Newsfeed
blazerstevebesitzt diesen Artikel
Exhaust Tips
Lamborghini Aventador LP700-4 for Fujimi Hobby Design 1:24
HD02-0191 20xx Neue Bausatzform 30 August, 14:59
Lee Fogelbesitzt diesen Artikel
M911 C-HET & M747 Heavy Equipment Semi-Trailer (For MENG SS-013)
Voyager Model 1:35
PE35951 2018 Neue Bausatzform 30 August, 14:59
Desert Marlinhat ein neues Fotoalbum hinzugefügt.
26 8 November 2023, 21:10
Desert MarlinThis project will have both pilots on the intercom and watching the engine startup process. That is why the same type figure is used in both cockpits. They both monitor the engine to ensure that the EGT and RPM is increasing appropriately. Each has their hand on the control stick to be able to open their MIC as they confirm everything is normal at start. The plan is to have the aircraft loaded with a Nuke (Apache Cruise Missile?). Seems appropriate to me for the days we live in now...
8 November 2023, 22:16
TreehuggerMaybe go for resin seats as well?
Seems like kit plastic never can compete with resin seats. 🙂
Though, I no longer crave for resin interior for the cockpit because of the work, but seats are ok.
9 November 2023, 05:17
Desert MarlinI'll paint these up and see if I can tolerate them. If they are too bland, I have time to change my mind! Thanks for the idea!
9 November 2023, 21:25
Desert MarlinGreat video of the weapon that goes with this version of the Mirage 2000N
Youtube Video
25 November 2023, 00:46
Desert MarlinAs I have begun work on this kit, I am yet again struck by the lack of information in the variations and options provided in the kit. For example, the tail tip is not called out that applies to the 2000N version. While the nose of the 2000D is provided in the kit, it has to be modified to make it correct for the 2000N. Oh bother…
20 July, 02:40
Desert MarlinSelected "most appropriate" tail tip and mounted the correct nose to fuselage.
21 July, 20:04
Desert MarlinOkay, now I'm excited to get some paint on this cockpit!!! ResKit, you guys have done some great work with your 3D Resin Printing!
16 August, 18:29
TreehuggerOh, did you fiddle with the nose part to make it match the N version, or did you have to buy aftermarket nose for the N version? I have this kit in my stash, but haven't really looked any it yet.
28 August, 05:43
Desert MarlinI'm using the D nose but converting it to an N version. I'm also closing the "sucker doors" on the inlets to represent an engine that is not yet started... I'm assuming initial hydraulic power is applied from the APU and auxiliary hydraulic pumps have brought the gear door up. I'm going to close the speed breaks for pre-engine start configuration...
28 August, 17:36
Eric ThorntonLooks like BAM has some corrected noses still need the N one. Maybe reach out to him. I could use the corrected nose for this kit also. The Reskit stuff looks amazing.
bam-models.com/produ..2000-corrected-nose/
30 August, 13:57
Desert MarlinThanks for the heads up! The BAM nose looks fantastic! Sadly, the 2000N nose has a pitot tube and does not have the RDY antenna lines. It seems that much of the 2000N systems are somewhat earlier than the -5 systems. Everything I can find on the 2000N seems to be somewhat austere compared with the 2000-5. The ResKit cockpit is worth every penny!
30 August, 14:59
Jungclausbesitzt diesen Artikel
TORA TORA TORA! (Zero A6M2 Type 21) Limited Edition / Dual Combo
Eduard 1:48
11155 2021 Neue Bausatzform 30 August, 14:58
Augiewill diesen Artikel
Water Line Series No. 560
Japanese Seaplane Tender KamikawamaruAoshima 1:700
009741 (00974) 2014 Neue Bauteile 30 August, 14:56
Paul Gallagherhat diesen Artikel fertiggestellt
Water Line Series No. 560
Japanese Seaplane Tender KamikawamaruAoshima 1:700
009741 (00974) 2014 Neue Bauteile 30 August, 14:55
Paul Gallagherhat ein neues Fotoalbum hinzugefügt.
26 Bilder
IJN Seaplane Tender Kamikawamaru at Deboyne 1942
1:700
Kamikawa Maru establishing a seaplane base on Deboyne 1942
1 30 August, 13:53
Ed Jankahat ein neues Fotoalbum hinzugefügt.
23 22 July 2022, 15:22
SpanjaardCool!!! i like those pilots too. how did you keep all that together, CA or soldering? it looks so clean!
28 August, 20:55
Lorraine LinWow, like it, especially pic 22, looks like a real titanium frame. Thank you for sharing.
30 August, 06:18
Ed JankaThank you, mates, I am pleased you like it.
Maurizio, the crew was originally a space shuttle crew, created by a Swiss gentleman named Max Grüeter and purchased from Shapeways.
Spanjaard, I used thick and thin UV glue for this project without soldering.
30 August, 13:23
komorasDear partner,
Concerning: 03860 Gloster Meteor F.3 - First Edition
Version has been switched from “Gloster Meteor F.3” to the new “Gloster Meteor F.8/FR.9 F”.
(For the enthusiasts this is a significant change)
As a result we decided to cancel the current backorder for 03860 and introduce the new version under a new item number in early 2025.
Your current backorders for 03860 will be automatically removed from our system. Please make this correction in your system.
With the announcement of the new collection 2025, we’ll be able to provide more information on this new item.
The current 03860 orders will NOT be automatically switched to the new, future reference. Please re-order them when we have the new item number and all needed new information.
30 August, 14:48
Michael Jessenbesitzt diesen Artikel
FAMO & Sd.Ah.116 Schwerer Zugkraftwagen 18t "FAMO" und Tiefladeanhänger für Pz.Kpfw. Sd.Ah.116
Tamiya 1:35
35246 2000 Neue Bauteile Mehrfachthemen (2)30 August, 14:48
Roden 1:144
/de/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=de
35
35
/de/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo