Newsfeed

Robert Podkoński
Watching with interest.

Guy Rump
Another post war aircraft, remember these when we lived at Leuchars low flying over the married quarters. 🙂

Nicolas
Following

Ekki
I'm in too.

Guy Rump
Made a start on the Phantom. Cockpit and pilots plus internal decals added. 🙂

Welcome as always Nicolas & Ekki. 👍

Many thanks mates for your interest and likes Andre K, NordMito, Lukasz G, zhsv, J35J, Villiers DV, Bernd G & 1 other mate. 👍

Rolf Rolf
Nice, what's the kit like? I've been looking at getting it

Sergej I
Watching, good start! 👍

Guy Rump
Weights added to the nose. Internal part where cockpit will go sprayed Vallejo Model Air intermediate blue. Engine intake internals painted Vallejo Model Air Insignia white. 🙂

Many thanks mates for your interest and likes Mr D, Sukhoi242 & Austin LAI. 👍

@Rolf Rolf, Thanks for the kind comment. The kit is quite complex with a lot of parts and, as with some of the newer Airfix kits you have to be accurate as the fit is very tight. Other than that, so far, so good! 👍

Guy Rump
Intakes added to fuselage and cockpit added. 🙂

Welcome Segej! 👍

Many thanks mates for your interest and likes Tibor S & Matti T. 👍

DerMattes
Following 👍

Dave Flitton
Watching!

Mike Montgomery
I wonder if they got the engines right for the RAF Phantom. That's one area where kit manufacturers constantly get wrong.

Guy Rump
Fuselage now together. 🙂

Welcome DerMattes, Dave & Mike. 👍 @Mike, not certain about the engines, not an expert at all. 👍

Many thanks mates for your interest and likes Sergej I, Mona, Dave F, Maciej B & Arif S. 👍

Mirko Römer
Nice progress 👍

Guy Rump
Air intake covers on, wings and flaps on as well. 🙂

Many thanks for the kind comment Mirko. 👍

Many thanks mates for your interest and likes Martin G, Mirko R, Patryk S & Oliver. 👍

Guy Rump
All pf the flaps on, engine burners on, ready for primer. 🙂

Many thanks mates for your interest and likes Jonathan L, Sergio O, Hajo L & Johann C. 👍

Guy Rump
Primer added and pre-shading. I have put the main canopy on to protect the cockpit. I'll be using the open canopies for the final result. 🙂

Many thanks mate for your interest and like Der Mattes. 👍

Guy Rump
Main underside done, Hataka BS Light Aircraft Grey, Hataka Traffic White, Vallejo Model Air Gun Metal & silver used. Next will be the camouflage on top. 🙂

Many thanks mates for your interest and likes Dave & Neil. 👍

Guy Rump
Main base colour applied for camouflage (Hataka BS Dark Sea Grey) 🙂

Mr D
Looking good Guy 👋👍
Smart aircraft.
I have a little 1:144 one in the stash, lm going to do the German version.
Keep up good work 👍

Mr D
Thanks Alberto 👍
How's the Be-12 going?

Robert Podkoński
Watching with interest 🙂

Mr D
Thanks Robert 😁👍
I've built few of these little guy,s there nice n easy n refreshing after bigger builds.

Mr D
Thanks Villiers 👋😃👍
.fun little builds good for filling gaps on the shelf .

Guy Rump
Looking good, following. 👍

Skyhiker
I think you should do the factory test model red AND the conservative grey scheme! They are both cool. Heck maybe you should do 20 or 30 of these little suckers. That would be fun.

Mr D
Hi Skyhiker 👋
Thanks.... the red looks smart, quite a few weapons to paint up too.. going to need my magnifying visor.
I have the German F4 phantom and the hornet lined up in the stash 🤣

Mr D
Thanks Edouard 👍
I noticed you have the Airfix Tomahawk on order?
That's a really nice kit to build ...goes together well , the back wheel n control stick are bit fragile! So be careful.

Ben M
Is that a Su-9 in photo 10?

Mr D
Hi Ben 👋
It's
Starfighter,
F-14 tomcat,
Mig-21
Mig-23 ground attack version.
👍

Ben M
😍

Guy Rump
Lovely collection. 👍

Mr D
Thanks Guy 😁👍
The little 1:144 good for saving room 🤣.
I would like to do full size Starfighter at some point .

Mr D
^^ full size 🤣🤣 1:48 ^^

Ben M
Hahaha! I have a "full size" starfighter coming up too. It's such a beautiful aircraft.

gorby
Nice result on all of them.

Mr D
Thanks Gorby Appreciate it....there my little fill-in substitutes ....till l get round to 1:48
Definitely want to do a Starfighter in larger scale.
Good luck with your projects 👍

Mr D
Thanks for the lovely Likes 😁👍
Will have to look into the fiddly weapons next.

Skyhiker
Looking good

Andrzej Rygiel
I like to do 144th scale minis in between some bigger scale models and your Tigershark is an eye-catcher, it will really stand out in this bright livery! Gives me some ideas for my next builds 😉

Mr D
Hi Andrzej.
Thanks 👍 yes they are nice to do now n then between or after bigger builds.
Yes it's a nice bright red, the Northrop factory colour.
Good luck with your projects 👍👍

Mr D
Thanks for the Likes everyone 😀👍
Nice quick easy little build, the paints are AK Intense acrylic.

Miguel Vaquero
Looking pretty good D. Amazing as always

Mr D
Hi Miguel 👋, thanks ... appreciate it.
This one was moulded quite good, l had to build up the bottom intake on one side a little, but l think that was me not fitting the part level.
I have an F-4 phantom from this range in the stash, l managed to get so 144 German decals for it ....they cost more than the kit 🙄🤣.

