Newsfeed

Jan Janssen
Unusual subject wonder how it builds up, #following

Mr D
Thanks Jan 👍will update through build.
It's from the 1990's

Mr D
Thanks for the likes 😁👍 it's interesting to see how a 33 year old kit builds up ??

David R. Meizoso
Beautiful subject, I'm also in!

Guy Rump
Following. 👍

Mr D
Thanks Grumpy Guy 👍👍 bit of a different one..

Skyhiker
Very nice

Ben M
👀

Mr D
Ben👋😀👍

Neil
Really nice work Mr D 💯 Following 👍

Mr D
Great Neil, 👋😀.... Thanks

J35J
Great progress! Following👍🏻

Edouard Carr
Great idea about the watch pins! ⌚ Definitely gonna try this out on my builds. Looking forward to the finished result.

Mr D
Hi Edouard👋😀👍.
Yes l just get cheap ones of eBay, the do different sizes, you can pull ends n spring out for barrel look, or file ends last to have a recoil cannon look.
The gun turret nearly there now....lots of sanding n filling low spot.
Thanks for looking in on build.👍👍

Michael Kohl
Following

Mr D
Thanks Michael 👋😀👍
Good to have you along ✈️

Zbynek Honzik
I'm very curious to see the result. I built this model as a young boy too.

Mr D
Hi Zbynek 👋🙂👍.
Thanks for your interest. Nice to know you had it too, l built X3 the Tu airliner and the bomber. But this was my favourite as l liked the shape and that it had floats n guns.
Got part of tail on this evening.
Keep looking in for updates 😃👍👍

Mr D
Airliner Was the Tu-134

Guy Rump
Looking good, following. 👍

Mr D
Good to have you along Guy 👋😃.
Bit of fine sanding n tidying to do next then look at getting an engine effect in cowling area.
I replaced side vent for smaller one now, checked photos... and l made it way to big.
Catch you on the next steps.

Mr D
Thanks to Everyone who has liked n taken an interest 👋😃👍.. Appreciate it 👍

Edouard Carr
Hey Mr D whats the Gorilla Glue like? Is it a clear PVA or a resin Super Glue Type? Do you use it just for clear bits or as n all purpose? Thanks in advance E.

Mr D
Hi, it dries 100% clear but is slow.. to air dry ..so leave overnight.
But it's worth it as very strong. And is very neutral on paint and clear parts.
It's almost like an air drying epoxy, not harsh like super glue or poli ...very safe.
I only use it on clear stuff as it's stronger than PVA but not good for general building.. l do use it to fill gaps sometimes.
👍

Mike Montgomery
Don't think I'd trust those decals. The red stars are easy enough to replace or paint on, the bort numbers might be more of a challenge.

Edouard Carr
GG. Now added to my shopping list along with watch pins 😉

gorby
Looks like an interesting build.

Mr D
Hi Edouard 👋..yes 🤣 lm on 12 model with it and never had anything come loose.
Mike👋.... No mention neither! I've purchased some more Soviet stars now, may have some numbers leftover from others project's.
Gorby, Thanks buddy 👍

bughunter
Oh, that is a very old kit. I have built a newer edition. Not sure, if the plastic parts was identical tool. The PE sheet was bigger.

Never a Pro
I know, I have seen your great build. This one will also be a Collinshaw's "black maria" with decals borrowed from a Camel.

I got this one from a guy in Switzerland, with my luck Eduard will retool it after I am done with this and sell it for half the price I paid for this one.

The detail looks acceptable, but I will have to do some improvements (aileron check windows, machine gun, cockpit, etc). The plastic quality is not great, but decals are impeccable.

Meister
Following 👍

Michael Kohl
me too. I have a scale 1:72 for a bigger project in my stash. I am keen on your experiences.

Never a Pro
1:72 Sopwith sounds punishing. I am already on my limits in tolerating tiny PE pieces

TH SCALE MODELS (Thomas Haberl)
Awesome progress so far. Would never be patient enough to do these kind of rigging ... never! How often did something fly around your bench? 😁😁

Never a Pro
I like rigging with EZ line, it is the cherry on top of a beautiful WWI kit

René "Lord Bilbo" Bartholemy
Following too!

Ben M
I've occasionally had luck with painting "microscale liquid decal film" on before using old decals. For the tail you can mask and paint the stripes pretty easily, I'd do the whole tail white and then do the red and blue. In the case where replacement decals cannot be obtained I've had luck scanning them and sending the scan to these folks: stsdecals.com/

I'm also going to try making my own decals for a project soon.

