Newsfeed

WAHO LEU
High-level works will be produced, look forward to and admire them.

Spanjaard
I am in 🙂

Łukasz Gliński
Me 3

Ronan
Welcome 😉

DerMattes
Taking a seat 👍

Ekki
Watching.

Alec K
Taking a seat. Amazing detail as usual 👍

NLAWScametovisit
At this rate, Ronan will solve the gearbox issues before the USMC!! Following!

Hajo Lippke
Another great start for a wonderful project!

Miguel Vaquero
Amazing detail on those interiors! Following

Ronan
Many thanks , mates 😉

Skyhiker
Watching with interest

Finn
Following

NICOLAS GRANDMONTAGNE
Encore un super projet!
Beau debut, hâte de voir la suite! 😉

Nicolas
Following

Ronan
Merci Nicolas

Hanno Kleinecke
Checkin' in, let the show begin !

Patrick Hagelstein
Bring it on! 👍🏼

Florian H.
Erste Reihe🙂

Michael Kohl
Ich natürlich auch.

Spanjaard
i am in 🙂

Melgg Lütschg
That's interesting 🙂

Alec K
Another Bernhard extravaganza, I am in 👍

Tom Spiegelberg
So, schnell ein Glas guten Wein holen und dann nehme ich gerne Platz.

Robert Podkoński
Taking a seat!

Sergej I
Following 👍

Bernhard Schrock
You are welcome. As usual a lot of first rows free! Popcorn for all! 🙂

Dietmar Bogatzki
Schnell noch eine Cola geholt und Platz genommen, Bernhard 🙂

Felix Troschier
Da gucke ich doch mal mit

Harry Eder
Ich schließe mich da mal an

CaptGPF
Sitting down to watch the extreme detailing build!

David Taylor
Back in.

JAM-SCREW
Fantastic - looking forward to seeing it unfold!

Gary Victory
Nice start Bernhard.

Hans-Jürgen Haag
Nice start 👍👀

Robert
Following 👍

J35J
Wow! Great start👍🏻

bughunter
What a combination: a great new kit, nice accessories and finally a master modeller at the tools - EPIC !

Bernhard Schrock
🙂🙂🙂🙂🙂 Thanks!

JAM-SCREW
Lovely extra details and mods! very tidy Bernhard.

Bernhard Schrock
Thank you JAM-SCREW.
Btw: just I saw you actual portfolio of sets for the Seaking! SCM Brand: JAM-SCREW
Absolutely remarkable!! I'm looking forward especially for the landing gear and main rotor hub. 🙂

Qwertzel
Gute Arbeit! Nehme Platz.

Mid Franconian
I take a seat as well!

Hanno Kleinecke
Just look at that winchframe !!! There is absolutely no doubt that after plugging these plugs the winch will be working. As with all your builds, for the watchers the path is the destination.
Wonderful wip pics - keep'em coming…… 🙂 👍

JAM-SCREW
Rapid progress sir! Very impressive attention to even very fine details for accuracy. Thank you for the updates and images.

Guy Rump
Following with interest. 👍

Spanjaard
that winch is jaw dropping... amazing.

gorby
WOW! Remarkable work so far.

Michael Kohl
What the hell is Ureol?

Bernhard Schrock
Michael ureol is A kind of foamed plastic. It comes in different degrees of foaming. The more foamed, the softer and lighter.

Robert
Hallo sieht genial aus.
wo bekommt man sowas ? habe auch schon versucht sowas zu finden.

Michael Kohl
Ah, that explaines as well the nice texture the cushions have. Thanks for the info.
And - by the way - as always a pleasure to follow your delicate modelling.

Bernhard Schrock
Your are welcome.
Robert: vor paar Jahren habe ich von einem Modellbaubekannten Reste zum probieren gekriegt. Daher musste ich erst mal schauen, wo man das kriegt: eBay hier und da so wie bei Modulor in Berlin.

Gordon Sørensen
Great looking detail you are adding, Berhard! Those seat cushions are fantastic.

Florian H.
Vergiss nicht, einen Kasten Bier bereitzustellen, wenn du die bordtoilette nutzt 😉

Lode Schildermans
Absolute masterclass in progress, Bernhard

bughunter
Eine Detailorgie allererster Kajüte 👍

Spanjaard
a bit more additions, and you can forget about buying kits 😉

Bernhard Schrock
Thanks for comments and praise.I would like to share the praise with the excellent photographers (TN and BD). Ä Only such photos as from TN and BD make it possible.🙂

David Taylor
Wow.

bughunter
It was probably difficult to wire all the little rotary switches on the back. I assume that they all work!