Miguel Vaquero
Well I'm really hoping to see more of your 144 work because it's impressive. And as for the F4 decals, well, spending money is the biggest part of this hobby 🤣🤣

Mr D
True 🤣 l need a good soviet cockpit paint now 🙄

Mid Franconian
I need to watch this!

Cuajete
Me 2!

J35J
I'm in!

Łukasz Gliński
Me 4, might be my reference in the future 👍

Robert Podkoński
High five!

Nicolas
Joining.

Marius
And I thought starting my third such kit from KP/RV Aircraft is self torture. The truth is, once you had finished one of them in the past, the frustration decreases with each new one.

Any idea how you will treat the taxiing lights?

Thomas Kolb
Marius, I honestly don't think this kit is so terrible. There are some fit issues for sure, but I have built much worse kits. I constantly keep reminding myself that I only do this for relaxation and fun, and not for a competition or as a profession.

Are you referring to the swiveling landing lights underneath the intakes?

Marius
Thomas, I share your opinion about the kit and hobby too actually. The kit is dreadful in a few areas, but overall more than decent. I finished two of these already and I must say, they really stand out my collection, despite the kit's reputation.

Yes, I was refering to those lights. If I remember it correctly, there are some transparent parts included in the kit, but the intakes are completely flat, where the lights should go. I made the mistake to install those lights in the closed position, instead of the more interesting setup, when they are deployed downwards. In any case, it's just a heads up, in case you might want to add some extra detailing.

Thomas Kolb
Yes, I see your point regarding those lights, but I will probably just stick to my usual middle road - easy to accomplish and still produces a cool result. 🙂

Martin von Schreckenstein
haha, love the topic and kit selection. you are definitely more meticulous than I was 🙂

Thomas Kolb
Martin, I saw your MiG-23 project - it is way more ambitious than mine! I am not so meticulous, just very, very slow, only having an hour or two to spend here and there.

Thomas Kolb
A bit of a setback here. I just realized that I had foolishly been following the assembly drawings and thus ended up with the wings upside down. Bottom side up and vice versa. It may not be something that is easily noticeable, but knowing myself, I would never be able to unsee it now. So I am backtracking my steps and need to change the way the wings are facing without ruining the fuselage. Mamma mia, what a noob mistake-a to make-a.

Łukasz Gliński
Great you found it out before it was too late. I see we used to watch the same TV series 😄
[img1]

Dave Flitton
Watching!

Thomas Kolb
Łukasz, yes, haha, you found the hint.

Finn
I'm in

Jiri Vybihal
good luck 😄

Guy Rump
I'm in too. 👍

Cuajete
Good job with the air intakes 👍

S M
I'm in! I'm also working on KP's MiG-23 and had the same issues with fitting and wings. Damn I didn't notice that the wings are upside down...

Cristian A
I'm taking a sit as well 🙂

Thomas Kolb
Thank you gentlemen for your encouraging words! 🙂 The twin seater assembly is done, and now I need to finish the single seater. I am now thinking about which individual aircraft to represent and which camo to use.

aetios
This is looking great. watching with interest!

Cuajete
I agree with @aetios 👍

Cristian A
Hi Thomas, nice progress. I think the Tamiya paints are my favourite so far. They apply well and they don't smell so strongly.

Thomas Kolb
Cristian, yes, they are mine too. They also react superbly well to the Mr Color Leveling thinner and level out to perfection. Too bad that the color range is a bit narrow, you need to mix almost everything.

Cristian A
Thanks for the tip Thomas, I recently discovered Tamiya paints. The hobby shop seller recommended "Aqueous Hobby Color Thinner" and using that works well also.

Mirko Römer
Respect! 🙂

Michael Kohl
Following

Thomas Kolb
Damit, ran out of white paint.... I decided to also order the Mr Paint Hungarian set to see if they are any good.

Łukasz Gliński
Mr Paint is grand, but more stinky than Tamiyas

Mr D
If l cut an item of the spru and it has a possibility of mix up, l up a little bit of making tape with part number on it to label it up, l do this as made this mistake before with wheel bay doors !! " Wanded when so much sanding needed!" 😆.
Every build has it's niggle...once it's been on shelf a month...soon forget, good work

Thomas Kolb
Mr D, yes, it's a good tip. But it doesn't help when the assembly drawing is wrong! The best is to constantly keep referring to real photos - sometimes even apex companies, such as Tamiya, Special Hobby or Eduard make silly mistakes.

Mr D
I know, I'm doing a Tamiya and they missed of colour required for 3 different parts!

Thomas Kolb
The masking of the standard single seater is a pretty relaxing task, but Iván The Terrible (no 20), with its blotchy, multi-color camo is proving a real challenge. I am trying to add the colors in the order as they were applied on the real aircraft to make the pattern realistic, but man, it is tricky!

Ekki
Following.

aetios
Hey Thomas I wonder how you got the camo masking so clean, mind sharing some insights?

Mr D
Looking good, are you doing them to match box art ? the one camo looks tricky.
👍

Thomas Kolb
Time is currently absolutely non-existent for modeling, but soon …

Aeitos, I am using Tamiya masking tape, cut to shape with a brand new blade. The original had have slightly soft lines, but I am totally unable to fix that to scale.

Mr D, no, for the single seater, it will be the standard Hungarian three color camo, but Ivan (the two-seater), will have that weird Soviet five-tone camo pattern.

Mr D
Thanks Thomas 👍
Office/ Blue tack masking gives a softener edge to camo edges... I think because of it sits higher the paint doesn't blow in the edge to hard.