Newsfeed

George Williams
Nice model of one of my favourite sports cars.

Christian W
Mine too! Nicely built. Very nice paintjob and finishing. Beautiful.

Spence Wilson
Nicely done. Beautiful paint.

Neuling
Beautiful!

Emanuele Matteucci
Wow....

Erik De Smet
That kit is older than you, Greg...

Robert Podkoński
Taking a seat!

Alex K
Joining the audience.

Finn
Once again joining (of course)

Greg Baker
This one is likely to be a quick little build. It's basically the companion piece to the Puss Moth, so I felt like I couldn't really build one without the other. Erik is right though, the kit is of an impressive vintage. It is indeed a few years older than I am, and has the flash to prove it. 🙂

Anyway, thanks for joining, there's plenty of seats available, so no shoving. 😉

Nicolas
Looks like fun. joining.

Greg Baker
You say that now... but wait till you see how much putty and sanding is required~

Alex K
Hmmm hmmm hmmm... So, is it a Demon or a Hart? And what about that rear cockpit?

Greg Baker
Well, it's supposed to be a Hawker Hart apparently... but the Hawker Demon is close enough... I mean, it's not like it's a Spitfire. 😉

Alex K
Good enough for me - I'm arguably one of the least rivet-counting persons in here... just asking/checking... 😉

Ben M
👀

Matthew A
And only a masochist with ADHD would consider trying to convert it back to a Hart like the original 1957 tool... 🤪

Greg Baker
What did you call me? 😉

I mean, besides the dip between the two cockpits... are there any other differences? They look quite similar to me...

Alex K
Well, the "dip between the two cockpits" is the main difference I was referring to above... Plus, you'll have to skip the Demon's long exhausts, I guess...

Cuajete
Following!

Łukasz Gliński
Me 2

Lode Schildermans
In for tais New Tintin adventure

Greg Baker
Not exactly sure what picture to take to update my progress… I'm working on bits of everything all at once!

Matthew A
The main difference between a Demon and a Hart is the exhausts, the turret and the starboard machine gun. Will send a PM

Alex K
IF however (regardless of how a real Hart should be) what is shown in the comic ("That's what I call" etc frame) is indeed a starboard mg (please correct me if I'm wrong...) then starting with a Demon kit was perhaps indeed a better idea than starting with a Hart kit.... IF this is the case... then you'll only have to deal with the rear seat/turret thing and the free (ala Fury) exhausts, no?

Greg Baker
Yeah. I think so. Matthew provided some detailed comparison images but after looking at them and at the main page from the album... it seems to be a little bit of both...

Matthew A
The 1930s version
i.imgur.com/CrTThem.jpeg

bughunter
I see "Seven at one stroke" projects on your bench 👍 Please keep them coming!

Matthew A
In Tintin in the Land of the Black Gold it could be a Hawker Hardy
i.imgur.com/57c2RcA.jpeg

Greg Baker
That's the original "leaflet dumping" aeroplane. Nice find!

Greg Baker
Made a bit of progress on this one. 🙂

Greg Baker
A couple of updates. The supports next to the fuselage were so weak that 3/4 of them snapped even before I got them off the sprue. So instead I just used some bent wire. The holes they are meant to slot into were gaping caverns as well, so a fair amount of putty was needed to make it at least slightly better. Now I'm left with a decision to make. The Hawker Demon has two large exhaust tubes that run from the engine down the sides. They're not present in the Tintin album (which most closely resembles a Hawker Heart I believe). So... do I leave the two side holes and the large trenches on either side of the engine cowling, or do I just shrug my shoulders and use the parts that came in the box?

The Blue Rider decals went on easily enough. They're a bit shiny, but I think I can deal with that.

Matthew A
Looking joly good

Greg Baker
Thanks Matthew. I'm quite pleased with how the colouring came out too. A 2:1 ratio of Tamiya Buff (XF-57) and Khaki (XF-49) seems to have done the trick... or at least close enough for me.

Cuajete
Painting color looks so good 👍

Greg Baker
Decided to include the exhausts. It looks odd without them…

Greg Baker
I just noticed the artwork has actual rigging on it, so it looks like I'm not quite as done as I thought. Besides that, only a few nice white fluffy clouds needed for the base.