Dan Parsons
Just absolutely fantastic Bernhard, I dont think everyone will appreciate just how difficult all those details you have added are to do. you have achieved what I only dreamed of achieving. I am lost for words with these details. Stunningly beautiful work.

Bernhard Schrock
Thank you David, bughunter and Dan for you very motivating comments🙂. The Seaking is meanwhile my favorite helicopter. It was great to see one of them flying over the beach in Boltenhagen: we went on vacation there last year.🙂🙂

Bruce Huxtable
I am impressed not only by your skills, Bernard, but also that you are not over-whelmed by the many, many fine details that you are taking on. RESPECT 🙂

Alec K
I agree with Bruce. Inspiring progress 👍

Augie
Awesome work!

Bruce Huxtable
Goodness, Bernhard, another micro-kit! Immaculate, inspiring!

Augie
I'm just in awe, master work here.

Hanno Kleinecke
Last monday I had the chance to take a very close look on all these masterpiece subassemblies in person - an all new level of depth in detail, even by Bernhard's standards !
These oxygen bottles look as if they were very closely related to 500 pound bombs….. ? 🙂

Bernhard Schrock
I'm happy that you like my bottles... 🙂. In fact, I have often used bombs as a basis for various parts. 🙂 This time, however, it is a sprue with a diameter of 4 mm.

Dietmar Bogatzki
Awesome work, Bernhard 👍

ScaleFella NAFO
Tuned in! amazing details

Michael Kohl
Some very fine modelling going on here.

Spanjaard
very best kind of modelling 😉

gorby
The level of detail is mad. amongst the best scratch-building I have ever seen on Scalemates.

Mark Snel
Amazing!

Alec K
Excellent progress. I like how in Germany, when helicopter model parts get mailed, one just has to write "Bernhard" on the box and it gets delivered to the right person… 😉 😄

gorby
😄 😄 😄

Hanno Kleinecke
I'm out of superlatives ! What can one say - you are constantly exceeding your own standards with this build, and that really says something !
Deeply stunned and impressed by your R.O. workstation !

JAM-SCREW
Well, first test is passed - package arrived. Second test passed looks in good condition. 😋. Now is the real test. How does the builder feel about the parts and are they suitable for this unbelievably excellent project.... time will tell.🍻

Spanjaard
one thing is for sure, they could not get to better hands 😉

David Taylor
JAM-SCREW.How big is your production facilities,you might need bigger premises as your products look great albeit in the hands of a master modeller.

bughunter
Wow, again every little sub-assembly is a fine model on it's own - fantastic 👍

Bernhard Schrock
Thx for you feedback 🙂🙂
The entire interior is lined with upholstery, which is primarily used for noise-insulation. Until yesterday, I broke my head because I didn't know how to repicate it… After a conversation with a mate (thx Hanno), the brilliant idea came to me: Fimo clay.
The material can be processed excellently and is solid in the oven after 30 minutes at 130°. The most important thing is that it does not become bone-hard but left elastic and can even be sanded.

Hanno Kleinecke
Again you nailed it ! That Fimo stuff looks very realistic ! 👍

Michael Kohl
150 pics and you didn't even close the fuselage. And not a second of dullness. Finest modelling entertainment. 🙂

David Taylor
Will you be adding crew Bernhard.

Joseph Russo
The insulation is amazing but so are the pieces of equipment

Bernhard Schrock
This morning I was curious and unpacked the chassis of Jam-Screw. As already written, the quality is outstanding. But everything is so filigree that you have to be very careful and not to break anything when handling. I had to improvise a bit here and there. In the end, I was finished after 2 hours. Including preparation for laying the cables.

Tom Spiegelberg
Der Baufortschritt ist echt sehenswert und beeindruckend Bernhard. Die Bilder vom Innenraum von Dir und Thomas sind toll! Es gibt leider sehr wenig Bilder vom Original und sind eine tolle Vorlage. Vielleicht macht ihr nen extra Walkaround hier. Ich freue mich schon auf die nächsten Bilder.

