Newsfeed

Ian Doody
Ebay gluebomb restoration project. Stripped the built parts down and cleaned them up.The beginnings of paint up. So much more do. But fun bit next, painting metallics by hand, and weathering it.

Ian Doody
Just started to block in the aluminium tub colours, only added a watered down acrylic brown/black wash. Now I wait for it to dry, then ink wash, aluminium layer, then varnish, then another light brown wash.

Kyle DeHart
Off to a quick start. You'll have it looking great in no time.

Ian Doody
First ink wash, just to put some life into the aluminium. I'll dry brush another metallic layer over this, then varnish, the do some more washes. Not a quick process, mainly due to drying times, but it looks really good.

Ian Doody
That's it for today. Still very early stage, second ink wash. It will become more subdued as I continue with layering the aluminium. This is an acceptable beginning though.

Villiers de Vos
Very nice weathering.

Jv
Taking a seat I am interested in how you strip it down I bought a few glue booms myself and not sure how to get the glue of

Ian Doody
That's it for today, and for now on this project. I've lost inspiration and desire to work on it, so back in the box, until I feel inspired to do it again. Just not feeling it, and I don't want to muck it up. Added a varnish layer, fitted the foot pedals and fixed the hole in the tub wheel bay cover.

Ian Doody
Back to the big Ferrari. The cool thing about 70s Tamiya kits, is they gave you buildable tools. It's a screwdriver and wheel nut wrench. Nice.

Ian Doody
Not a lot happening at the moment, I'm doing a lot of sanding, glueing small parts, changing bolt heads on the rear of the gearbox and brakes, as these will be seen. I'll add and swap out bolts on the black crossmember, suspension brace, as its also quite noticable. Also drilled holes in the e haust brackets, for the retention springs, Just a quick dry fit too. Even unpainted the engine is an impressive piece of hand-built model engineering from Tamiya.

Mark D
Following this one! (Have the same one waiting (with a little less glue)

Ian Doody
Scratch built the rear brake air intake cooling scoop bracket. Mad? Me? Probably 😂 there is no line down the middle, it's the crappy silver plastic. It makes dark marks appear at joins and sprue attachment points. I'll putty over the intake, then paint it to look like the clear fibreglass, suitably weathered, with a piece of tape to lesson the amount of air reaching the brakes, just like on the real thing. Exciting things ahead 😉

Ian Doody
And, yes I'm going to put in brake lines.

Villiers de Vos
Very nice progress.

Ian Doody
That's it for today, just blocked in some colour, weathering and extra details tomorrow.

Kyle DeHart
Looking good Ian!

Ian Doody
Weeeell, that's all for today. I'm knackered. Pretty good progress, I've almost finished the 312T's Transverse gearbox, added the plumbing, detail and weathering paint, painted the brake airscoops, added nuts, and painted the suspension crossbeam. Only the anti-roll bar and a bracket still to fit. Bloody good fun that was.

Ian Doody
I think this might turn out rather good.

Ian Doody
As always, doesn't look like I've done anything at all today. Finished off the anti-roll bar and brackets, made a start on the left hand side suspension lower arm, swapped nuts out for better ones, wheel mount, drive shaft and shock absorber, also made a start on the rear wing mounting bracket and battery holder.

bmod
Definitely pulling up a chair to watch this one come along. 🙂 Looks great!

Ian Doody
Not a huge update, as I've had a few days away from modelling. Finished the coil springs on both sides and the right upright and drive shaft. Haven't got to finishing the anti-roll bar yet, as I'm changing the support rods for thinner wire, so it looks more in scale. More soon.

Dominik Weitzer
looks great!

Ian Doody
Back to working on the Tamiya 1/12 1975 Ferrari 312T. Today was just to get reacquainted with the kit, remember where I was, what I had planned, and where I'm going. Tested the fit of the rear wheels and tyres, everything is just friction fitted so far, a long way to go yet. That's how good Tamiya kits are, even forty eight year old kits fit together so well. Work will continue tomorrow with the rear anti-roll bar system, as im making the connecting rods more in scale. This is going to look awesome finished.

Villiers de Vos
Welcome back at the bench Ian.

Ian Doody
As usual not a lot new to see. With one thing or another I've been busy with other things recently. But back to the rear of the 312T. Finished the gearbox, and rear suspension, anti-roll bar adjusters. Replaced the kit parts with pins, for a finer appearance.

Ian Doody
Sloooow work continues on the 312T. The Ferrari Tipo 015, 2,992 cc (182.6 cu in), flat 12, naturally aspirated, engine is a mini kit in itself. Its going to be a complicated, Spaghetti wiring job, there's twelve wires for the fuel injection and twelve wires for the electrical ignition system. Then all the water and assorted pump plumbing. but it's going to look very cool. I am going to add a few things here and there, and I've sourced some air funnel mesh guards. Also I'll be assembling the Octopuss exhaust system of twelve pipes too. Proper Italian plumbing nightmare, but it is a Ferrari lol 😆 all this is just dry fitted for now.

Kyle DeHart
Going to be a stunning powerplant.

Ian Doody
Mixed bag of modelling today, shook sticks at a few different kits. As winter is approaching, looks like I've got Ships and F1 cars in my future. I've been putting the Ferrari off for months as I worked through my Sci-Fi backlog, soo work will commence on the 1975 world championship winning F1 car, my birth year. Doing the bodywork air-intake mod, and scratch building the fibreglass valve covers, plus adding a lot of missing details, wiring and plumbing, swapping nuts n bolts, scratching the accelerator assembly, and spray painting the final bodywork for the first time... a lot to do, but it'll look very cool.

Kyle DeHart
Excellent. It's definitely going to look very cool.

Ian Doody
It has been a whole year since I touched the 1975 Ferrari 312T, omg 😲 finally put paint down on the main case of the Flat 12 engine. More soon.

Ian Doody
Ferrari 312T Tipo 15 Flat 12 engine. Only made a tiny bit of progress today, first pump and hose. More weathering to come. Then fitting all the pipes, electrics, rear transverse gearbox and suspension, and the exhaust system, that all pretty much needs to be done at the same time.

Kyle DeHart
Lovely work Ian!!

Ian Doody
Making a start on the big 70s F1 GoodYears.

Kyle DeHart
Love it.

Ian Doody
Making a start on painting up the first three exhaust pipes. I'm going for a 1980s Tamiya Catalogue, Francois Verlinden look. Painted to my personal taste, there's more than enough pristine, sparkly builds out there.

Villiers de Vos
Very nice effects on the engine.

Ian Doody
First six pipes of the exhaust manifold system finished and attached permanently.  

Martin Oostrom
Superb work!

Peter Muldoon
Thank you Martin! A little out of practice, but enjoying the process. Just happy to be modelling again really.

Peter Hardy
Very crisp looking detail Peter. Well done!

Peter Muldoon
Thank you Peter! 😊

Martin Oostrom
Doing a quick one to get back into it?

Peter Muldoon
Not intentionally quick, but there isn't too much to this kit so it is going quicker than expected. Good to be back at it.

Dominik Weitzer
very nice work. like the interieur and the "small" details on the engine. well done so far!

Peter Muldoon
Thanks Dominik!

Christian W
Super nice details! I like the brown you've chosen for it. At the end it will look great with the black rims.

Peter Muldoon
Thanks Christian, it's my attempt at a tan, made from a concoction of Tamiya acrylics.

Martin Oostrom
That yellow really pops! Great colour choice

Peter Muldoon
It's great hey. I wanted something a little bolder than normal yellow. This is the SMS Blue Angels Yellow.