Anyway, as someone who builds old kits, the decal problem is one very familiar to me. Good luck!

Never a Pro
yeah, I can easily paint the tail stripes, but the problem still persists on the roundels. Anyway, thanks for the great tip, you never know when you need custom decals

George Williams
Never seen this before but it looks fabulous.

David Orr
That is very nice. It's good to see an unusual subject like this. I think I had a Matchbox car very similar to that.

Spence Wilson
@George, thanks! Concept car from the late 60s. Always been one of my favorite concepts.

@David, I know Hot Wheels did a version in 1970 and Matchbox did one in 1971. Pretty sure I had the Matchbox version as well at some point.

Alexander Grivonev
You actually managed to order a kit from this website?

Christian W
So cool to see this one build! Great! I love those old prototypes and how they saw the sports car for the future.

Spence Wilson
@Alexander, I have been buying the SMP24 kits for about 4 years now. It was not easy to find or purchase them in the beginning but I have been a pretty consistant purchaser since. I am not sure how many actually get out of Japan or Asia for that matter. Definately not easy or inexspensive to obtain.

@Christian, thanks! I am also a big fan of this era of prototypes, most concepts from the 70s though the 90s I felt really captured what it meant to create really wild and intersting concepts.

Robert Podkoński
Fantastic model of a fantastic car!

Spence Wilson
@Robertt, thanks very much.

Marcel
Great build of a unique car. Love the color.

Mr D
Very nice, great subject too👌
Do you know who the designer was ??

David Orr
@MrD It's got a Bertone logo on the side of the engine cover.

Spence Wilson
@ Marcel, thank you very much!

@Mr. D It was designed by Marcello Gandini while he was with Bertone in 1968.

shadowlight
What can you tell us about the quality of the kit? Sharpness of casting, amount of details, difficulties during building....

Mr D
Thanks Spence😃👍
Thought it had a Gandini look, .. like the stratos ect .
Really nice , ike the window tint.

Spence Wilson
@shadowlight You can watch the full build of the kit on my YouTube channel and see what it consists of. I don't do a lot of resin so I don't have much to compare it to but I find the resin to be a little soft so things like scribing are difficult for me when I am so used to doing it with plastic. The interior is beyond detailed with so many tiny photoetch pieces it is amazing, as it is with many of their kits. The engines in the SMP kits I find are always bitter sweet. They have fantastic detail for the parts that are included but I also feel they are a little simplified and ccould use a few more extra bits to them just to detail them up a little more. All SMP kits come with great photo etch parts and a level of details that is beyond my expectations. Just understand this is a garage kit and more in line with something you may 3d print rather than building a Tamiya or other styrene kit. A lot of the parts can benefit from pins to hold better and you have to decide if you want to go through all that yourself. I love the two SMP kits I have built so far and I have several more of them that I am eager to get into as well. I really enjoy building them.

Mr D
Thanks, will check out the YouTube build, l really like Gandini design's... The Miura is my favourite, but the kits I've seen don't look that great.
Thanks for info..... Appreciate it 😃👍👍

shadowlight
Thanks Spence - will have a look

David Orr
@MrD You wouldn't believe it, but I saw a Lancia Stratos yesterday while driving just outside Pukekohe, New Zealand. I don't know whether it was the real thing or a replica, but it looked fantastic anyway. Not exactly what you expect to see while driving around rural New Zealand.

shadowlight
2 more questions: - which colours did you used? It wasnt mentioned in the video...
- how you have ordered and communicated? Using google translate on their website and using the Mail-form included in their site only japanese letters seemed to be allowed...
An congratulations that you got one of these - there already sold out 😭((

Dominik Weitzer
wow. that looks great!

Mr D
David Orr,
Yes there is a Lancia specialist in NZ, he is one of the world's leading restoration guys and builds Replica ones too with Alfa Buso V6 engine's....so I'm not surprised.
I think the stratos looks like a Miura....shrunk in the wash.... Another Gandini great.
😃👍👍

Rui S
Welcome to scalemates🙂

Gerald Sigmund
Muito obrigado, muito amável da vossa parte.

Cuajete
Well done so far 👍

Rui S
Welcome to scalemates🙂

Rui S
Welcome to scalemates🙂

Rui S
Welcome to scalemates🙂