Newsfeed
Nikita Nikulinhat diesen Artikel gestartet
Petlyakov Pe-2 soviet dive bomber Пе-2 Советский пикирующий бомбардировщик
Zvezda 1:72
7283 2019 Neue Bausatzform 25 July, 10:32
Nikita Nikulinhat diesen Artikel gestartet
Tiger I
Panzerkampfwagen VI Ausf.E Sd.Kfz.181 "Final Version" AFV Club 1:48
AF48001 2006 Neue Verpackung 25 July, 10:32
Rob K.hat ein neues Fotoalbum hinzugefügt.
1 25 July, 08:04
Rob K.Completed a few years ago
1. Primer then lightly sanded smooth with Tamiya 3000 sanding sponge.
2. Coat of Mr Color Ueno black GX2, with a final coat of pure Mr leveling thinner to achieve the high black shine.
3. Few hours after the GX2 applied AK Xtreme polished aluminium (avoiding finger prints/dust etc.)
4. In my opinion it is best to seal the Polished Aluminium with Aquagloss, Gauzy or MRP-gloss as through handling the polished Alu May scuff through the build. (But not necessary). Scuffs can however be repaired with some metal powders like Mig polished aluminium powder.
5. Picked out and masked a few panels with various shades of AK en Alclad.
6. Sealed everything at the time with Mr Color GX 100 gloss. (although I stopped using this on high shine polished aluminium coats to avoid re-activation of the polished aluminium - see also mr Color website for recommendations on metal coats) Nowadays I would seal it with Aquagloss or light coats of MRP gloss.
7. Applied a Flory products waterbased wash of dark brown dirt
That is pretty much the recipe I use for all my NMF subjects, although recently I started using MRP Super Silver and Mr Color super fine/chrome silver II. Hope this answers your question. Rgds, Rob
25 July, 10:30
Nikita Nikulinhat diesen Artikel gestartet
F-4K(FG.1)/M(FGR.2) Phantom-II British stencils NAVY/RAF FFA - removable film
UpRise 1:72
UR72217 2023 Neue Bausatzform 25 July, 10:30
Nikita Nikulinhat diesen Artikel gestartet
F-4K Phantom-II FG.1, British Phantoms Pt.4 no stencils, FFA-removable film
UpRise 1:72
UR72221 2023 Neue Bausatzform 25 July, 10:30
John Hewatwill diesen Artikel
3D printed
Bristol Type 81A "Greek Trainer" / Tourer (Puma engine) Shapeways Scale Exotica 3D 1:48
SE01 25 July, 10:25
Roland Sachsenhoferhat ein neues Fotoalbum hinzugefügt.
17 24 July, 04:57
Roland SachsenhoferYesterday the A.90 Orlyonok thundered in front, here are a couple of pictures of this event! 🙂 I added a few things to the kit, such as the prominent framework in front of the cockpit, which I built "on sight" with suitable wire. I haven't been able to find out what it's for - aerials, windscreen wipers/cleaning? - but I know that it contributes quite prominently to the appearance. I also added the various aerials on the fuselage and engine.
Thanks again for the hint about the 'ironed' water behind and under the engine, that was an important tip and came in time, thanks to Robert!
24 July, 05:06
Robert PodkońskiLooks absolutely perfect, Roland! Chapeau bas! (I am happy that I have contributed a bit to this effect 😉 )
24 July, 05:34
Roland SachsenhoferThank you for your appreciated comments - it is of course very motivating to receive such feedback!
24 July, 18:03
Roland SachsenhoferThank you very much mates! In fact, the A.90 'floats' on two fine metal rods; I apologise for taking the freedom to wipe them away with the image processing.
25 July, 07:58
/de/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=de
35
35
/de/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo