Newsfeed

Robert Podkoński
Taking a seat, of course!
(Perhaps the transparencies and propellers from this kit would work:
Soviet Tu-2 Bomber (HobbyBoss 80298, 1:72))

Thomas Kolb
Thank you Robert! The three-bladed standard propellers in the kit are actually fine, it is the transparencies I am a bit worried about.

Łukasz Gliński
Me 2, must watch this - wondering how good/bad this kit is

Dave Flitton
Watching!!

J35J
Me 3, this will be another great build to follow.

Cuajete
Me 5!
I still don't understand why they haven't released a more updated tool for this model yet.

Moreno Baruffini
Thomas, you are a specialist in reminding me the models I started and non finished (yet)! Super inspiring, and a great build to follow for sure!

Thomas Kolb
Dear friends, thank you for your interest. I am a bit curious myself how this model will turn out - I have read some pretty nasty things about it in reviews, but I am not sure it's so bad. It certainly looks very intricately designed, not your usual shake 'n' bake kit for sure.

Gergő Takács
Thomas, you are doing always the same project what I want to do in the future with the same kits. 😀 I'm always taking a seat and save your work for motivation.

Finn
I'm in

Łukasz Gliński
Thomas, your tutorial is priceless! 👍

Mr D
Like this 👍👍
Big fan of soviet n russian stuff, will have to look up history on this one as new to me.
Interesting subject, Nice 😁

Cuajete
Good start, Thomas. Thank you so much for your tutorial 👍

Thomas Kolb
I must say, I am pretty impressed with this kit so far. At first sight it looked like an Amodel kit, but everything is very cleverly designed and all parts fits together beautifully without any problems. The only gripe I have is with the plastic itself - it's very soft and stretchy and definitely does not like to be sanded.

Nicolas
Nice start, joining.

Живко Джаков
I'm here too. I have one in a box and we only see each other with it 🙂

Cuajete
Great job so far, Thomas 👍
I never bought this kit because I thought it would be difficult to deal with.

Thomas Kolb
Cuajete, I must say, I am pretty impressed with this kit so far. At first sight it looked like an Amodel kit, but everything is very cleverly designed and the parts almost fall together by themselves without any problems. The only gripe I have is with the plastic itself - it's very soft and kind of stretchy, and all sanding needs to be followed by polishing to result in a smooth surface.

Cuajete
Thanks, Thomas. I'll have to consider buying the latest ICM box 👍.

Bas Tonn
I'll take a seat. Big fan of this helicopter and its variants.

Finn
Following

Nicolas
Following

Łukasz Gliński
Wondering how good this kit is, will follow

servalpe
@Lukasz, this kit is not bad. I have done some scratch, like seat belts, collective pitch levers, panel and console due to missing details on cockpit. The Hobby Boss SH/HH-60 family is the good one 😉

Ekki
Watching.

Villiers de Vos
Nice work on the instrument panel. very nice progress.

Michael Kohl
which version are you going for?

servalpe
@Michael. UH-60A with desert scheme - Gulf War»Operation Desert Storm.

Stephan Fässler
Love it

Cristian A
Nice, taking a seat

Mr D
Coming along nicely, like the extra touches you have done, HB can simplify a bit.
I just purchased the Zvezda Mi-8, will be my first helli.
Top stuff will keep an 👀 on this build.
😀👍👍

Finn
Following

Jennifer Franklin
me too

Dietmar Bogatzki
taking a seat

Landlubber Mike
Thanks guys! Hope I make it worth your while!

Nicolas
Following

Neil
Me too 👍

Landlubber Mike
Welcome aboard Nicolas and Neil! Thanks for your interest.

Lochsa River
have to sit in...this is in the stash...I was looking at it yesterday...

Lochsa River
A tip...others who built this kit had trouble around the cockpit....

Guy Rump
Following! 👍

Carlo
Nice, a flying boat. Hope this(or Sword) kit gets re-issued one day soon..

Alec K
Taking a seat.

Landlubber Mike
Thanks for following guys. Lochsa, you're right about the canopy. There are fit issues in general with this kit - most of which aren't too difficult to deal with - but the canopy is a bit of a mess. I'm not really looking forward to that part of the build.

Robert Podkoński
Taking a seat here too!

Landlubber Mike
Thanks for joining Robert!

Michael Kohl
Didn't know the subject, like the projekt, love to follow.

