Newsfeed

Nicolas
As soon as I finish one of my 3 current projects (2 of them ar nearly done) I will start with this little helicopter.

Nicolas
The build startet this weekend.

Nicolas
As I am covid positive (fortunately only with very mild syntomas) I had some time to build again today. So far I am positively surprised by the accuracy of fit. There are no locator pins, but I can now click the fuselage and cockpit together and even the tail section holds without glue.

Nicolas
I would like to do some rivets on the exteriour, but I couldn't find some good drawings. If somebody has a hint I would be grateful.

Nicolas
Today I started installing the controls. Doing so I noticed, the collectiv controls are missinh in the kit. So I started scratchbuilding them after photos. Also fabricated and installed blinds for the paxes.

Nicolas
Started some work on the exteriour.

Freak
Interesting project! Love the WIP pics and demo of various detailing techniques.

Nicolas
Hi Freak, welcome on board.

Shar Dipree
I have the same kit too. I'm really looking forward to your results. Following. 🙂

Nicolas
Hi Shar, welcome.

Łukasz Gliński
Cool, will watch. Still afraid to start mine 😄

Nicolas
Welcome Łukasz, there is no reason to be afraid. The fit seams quite good, and the missing details is somthin one can improve. 😉

Qwertzel
Sieht gut aus! Nehme auch mal Platz

Nicolas
Moin Quertzel, Danke für das Lob. Noch sind Sitze im Hubschrauber frei. 😉

bughunter
The Colani design is cool 👍 Have fun!
And I hope your covid is gone without bad effects!

Nicolas
Hi Bughunter, thanks.
Covid wasn't to bad, I got 3 day with mild syntomas and 5 days waiting for a negativ test. 😉

Mr D
Done some nice improvements Nicolas... Be worth it, it's good to do this as puts a nice personal touch on it, l need to pick up some card like you have used ( what is it l need to look for ?)
The 2 Revell models l built ...l found the decals took a bit more softening than others models l have done!? the decals said made in Italy....no company name.
Looking good 👍 be nice bright unusual one this 😁

Nicolas
Hallo Mr D and thanks.

You can look for plastic sheets and profiles (tubes, chanels, I-beams, etc,) from various manufacturers like AK or Evergreen or use packing material eg. most blisterpacks. 😉

Ian Doody
Made a start on the 1/32 Trumpeter F4F-4 Wildcat, I'm having my wings permanently folded, this is just all dry fitted so far, I'll add more detail later when the wing is added. No point cleaning up the inside part of the wing of ejection holes, as this will be hidden behind the wing. Think it looks ok so far.

Ian Doody
So today I've semi painted up the other sides wing root fold system. And started dry fitting the engine. Need to pick a scheme from the Techmod decals at some point, thinking of 1 or 4 so far.

Ian Doody
Ooh landing gear and engine support structure. Just needs a few touchups, thats it done for now, have to glue it all up straight away, doing it later would be a pain in the ass. Looks ok, I'm no expert on these things. Just for fun build in-between other stuff.

Ian Doody
I think, as an engine that'll do really, don't need anymore detail on it. Couldn't see it if it was there anyway. I'll paint the rear bank of cylinders, but that's probably it.

Ian Doody
That's all for today, making the most of what you get in the kit, only added bits of wire, no sense going mad with detailing parts you wont see. Prop tomorrow, finish the rear bank of Cylinders, and make a start on the cockpit. Looking nice so far, looks like an engine to me.

Ian Doody
Engine, exhaust manifold system and front bulkhead done. For what you can see, the kit parts are good enough. No point spending lots of money on a resin engine. Just some wire and a bit of paint.

Rui S
Looking special 👍 I'm in 😎

Guy Rump
Looking good and detailed build notes, following. 👍

Michael Keenan
The photo is from a review of the Planet Model/ANTARKI 1/48 North American NA-50 "Peruvian Air Force Fighter"

hyperscale.com/2011/..net238reviewse_1.htm

Alberto
I also have this one in my stash, it will be nice for sure. Following! 👀

Hugh CAST.
Very nice job!

Piotr Vanat
Thanks a lot guys.
This old Eduard set has its issues, which I will describe after I finish the model. So far, the main problem was the photo-etched instrument panel, which I mounted a little too far from the seat (or at the wrong angle), because this location suggested the arrangement of other elements in the cabin. As a result, the gunsight stuck to the panel, collided with the canopy. I solved the problem by mounting the sight on a longer piece of plastic, which may give a slightly caricatured effect, but what could I do?

Doubtingmango
Excellent interior! I did the 2021 update and really enjoyed the build

Alex K
Taking my usual seat...

Nicolas
Taking a seat next to Alex.

Ben M
🪑

J35J
Joining!

Ben M
It's looking great!

Nicolas
Good looking plane.

Robert Podkoński
Looks great already. Keep it up!

Nicolas
I got mine 3 weeks ago. Following with great interest. Looks good so far. 👍

Guy Rump
Looking good, following. 👍

DerMattes
Following, looking very good so far!

Cuajete
I got D version this week. I also follow it with interest.
Fantastic job so far!