Newsfeed

gorby
Wow this is going to be a biggie.

Spanjaard
very interesting, no doubt.

bughunter
Another big (and heavy 😉 ) beauty - I'm in!

bughunter
Working electric window lifters 👍 On a model? 😮 Never seen that!

Alexander Grivonev
Following!

Roger Trewenack
the window are manually lifted, sorry - you lift up the gull-wing door, and that reveals the bottom cog which you can wind with your finger

CaptGPF
Does that window also roll up and down?! That's truly sick! Watching!

Alex Rakhimgulov
What kind of oil will you use? 😮

Roger Trewenack
thet'd be....... "the good oil"!!! !;^)

Guy Rump
Lovely job! 👍

Mr James
Oh yes indeed. Lovely mottling spray job and great scratches and wear around the frame.

Doubtingmango
Beautiful work!

Gary Victory
Very nice build and paint work Richard. Love the mottling. Top job Sir.

Erik De Smet
That kit is older than you, Greg...

Robert Podkoński
Taking a seat!

Alex K
Joining the audience.

Finn
Once again joining (of course)

Greg Baker
This one is likely to be a quick little build. It's basically the companion piece to the Puss Moth, so I felt like I couldn't really build one without the other. Erik is right though, the kit is of an impressive vintage. It is indeed a few years older than I am, and has the flash to prove it. 🙂

Anyway, thanks for joining, there's plenty of seats available, so no shoving. 😉

Nicolas
Looks like fun. joining.

Greg Baker
You say that now... but wait till you see how much putty and sanding is required~

Alex K
Hmmm hmmm hmmm... So, is it a Demon or a Hart? And what about that rear cockpit?

Greg Baker
Well, it's supposed to be a Hawker Hart apparently... but the Hawker Demon is close enough... I mean, it's not like it's a Spitfire. 😉

Alex K
Good enough for me - I'm arguably one of the least rivet-counting persons in here... just asking/checking... 😉

Ben M
👀

Matthew A
And only a masochist with ADHD would consider trying to convert it back to a Hart like the original 1957 tool... 🤪

Greg Baker
What did you call me? 😉

I mean, besides the dip between the two cockpits... are there any other differences? They look quite similar to me...

Alex K
Well, the "dip between the two cockpits" is the main difference I was referring to above... Plus, you'll have to skip the Demon's long exhausts, I guess...

Cuajete
Following!

Łukasz Gliński
Me 2

Lode Schildermans
In for tais New Tintin adventure

Greg Baker
Not exactly sure what picture to take to update my progress… I'm working on bits of everything all at once!

Matthew A
The main difference between a Demon and a Hart is the exhausts, the turret and the starboard machine gun. Will send a PM

Alex K
IF however (regardless of how a real Hart should be) what is shown in the comic ("That's what I call" etc frame) is indeed a starboard mg (please correct me if I'm wrong...) then starting with a Demon kit was perhaps indeed a better idea than starting with a Hart kit.... IF this is the case... then you'll only have to deal with the rear seat/turret thing and the free (ala Fury) exhausts, no?

Greg Baker
Yeah. I think so. Matthew provided some detailed comparison images but after looking at them and at the main page from the album... it seems to be a little bit of both...

Matthew A
The 1930s version
i.imgur.com/CrTThem.jpeg

bughunter
I see "Seven at one stroke" projects on your bench 👍 Please keep them coming!

Matthew A
In Tintin in the Land of the Black Gold it could be a Hawker Hardy
i.imgur.com/57c2RcA.jpeg

Greg Baker
That's the original "leaflet dumping" aeroplane. Nice find!

Greg Baker
Made a bit of progress on this one. 🙂

Greg Baker
A couple of updates. The supports next to the fuselage were so weak that 3/4 of them snapped even before I got them off the sprue. So instead I just used some bent wire. The holes they are meant to slot into were gaping caverns as well, so a fair amount of putty was needed to make it at least slightly better. Now I'm left with a decision to make. The Hawker Demon has two large exhaust tubes that run from the engine down the sides. They're not present in the Tintin album (which most closely resembles a Hawker Heart I believe). So... do I leave the two side holes and the large trenches on either side of the engine cowling, or do I just shrug my shoulders and use the parts that came in the box?

The Blue Rider decals went on easily enough. They're a bit shiny, but I think I can deal with that.

Matthew A
Looking joly good

Greg Baker
Thanks Matthew. I'm quite pleased with how the colouring came out too. A 2:1 ratio of Tamiya Buff (XF-57) and Khaki (XF-49) seems to have done the trick... or at least close enough for me.