Cuajete
Great, greg! 👍

Greg Baker
Thanks Cuajete!

Greg Baker
And there we are. All done!

Robert Podkoński
Congrats, Greg! Good job!

Neuling
Same as Robert.

Ben M
Very nice addition to your collection!

Łukasz Gliński
Looks great in these Danish markings and that colour. Btw what paint is it?

Greg Baker
Thanks guys!

Łukasz - the paint job comes courtesy of a 2:1 ratio of Tamiya Buff (XF-57) and Khaki (XF-49). I hadn't realized these were Danish markings though... that's very interesting. I'm going to do a bit of research about that.

Łukasz Gliński
Looks quite Danish to me, though at least one Polish airplane sported these before the checkerboard has been approved (1918).
Thx for the paint info.

Erik De Smet
the Danish flew with hawker nimrods between wwi and wwii but these had not the roundels on the fuselage but a large Danish flag on the tail, and of course no desert camouflage. I think Hergé must have known this.

Ben M
Nice work!

Neuling
For sure!

Mark DeBacker
The canvas mantlet cover looks particularly good. Nice work.

Villiers de Vos
Very nice work on the cockpit.

Robert Podkoński
Taking a seat here 🙂

Lorraine Lin
Following, thank you for sharing.

Neuling
Excellent work.

Andrzej Rygiel
Thank you folks, I hope to add couple of better photos later on, all of these were taken by my phone camera only.

Steffen
Hallo Thomas, ja, die sind noch da!
Hättest du sonst noch an etwas aus meinem Stash Interesse?
Gruß, Steffen

Thomas Neuss
Hi - die beiden Sachen sind dann alles. Ich komme mir selber etwas dämlich vor, dass ich das übersehen habe, als ich die Mosquito angefragt habe... seufz. Jetzt bin ich alles durchgegangen. Viele Grüße, Thomas

Steffen
Hi Thomas, damit ich das Porto bestimmen kann, muss ich wissen, wo du wohnst. Wäre PayPal ok? Gruß, Steffen

Thomas Neuss
Hallo,
der Versand wäre in Deutschland, hier schon mal meine Adresse:
Thomas Neuss
Wilhelm-Leuschner-Weg 5
25524 Itzehoe
PayPal (Freunde) ist völlig ok für mich.
Viele gRüße
Thomas

Thomas Neuss
Hi Steffen,
das wären dann 13.- für die Control Surfaces und 10.- für die Exhaust Shrouds + Porto, richtig?
Viele Grüße
Thomas

Steffen
Ganz genau! Das sollte als Großbrief für 1,60 EUR gehen.
Mein PayPal: steffen.kunze@posteo.de

Thomas Neuss
Prima - ich habe Dir per PayPal das Geld gesendet.
Viele Grüße und schon mal vielen Dank 🙂
Thomas

Steffen
Super, danke, kam an! Ich bin morgen wieder zu Hause und melde mich, sobald ich versendet habe. Gruß, Steffen

Thomas Neuss
Prima - eilt nicht, ich bin ab Mittwoch ohnehin 10 Tage unterwegs... 🙂

Steffen
Brief ist fertig, muss ihn nur noch abgeben

Steffen
Der Brief ist unterwegs

Oleg Smilyk
Hey, Oleg, a very rare object in excellent execution!Excellent attention to detail!

Finn
Well done indeed!

Oleg Bogolei
Thanks! This model is very easy to build)

Oleg Smilyk
Hey,Oleg,very nice result!The wing mechanization of this model is impressive. The armament is very rare, beyond all praise!Great job!

Tibor Szilvai
Nice work! 👍

Łukasz Gliński
Impressive job 👍

J35J
Great work!👍🏻

Sergej I
Another excellent Navy birt, Oleg! 👍

Neuling
Every praise you got here is well deserved. 👍👍

Finn
Beautiful!

Ekki
Very good work!

Robert Podkoński
Fantastic job, Oleg! Chapeau bas!

Oleg Bogolei
Thanks mates!

Mark Sherwood
Lovely build Christian, nice 'n' dusty. 🤘🥸🤟

Christian Abraham
Thanks. This is really build from me. I hope my newer models will look better.