40ft Container
Trumpeter | Nr. 01030 | 1:35
Fakten
- Marke:
- Trumpeter
- Titel:
- 40ft Container
- Nummer:
- 01030
- Maßstab:
- 1:35
- Typ:
- Detaillierungs Set
- Erschienen:
- 2016 Neue Bausatzform
- Barcode:
- 9580208010304 (EAN)
- Verpackung:
- Feste Box (Stülpschachtel)
- Thema:
- ISO-Container » Behälter (Zubehör)
Inhalt der Box
Spritzgußrahmen
Maße:
390x195x35 mm
(15.4x7.7x1.4 inch)
Gewicht:
410 g (0.9 lbs)
Boxart entworfen von Vincenzo Auletta
Bauanleitung
Herunterladen 6238Kb (.pdf)
Marktplatz
Onlineshops
USD 26.62
Auf Lager »USD 31.79
Auf Lager »USD 39.99
Auf Lager »USD 27.08
Verfügbar »€ 22.64
USD 25.99Auf Lager »€ 25.95
USD 29.79Auf Lager »Alle Angebote anzeigen » (12 im Total)
Alternative SKUs für Trumpeter 01030:
TRU01030 | TRP1030 | TSM1030 | TRUM01030 | TRU1030 | 9580208010304
Hinweis: Preise und Verfügbarkeit sind nur Richtwerte. Überprüfen Sie auch, ob das Produkt tatsächlich passt!
Bausatzvorstellungen
Externe Bewertungen
Werbung
Rezension florymodels
Kommentare
AndrewG
The instructions for this kit from Trumpeter are wrong. It's a minor detail, but if you look at the real thing you will see the error. The step two part 4's are mirrored for each door, in fact they both go the same way for each door, the big lug towards the center for each part 4. This means that parts A12 and A13 are also wrong, you have to cut the plate that the handle connects to off and glue it on the opposite side then rotate the part 180 degrees so that both A10 and A12 are the same on the left door and A11 and A13 are the same on the right door. Other than that it is a great kit that fits together well. The 20' kit and the containers that come with the M915 Truck and the HEMTT M1120 are the same so I'll put this comment on those pages too.
The instructions for this kit from Trumpeter are wrong. It's a minor detail, but if you look at the real thing you will see the error. The step two part 4's are mirrored for each door, in fact they both go the same way for each door, the big lug towards the center for each part 4. This means that parts A12 and A13 are also wrong, you have to cut the plate that the handle connects to off and glue it on the opposite side then rotate the part 180 degrees so that both A10 and A12 are the same on the left door and A11 and A13 are the same on the right door. Other than that it is a great kit that fits together well. The 20' kit and the containers that come with the M915 Truck and the HEMTT M1120 are the same so I'll put this comment on those pages too.
1 27 May 2021, 04:49