Cuajete
Painting color looks so good 👍

Greg Baker
Decided to include the exhausts. It looks odd without them…

M0rce
Hi all.
I have a video about my progress on this kit on YouTube of you are interested.
Youtube Video
Thanks

Ben M
Taking a seat

M0rce
Welcome.
Want a 🍺?

Tim
Great

nikfrost
Looking good. What options do you get for the trawlers name?

M0rce
Hi nikfrost.
Just 1, Ross Jackal.
But as I have deviated on the colour scheme, I may make one up. Hoping to find some rub on letters at the hobby shop.
Any name suggestions? (Question open to all of course 🙂 )
Have a good day.

Ben M
Bob Ross

nikfrost
Thanks M0rce. I live near the Humber Estuary which is connected to the North Sea, my suggestion would be Mud Shark haha.

CaptGPF
Love the realistic rust effects dotted about the ship!

M0rce
Hi everybody,
Thanks for your comments and ship name suggestions
I didn't manage to find any rub on letters at the hobbyshop, but got a few sheets of single.letter decals...
Not sure haw that's going to work. Got to.pravtice that a bit before I attempt on the model.
Keep ship name suggestions coming.

Ben M
Boaty McBoatface

M0rce
I prefer your first suggestion, Ben. 😀

M0rce
Hi everybody,.
New update video on youtube.
Youtube Video
You input would be apprecisted.

M0rce
Erm.... just found this build yesterday... I need to up my game on this build.
modellversium.de/gal..s-cougar-revell.html

Ben M
Release the kraken!

Mojo DeVirus
Nice. Very nice.

Rolf Rolf
Howabout Ireland's finest or something like that

M0rce
Hi Rolf Rolf. It will be considered. Thanks. 👍

M0rce
Thanks Mojo. 😊

M0rce
Good video footage of vessels like this here
Youtube Video

Tcamp
Beautiful job

M0rce
Hi Tcamp.
Are you my youtube buddy?
Show your work.pleaee, I'd love to see it. 😀

Tcamp
Love watching builds

M0rce
Hi all.
Latest update here
Youtube Video

Gary Victory
Now that's a blast from the past..!! I Remember building this back in the 80's.... I hope you enjoyed building this Ian. Nice work.

Steffen
Hallo Thomas, ja, die sind noch da!
Hättest du sonst noch an etwas aus meinem Stash Interesse?
Gruß, Steffen

Thomas Neuss
Hi - die beiden Sachen sind dann alles. Ich komme mir selber etwas dämlich vor, dass ich das übersehen habe, als ich die Mosquito angefragt habe... seufz. Jetzt bin ich alles durchgegangen. Viele Grüße, Thomas

Steffen
Hi Thomas, damit ich das Porto bestimmen kann, muss ich wissen, wo du wohnst. Wäre PayPal ok? Gruß, Steffen

Thomas Neuss
Hallo,
der Versand wäre in Deutschland, hier schon mal meine Adresse:
Thomas Neuss
Wilhelm-Leuschner-Weg 5
25524 Itzehoe
PayPal (Freunde) ist völlig ok für mich.
Viele gRüße
Thomas

Rando
Gonna shift gears with a more straightforward Tamiya build. I wanted to make the all-black night fighter option, but thought the color scheme was too simple and I also wanted to try some camo painting. So I got decals for a night intruder option, which is the best of both worlds, and the camo with black underneath just looks really cool.

J35J
Mossie! I'm in👍🏻

Markus Antonius
There is nothing more complicated, to replicate a all-black aircraft not making it look too dull, in my opinion

Ludvík Kružík
Interesting choice. Both when choosing a machine and when choosing a kit manufacturer. Compared to the Crusader, we go back in time by choosing the aircraft, but it's a big step forward in kit quality.
I wish you a lot of fun and as little trouble as possible building this kit. And of course I will be happy to follow it 👀

Jennifer Franklin
Following 👀, 'm excited to see how this turns out.

Rando
Welcome friends! Yes Ludvik this is a "palate cleanser," I wanted to see how a nice Tamiya goes together, it's also the second kit I got so it's been sitting in my stash awhile. I'm already messing with ejector pin marks, we'll see how much trouble I create for myself 🙂 and Markus--yeah I figured the topside camo would add a lot more visual interest.

Desert Marlin
And so it begins!!! You have earned the right for a break from raised panel lines!!!

Rando
🤣 I guess I have! The Monogram Voodoo lurks around the corner. The Mosquito's fit sure is mostly nice so far

Rando
Wings and nacelles are glued together and been painting the many cockpit components. Drilled out the gun barrels on the .303 Brownings too, I like the look

Markus Antonius
Is that Tom Servo in you profile picture, btw? 😄

Rando
Oh yeah! Been an MST nerd since forever

Rando
Did some detail painting, and been pounding the instrument panel decal with micro sol. It's slowly conforming to the raised dials, but I have solvaset and mark softer on order since Tamiya decals are apparently known for this…

Gerald
👍

Rando
I improved the cartoony decal seatbelts by applying them to foil, cutting them out, and painting the black edges a similar color. Idea thanks to an old IPMS Stockholm article.

Desert Marlin
I have the FB and NF versions… I need to finish my P-8 and get started on a Mossy…

Desert Marlin
The belts look great!!!

Rando
Thanks Marlin! Definitely my favorite part of the build so far. Actually just threw the whole thing together today, now that the cockpit has been all worked out. It's not exactly intentional, but because this NF version I chose doesn't have the radar features, I've been breezing through construction since it also doesn't use the FB rockets/bombs/bomb bay. Next I need to get the canopy on ASAP since I keep breaking off gunsight 🤬 the only construction left is the landing gear, props, and the crew hatch and boarding ladder. Looking forward to painting

Guy Rump
Looking good, following. 👍

Ludvík Kružík
Excellent work on the model. Looks great. 👍

I'm sure you're not the only one who breaks off small parts of the model. I have the same problem. All it takes is one very brief moment of inattention and one careless move and that's it. Although I try to handle the model as carefully as possible, for example, I have broken off the antenna on the bottom of the Gripen four times. 😭

Aman S.
Following...looks great

Rando
Thank you all, and glad to have you here Guy and Aman! No more breaking off the gunsight for me now Ludvik, the green strip decals are on the inside of the canopy and masks are on. Just gotta mask off the guns and then it's time for surfacer

Desert Marlin
Nice! I just finished the cockpit on the P-8 so, I really appreciate this step you have accomplished!!! Cheers!

Rando
Guess I'm onto the painting phase! I already painted the propeller caps ocean grey, then decided to hit the bottom side with matte black. Also getting the undercarriage painted and assembled too.

Desert Marlin
Love this stage! Looks great!!!

Rando
Thanks Marlin! I got it ready to paint the dark green. IDK what others do for camo like this, but to make a "hard edge" camo I used Tamiya curved tape to make the lines, and then used regular masking tape and paper towels to mask off the rest. Excited to see the finished paint job

Neil
It's looking good Rando! 👍

Rando
Thank you Neil! At first I was thinking the ocean grey looked too dark, but with the dark green I find it contrasts well. Just got to fix some overspray and touch up some areas and it's on to decals

Desert Marlin
Excellent work! The scheme is coming along nicely!!!

Rando
Decals are on with a gloss coat over them…maybe some weathering today?!

Desert Marlin
Oh yes!!! Great Saturdays provide the opportunity to focus on all those little details seen in the mind's eye!

Rando
Hell yes Marlin especially a rainy one like this! Working on the landing gear while giving the gloss time to cure

Jos Jansen
Iam in Rando.

Rando
Hell yeah bro! Finish line is near!

Desert Marlin
The MLG look great! Where are you that it is raining?

Ludvík Kružík
Marlin, it looks like Rando was visiting the Czech Republic today. It's been raining here all afternoon 😄

Rando, that chassis looks fantastic. Didn't you put pictures of the real chassis here by any chance 🙂

Desert Marlin
😆👍

Rando
If only Ludvik, I'd love to come out that way. Would have come by to say hello and see your workbench! Been a pretty nasty day here in eastern Massachusetts too. Was also a good day to bring the kids to a model train show, fun look at an adjacent hobby.

Here's hoping the chassis fit into the nacelles without too many swear words 😉

Desert Marlin
I spent the day painting here in Nevada.

Ludvík Kružík
Rando, I believe it would be a pleasant meeting. I'm sure we'd have a lot to talk about. And of course I would love to show you my desk 🙂

Rando
Indeed Ludvik we sure would, I'd be thrilled to meet you Marlin and all my modeling friends on here someday.

Mosquito is like 99% done! Landing gear went in surprisingly easy and now just some wingtip lights to install, finish painting the crew hatch, and attempt to rig the antenna mast. Pics soon!

Definitely looking forward to seeing painted the P-8 Marlin!

Desert Marlin
I'm starting gloss for markings…

Rando
So I have to say I'm disappointed with how the canopy looks. I used Eduard masks and they were a struggle to get on as they didn't fit great. In hindsight I should probably de-tacked them too, like I do with Tamiya tape, since it seems like they left adhesive residue. They left some rough paint edges. Not sure how to improve it, I've done some careful scraping with toothpicks and Leveling Thinner, which improved it some, but considering popping the whole thing off and repainting it.

Desert Marlin
Using a 000 brush, put a couple of coats of thinned out black along the bottom of the canopy glass then a similar thinned coat of color over the black. That would firm up the window frames. The rest of the frames look pretty good to me!

Rando
Thanks Marlin, so would that help with that weird splotchy white color, especially noticeable on the frames in back?

Desert Marlin
Those should be dressed with a thinner brushed on in very small quantities until the streaks relent. I had thought those were aluminum chipping which would also be valid!

Desert Marlin
The Mr. Color Leveling thinner with a stiff hobby swab would help clean the edges. The Mr. Color thinner doesn't seem to harm clear plastic…

Rando
LOL, amazing that my mistake looked like something good! Shoulda just rolled with it. I do have a stiff kind of swab, I'll give it a try

Rando
I actually got Leveling Thinner after you recommended it on my Crusader build and it's all I've been using lately. Good stuff, I like that it can leave a smoother finish

Ludvík Kružík
I can confirm. I have the same experience, Mr. Color Leveling thinner will not damage clear plastic.

Rando
I think I've improved the framing a good deal already, both with paint and the thinner. Now just gotta glue on some nylon thread for the mast rigging, which I've never done before. So far I managed to attach it to the mast with some gel super glue.

John
Get some EZ Line, you won't regret it. Nice Mossie too! 👍

Rando
Hey cool, how do you attach it John? And thanks getting close to final pics!

John
You use super glue, it just stretches nicely without putting a lot of pressure (i.e. bending) on antenna masts. So you can anchor one point and then stretch it easily so there is no sag when you attach the other end.

Rando
Got it! I'll order some. I've already had trouble with the mast popping off once.

John
The antenna on my Buffalo build is EZ Line, it's also handy for those annoying multi-wire antennas.

Rando
I see did you use thick or fine?

John
Definitely get the fine size. 👍

Rando
Basically done! Aside from the rigging wire, which I will attach when it gets in. After that I'll upload the beauty shots. Now to clean up my very messy workbench and get the next project going!

Desert Marlin
Bravo! 👏

Rando
So I decided to finally upload the glamor shots for this Mosquito. These were taken months ago but I was dissatisfied with how the photos looked at the time since it was difficult getting the plane to fit in the frame without ugly background. Looking closer though, I thought they actually turned out fine, and pretty nice actually with some cropping and brightening adjustments. So belatedly, here she is completed, the Mosquito night intruder. Great kit, most difficulties I had were my own doing. Eduard masks are not their best. Eagle Strike decals are great. If you have this one in your stash, pick out a cool scheme and build it!

J35J
Your Mossie turned out great! Congrats!👍🏻

John
Hey Rando, I can only repeat previous comment, nice Mossie! I think the canopy looks fine. I'd probably do a masking like this myself for the reasons you ran into. I don't like the "put the tape on the canopy then carefully trim the frames" technique because a mistake can be disastrous, but in this case since most of the frames are straight and well defined, I think I'll do that for this one instead of my usual cutting and taping dozens of little pieces of Tamiya tape to the canopy, which also works, but is time consuming. I did get this kit after seeing your build and I plan to do the NE D bird, I just like the scheme. Looks like the EZ line worked out really well for your antennas. 👍

Rando
Thanks John and Draken! Yeah I kind of gravitate towards cutting directly on the canopy for some reason, even though it's soooo risky. One thing that might be a good alternative to the Tamiya tape is scotch tape (suggested by Marlin), since I found you can more clearly see the actual place you're cutting into. I did that for some windows on my P-51 build and it worked out pretty nice. And also yes--the EZ line was a breeze, thanks for that! For some reason it fought me hard on the aforementioned P-51.

Shameless plug for my F-8 double build, putting the decals on tonight. So excited!

John
Wow, you really like your Crusaders! (I mean, who wouldn't?)

Rando
yeah it's ridiculous LOL. I'll be building other planes, I promise! At least after I try CAT4's new early nose conversion.

Desert Marlin
That looks perfect Rando!!!

Ludvík Kružík
Mosquito turned out very well. You did a really good job. 👍 👍 👍

Rando
Thank you Marlin and Ludvik! Who doesn't love a Mosquito? I sure do like the look of it on my desk at work.

Doubtingmango
Pretty skeeter

Jennifer Franklin
Mosquito is very nice. I can imagine that it looks good on your desk at work.

Guy Rump
Great job! 👍

Neuling
Clean and careful work! 👍

Rando
Thank you all!

Jennifer Franklin
She is a beauty. You attention to detail is exceptional.

Gary Victory
Really nice build and finish Rando.