Bernhard Schrock
Danke fürs Lob Tom. 🙂. Dank der hervorragenden Innenraum-Fotos macht es wirklich sehr viel Freude herumzupuzzeln. Mein Seaking Projekt hat, könnte man sagen, eine „kritische Masse" erreicht. Dank diversen Kontakten zu Hubschrauber-Spezialisten, und ehemaligem Wart und nunmehr der Connection zur Jam-Screw habe ich die Möglichkeit offene Fragen auch dort zu klären. Für seine CAD files hat JS / Andy und seine Leute hunderte von Fotos geschossen, zu den ein normaler Sterblicher keinen Zugang hat.
Deinen Vorschlag werde ich an Thomas weiterleiten. Deine Idee ist sehr gut.🙂

Alec K
Jam-Screw additions are looking spectacular 👍

gorby
Amazing attention to detail!

Dieter Bihlmaier
Spechless 😉

Dietmar Bogatzki
Wahnsinn was du da reingesteckt hast allein die Instrumente und Sitze sind schon ne Show

Dietmar Bogatzki
👍 👍

Bernhard Schrock
Thank you for the big praise. I am very happy to have such a large number of fans of this WIP.🙂🙂
Dietmar: nur dank der Unterstützung von einer Handvoll von Mk-41 Fans ist es mir möglich so tief in die Materie einzutauchen.
Übrigens: Ganz am Anfang wollte ich die Türen offen lassen und nur ein „bisschen" im Inneren tun. Aber als ich die Fotos von Thomas betrachtet habe, bin ich „getürmt und hab mich auf dem Boden versteckt". Irgendwann habe ich jedoch den „Zustand der inneren Ruhe" (die Phase wenn ich kein Problem mehr damit habe mich z.B. mit einem Rucksack aus Fimo eine halbe Stunde zu beschäftigen)🙂🙂 und betrachte es inzwischen als eine Herausforderung, wieviel ich von dem Zeug nachbauen kann.

Shar Dipree
Awesome work so far! 👍👍👍👍

JAM-SCREW
Very exciting to see what can be achieved with even a very good kit. Commitment and patience wonderful recipe for outstanding success. A pleasure to go along for this journey.

Sy Bar
Truely amazing scratch building and detailing 🍿

bughunter
Impressive labels! Is your "normal printer" a InkJet or a Laser printer?

Bernhard Schrock
Thank you for your unique and supportive comments !🙂🙂
It's a usual business copymashine/printer in tower design, Minolta serie 7.

Bruce Huxtable
The interior is a delight to the eye, for sure. Inspirational modelling🙂

gorby
Just caught up with your build and it is jaw-dropping!

Bernhard Schrock
🙂🙂.
The last big point for interior components is completed: rack for electronic equipment & foldable seat.

Dietmar Bogatzki
einfach nur geil Bernhard 👍 /y)

Lode Schildermans
Simply amazing. There are no words to describe this level

Alec K
I agree with Lode. Just outstanding research and execution.

CaptGPF
God God! I'm just amazed how much scratch built detail you put into this build with each passing day!

Bernhard Schrock
A waterproof green rubber mat is laid on the cabin floor of the SeaKings of the German Navy. However, not under the equipment rack and not in the area of the „shower cabin" (radaroperator workstation). There, the rubber mat was left out, shortened and folded upwards.

At the points of the mountingpoints and other hatches, access covers (probably also made of rubber) are incorporated into the rubber mat.

Spanjaard
i really love the details of the rack for electronic equipment & foldable seat.

gorby
Astounding! 😮

J35J
Speachless, one of the best builds I've even seen.👏🏼👏🏼👏🏼

Hanno Kleinecke
The lecture continues ! Altough it's a pity to partially hide all these wonderful details in the closing halves, I'm curious !

Bernhard Schrock
After completing the engine housing I begun today detailing the bottom.
Just as on the fuselage sides, the equipment on the bottom of the Mk41 is different from the british variants.

Kim Branders
A masterpiece...😮......a big 👍

Alec K
The level of detailing on this thing is simply too notch. Number of bits you have added must be in the thousands! Masterclass 👍 👍👍

Dietmar Bogatzki
Einfach nur Geil.....hast du jede Niete nachgezählt, Bernhard 👍
Liebe solche Modellbauer da komme ich nicht mit

Hanno Kleinecke
Holy smokes, this is escalating everytime I'm checking the progress here !
The Airfix-guys must be crying for their mama by now…….😄

Qwertzel
Sehr schöner Innenraum. Ich liebe deine medizinischen Hilfsmittel. Bin selber im Thema drin und kann keinen Unterschied zu den realen Maschinen feststellen. Echt gute Arbeit!

