagle - Ejection Seats w/ Safety Belts for Revell Quickboost 1:48
QB 48 175 2013 Nová forma 18 February, 22:40
January 26, 2024
Michael Kohlpřidal nové fotoalbum.
20 obrázky
Seenotrettungskreuzer Theodor Heuss von Artmaster in 1:87 (SAR Boat)
Hi mates. I'd like to give you a glimpse on a kit I recently purchased. I wanted to build a decent german SAR boat in sc...
All comments (6) » 10 3 March 2023, 10:51
Michael KohlYeah, this Graupner boat - or better to say: pictures of it - will have to serve me when I carve the front part of the hull. The idea is to place the boat in heavy sea and in that scenario parts of the bow will be seen.
25 January, 23:30
January 20, 2024
January 14, 2024
Michael Kohlpřidal nové fotoalbum.
53 obrázky
Kfir
1:72
Paint job is not perfect (as expected) but should form a decent base after some touch ups.
Projekt: Kfir
3+All comments (24) » 42 23 October 2023, 16:21
Michael KohlRobert, you are welcome any time. Thanks Jos and all the other mates for sneeking in and leaving a like.
I touched up the three tone camo but the Mr. Hobby Color paints did not behave nicely when brushed. So even even after the repair I've been unhappy with the result. I sanded the thick paint layer with a high grit, masked the dark brown color another time and airbrushed the defective areas. Not perfect but much better. Now onto the last detail paintings.
19 December 2023, 13:00
December 22, 2023
December 15, 2023
November 26, 2023
wnolder.php?lang=cs
2023-11-26 11:16:58
2020-12-28 06:22:08
86785
/ajax/wnolder.php?lang=cs&sd=2023-11-26 11:16:58&md=2020-12-28 06:22:08&filter=&w=86785
todo