Landlubber Mike
Thanks Michael - glad to have you along!

Ben M
💺

Zbynek Honzik
Taking a seat!

Landlubber Mike
Thanks Ben and Zbynek, welcome aboard! Thanks for looking in!

Alec K
Nice detailing and progress 👍

Transall NG
A nice and strong landing gear !

Landlubber Mike
Thanks guys! Transall, it seems a lot stronger than the kit parts which were made from pretty thin plastic.

Pietro De Angelis
Beautiful work, congrats!

Landlubber Mike
Thank you Pietro! Still a long way to go. In the middle of priming the fuselage and having gap and other problems popping up. This is the build that never seems to end 🙁

gorby
Amazing work on the landing gear.

Landlubber Mike
Thanks Gorby! This was my first time trying to scratch build landing gear. Took me probably 20 hours 🙁 I ended up using Albion Alloys brass tubing for a lot of it, along with music wire, copper wire, plastic tubing, and other materials. I've bumped it a few times already and it is very stable so fingers crossed it makes it to the finish line!

Mr D
Nice 😀👍 a water-bird , nice work and like the extras

Desert Marlin
The REEDOAK 3D Printed Pilots are awesome!

Desert Marlin
This project will have both pilots on the intercom and watching the engine startup process. That is why the same type figure is used in both cockpits. They both monitor the engine to ensure that the EGT and RPM is increasing appropriately. Each has their hand on the control stick to be able to open their MIC as they confirm everything is normal at start. The plan is to have the aircraft loaded with a Nuke (Apache Cruise Missile?). Seems appropriate to me for the days we live in now...

Desert Marlin
Have to pause this one until I get the BIG ED kit #33216...

Treehugger
Maybe go for resin seats as well?
Seems like kit plastic never can compete with resin seats. 🙂

Though, I no longer crave for resin interior for the cockpit because of the work, but seats are ok.

Desert Marlin
I'll paint these up and see if I can tolerate them. If they are too bland, I have time to change my mind! Thanks for the idea!

Desert Marlin
Great video of the weapon that goes with this version of the Mirage 2000N

Youtube Video

Desert Marlin
Time to return to the 2000N... Let's Nuke something!

Desert Marlin
I got the ResKit Mirage 2000N Cockpit Set (Detailed Version).

Desert Marlin
As I have begun work on this kit, I am yet again struck by the lack of information in the variations and options provided in the kit. For example, the tail tip is not called out that applies to the 2000N version. While the nose of the 2000D is provided in the kit, it has to be modified to make it correct for the 2000N. Oh bother…

Desert Marlin
Selected "most appropriate" tail tip and mounted the correct nose to fuselage.

Desert Marlin
Okay, now I'm excited to get some paint on this cockpit!!! ResKit, you guys have done some great work with your 3D Resin Printing!

Desert Marlin
I'm back to it!

Treehugger
Oh, did you fiddle with the nose part to make it match the N version, or did you have to buy aftermarket nose for the N version? I have this kit in my stash, but haven't really looked any it yet.

Desert Marlin
I'm using the D nose but converting it to an N version. I'm also closing the "sucker doors" on the inlets to represent an engine that is not yet started... I'm assuming initial hydraulic power is applied from the APU and auxiliary hydraulic pumps have brought the gear door up. I'm going to close the speed breaks for pre-engine start configuration...

Eric Thornton
Looks like BAM has some corrected noses still need the N one. Maybe reach out to him. I could use the corrected nose for this kit also. The Reskit stuff looks amazing.

bam-models.com/produ..2000-corrected-nose/

Desert Marlin
Thanks for the heads up! The BAM nose looks fantastic! Sadly, the 2000N nose has a pitot tube and does not have the RDY antenna lines. It seems that much of the 2000N systems are somewhat earlier than the -5 systems. Everything I can find on the 2000N seems to be somewhat austere compared with the 2000-5. The ResKit cockpit is worth every penny!

Mr D
Like it 😀👍
Nice when the pilot looks like he's actually doing something and engaged with the craft.

Michael Kohl
Watching

Ekki
Me too.

Glynn Jacobs
WOW! That is some AMAZING work on the cockpit (even though you can't see it later!). Just knowing it is in there is inspiring!

Can't wait to get mine done!

Skyhiker
This one is in my stash. Watching with interest.

Mr D
Very nice start, nice aircraft..... designed to give the Soviet's one hell of a firework display.
👍👍