Bernhard Schrock
Thank you for the last wave of such nice comments. I have the last big hurdle to taken: installing clear parts for the cockpit without mess.
Qwertzel: freut mich, dass dir mein Medizin-Equipment gefällt. Du hast erwähnt, dass du selbst sehr dicht dran bist. Hab gesehen dass du auch einen Rettungs Quirl im Bau hast bzw. Eine ganze Menge von Feuerwehrfahrzeugen. Bist du selbst auch im Einsatz? LG B

Qwertzel
Ja, kann man so sagen. Bin seit mehreren Jahren bei der freiwilligen Feuerwehr, bei den Maltesern und beim DRK im Sanitätsdienst und Katastrophenschutz. Ab einem gewissen Punkt ist das ganze Rettungswesen eher eine Lebenseinstellung, anstelle eines Hobbys

Alec K
The paint is on! Best of luck with the clear parts 👍

Alec K
… and they are in place, flawlessly installed. I admire your precision, truly excellent 👍

Bernhard Schrock
Thank you Alec: Your comment honors me very much.
Today morning I worked on the nose, installed several parts of SeMa Models And finally the „thing" looks like a Mk41. 🙂

bughunter
This model will be THE one and only REAL Seaking 👍

Dieter Bihlmaier
Your eye for detail is terrific Bernhard!

Zbynek Honzik
I look at the photos and marvel at the precision and modeling skill. Fantastic, Bernhard! 👏👏👏

Michael Kohl
You have all the reason to be satisfied. Outstanding achievement.

KyMustang
Very impressive. You should be satisfied!

Bruce Huxtable
Here, here!

Joerg Stange
Richtig klasse Dein Seaking! 👍

Hanno Kleinecke
Incredibly realistic look and extraterrestrial cleanliness in paintjob and especially masking the clearparts, exemplary !

John
Looks amazing! Beautiful results on that glass, I bet that felt good to remove and see the results. 👍

Ray Loch
Stunning, that interior is something else.

Alec K
Simply magnificent 👍

Bernhard Schrock
I have hardly any experience with 3D printed parts, especially concerning the flexibility. The material used by Jam-Screw is quite brittle. Therefore, I decided to disconnect the axles and insert a wire. This also has the advantage that you can align the wheels precisely afterwards, especially because they are flattened.

PK99
Wow!! Unbelievable details.

Bernhard Schrock
Thank you mates. 🙂
Result of a modeling mini task: DIY FOD covers.
I wanted to be very „smart" and install the exhaust pipes from the outside after painting. I overlooked that the opening in the fuselage is much smaller than the „hidden" end. Therefore, I had to improvise: I sawed off the outer end and inserted them obliquely from the outside.

Michael Kohl
I just love to follow this build

Alec K
I just can't get over the sharpness of the color separations. Absolutely straight, no ragged sections. Superb.

Bernhard Schrock
🙂 🙂
As usual I installed the door without glueing via 2 x piece of 0,26 mm wire. I drilled 2 holes (0,24 mm) from outside through the door into the fuselage.
Who can find the two places? 🙂

Alec K
Top right, along right edge and within the flange to the left?

Bernhard Schrock
Alec alias „Eagle-eye": 2 x bingo! 🙂

Bernhard Schrock
Today I finished one of the last complex parts for the fuselage. The whippers. What do you think: how many individual parts does a windscreen wiper consist of? 🙂

Spanjaard
about 10, at least

Spanjaard
probably about 15

Bernhard Schrock
Spanjaard: tadaaaa!!!!! Almost bull eye! 17 per wiper. 🙂

Sergej I
You missed the wiper mechanism spring 😄

Joking, I have no idea how you manage to cut and drill such microparts.

Spanjaard
😄

gorby
Just been looking at your wipers in awe (not a phrase I thought I'm be using this morning). Stunning work!

Siegfried Van den Bosch
Stunning !

JAM-SCREW
On going master work on a masterpiece. Fantastic in all respects mate.

Vincent
Amazing work on the wipers!

Bruce Huxtable
Fully-functioning wipers? Too much for my brain to comprehend...... Amazing, Bernhard, amazing...!

Dietmar Bogatzki
Guess 7 Parts per wiper 👍

Bernhard Schrock
Never before have I completed a tailrotor in this quality in such a short time! Thanks to Jam Screw!!!🙂🙂🙂 Compared to the original, all this is great: even the kink at the back edge of the blades is reproduced correctly.

Alec K
Looks amazing 👍

Олег О
Гениально )))

Michael Kohl
Your spectacular build and pic 255 makes me wanna build one german SAR Seaking too.

Bernhard Schrock
I'm glad I was able to inspire you for this machine. By the way, I was lucky/opportune to see the 89 + 63 and 83 + 58 live on Friday at the very last statics display in Nordholz. Hence the photos: in bright sunshine! All spotters were really lucky!🙂🙂

Robert Podkoński
Wow! This is going to be a true masterpiece... Watching with pleasure and interest!

Ben M
🤯

CaptGPF
That PE work is insane! Gotta watch this!

Michael Kohl
Very interesting project

Pietro De Angelis
😲

gorby
Looks very interesting build.

Finn
Following

Jennifer Franklin
me too

Dietmar Bogatzki
taking a seat

Landlubber Mike
Thanks guys! Hope I make it worth your while!

Nicolas
Following

Neil
Me too 👍

Landlubber Mike
Welcome aboard Nicolas and Neil! Thanks for your interest.

Lochsa River
have to sit in...this is in the stash...I was looking at it yesterday...

Lochsa River
A tip...others who built this kit had trouble around the cockpit....

Guy Rump
Following! 👍

Carlo
Nice, a flying boat. Hope this(or Sword) kit gets re-issued one day soon..

Alec K
Taking a seat.

Landlubber Mike
Thanks for following guys. Lochsa, you're right about the canopy. There are fit issues in general with this kit - most of which aren't too difficult to deal with - but the canopy is a bit of a mess. I'm not really looking forward to that part of the build.

Robert Podkoński
Taking a seat here too!

Landlubber Mike
Thanks for joining Robert!

Michael Kohl
Didn't know the subject, like the projekt, love to follow.

Landlubber Mike
Thanks Michael - glad to have you along!

Ben M
💺

Zbynek Honzik
Taking a seat!

Landlubber Mike
Thanks Ben and Zbynek, welcome aboard! Thanks for looking in!

Alec K
Nice detailing and progress 👍

Transall NG
A nice and strong landing gear !

Landlubber Mike
Thanks guys! Transall, it seems a lot stronger than the kit parts which were made from pretty thin plastic.

Pietro De Angelis
Beautiful work, congrats!

Landlubber Mike
Thank you Pietro! Still a long way to go. In the middle of priming the fuselage and having gap and other problems popping up. This is the build that never seems to end 🙁

gorby
Amazing work on the landing gear.

Landlubber Mike
Thanks Gorby! This was my first time trying to scratch build landing gear. Took me probably 20 hours 🙁 I ended up using Albion Alloys brass tubing for a lot of it, along with music wire, copper wire, plastic tubing, and other materials. I've bumped it a few times already and it is very stable so fingers crossed it makes it to the finish line!

Mr D
Nice 😀👍 a water-bird , nice work and like the extras

Landlubber Mike
Thanks Mr D! Really appreciate it!

Jennifer Franklin
I love all the scratch building, especially the landing gear; it is very nice! It's a great result.

Landlubber Mike
Thank you very much Jennifer!

Michael Kohl
Time to replace the teaser picture with one of your build. 🙂

Landlubber Mike
That might jinx me!

Michael Kohl
Oh yeah. You gotta be super-careful with that. This site is full of black magic. Pssst. Between us: I know for sure because it's the only explanation how some guys here achieve their otherworldly results.
Happy modelling - but watch your back 😉

Landlubber Mike
Yeah, I know what you mean. Some people here are ridiculously talented!

I ended up finishing the JRS-1 tonight. Finally pictures in my album. And Michael, I did replace the teaser picture with my final build - now that it's done and stored in my glass case, much less risk of jinxing myself!

gorby
WOW Stunning result Mike!
Looks like you might be one of those ridiculously talented people. 😉

Guy Rump
Excellent modelling. 👍