BB-62 USS New Jersey ca. 1984
Details and highlights painted. Also fading and streaking with white, black and blue oil colors
Progress on turret No.2
WIP on the aft. smoke stack
wip on the Harpoon launchers
wip on the armored box launchers
Armored Box Launcher from Infini. 83 PE parts, 5 turned brass parts and 6 hours of work.
Armored Box Launchers from the Pontos set.
Complete set of Harpoon and Tomahawk Launchers. Painted and weathered.
SH-2 from Orange Hobby. All markings are painted by hand as OH does not supply any decals and I could only find low viz decals in my stash. From normal viewing distance you cant tell the difference.
Tamiya and Pontos both provide Sea Hawks. As my New Jersey will be in a 1984 timeframe that is not an option. I'd love to have a Sea King on board, but the only available option don't look to great.
The Phalanxes from Pontos have a stunning level of detail. A wash with black oil paint followed by some careful dry brushing was all that was needed
Oil colors (black and some beige) were used to weather the deck and generate some shadows around the lockers and the CIWS
Some steel beams behind the Harpoon launchers were added from styrene stripes
Necessary corrections on the 5 inch turrets
There is a series of pictures showing New Jersey with SH-2 parked besides the aft turret and a SH-3 Sea King on the landing pad.
I used the old Tamiya kit as starting point and added some details. Markings are mostly hand painted and represent the exact Sea King on board of New Jersey in 1983.
Superstructure below the forward range finder. Besides Pontos PE I added: portholes with covers, 3D printed loudspeaker, some kind of antennas below where the SLQ-32 will be placed, and some doors that are not represented in the Tamiya kit.
Changes to forward superstructure levels 06 to 08.
Changes made to the main mast and radar platform
Changes made to the main mast and radar platform
main mast and radar before painting
superstructure with main mast painted and weathered
superstructure with main mast painted and weathered
Turret No3 done
superstructure with main mast painted and weathered
Turret No3 under construction. As with the other turrets, some modifications were needed.
N.J. stern undergoing some surgery to add the Nixie systems doors.
3D printed Nixie system added to New Jerseys stern.
Some Details added to the aft gun tubs. More Details will be added after painting. There will be a reel with the fueling hose, some oil barrels and other small parts.
Where there have been the forward 40mm guns the deck is covered with circular steel plates. So I cut out the Pontos wood deck and fitted two circles from styrene sheet.
Improvements made to the bow.
Kommentare
29 30 April 2020, 19:37
Ingmar Stöhr
You're welcome! I hope you brought enough beer and chips as this might take a while 😉
An please make sure you keep a safe distance of at least 1.5m.
You're welcome! I hope you brought enough beer and chips as this might take a while 😉
An please make sure you keep a safe distance of at least 1.5m.
1 May 2020, 15:16
Acki
Bin auch gerne dabei, aber den Mindestabstand kannst Du vergessen. Da erkenne ich nichts mehr. 👍
Bin auch gerne dabei, aber den Mindestabstand kannst Du vergessen. Da erkenne ich nichts mehr. 👍
1 May 2020, 15:55
Ingmar Stöhr
Slow progress in the last days because of beautiful weather. Finally managed to finish No.2 turret
Slow progress in the last days because of beautiful weather. Finally managed to finish No.2 turret
23 May 2020, 14:31
Ingmar Stöhr
A few days off and bad weather lead to some progress on this project. Pontos set misses some details and the resin parts are generally excellent. A few show more flash and other minor defects. But still a vast improvement over the kit parts.
A few days off and bad weather lead to some progress on this project. Pontos set misses some details and the resin parts are generally excellent. A few show more flash and other minor defects. But still a vast improvement over the kit parts.
17 June 2020, 07:42
Ingmar Stöhr
I managed to complete all the Armored Box Launchers and the Harpoon Launchers. I even put all my courage together and started the opened launcher from the Infini set. 83 PE parts, 5 turned brass parts, some plastic sheet an 6 hours was all it took to build an amazing tiny detail for New Jersey.
@Joerg: Herzlich Willkommen
I managed to complete all the Armored Box Launchers and the Harpoon Launchers. I even put all my courage together and started the opened launcher from the Infini set. 83 PE parts, 5 turned brass parts, some plastic sheet an 6 hours was all it took to build an amazing tiny detail for New Jersey.
@Joerg: Herzlich Willkommen
19 June 2020, 19:21
Treehugger
The smokestack work in photo 10 looks really nice I think. Fun to see others drilling out the holes in pipes and stuff. 🙂
The smokestack work in photo 10 looks really nice I think. Fun to see others drilling out the holes in pipes and stuff. 🙂
12 July 2020, 17:21
Ingmar Stöhr
How can you not drill out all the pipes. That would be really insane 😉
How can you not drill out all the pipes. That would be really insane 😉
12 July 2020, 17:25
Ingmar Stöhr
Today it was time to finish the four Phalanx CIWS. The detail on the Pontos parts is absolutely breathtaking. A was with black oil and afterwards a careful dry brush with light grey and white is all that was needed.
Today it was time to finish the four Phalanx CIWS. The detail on the Pontos parts is absolutely breathtaking. A was with black oil and afterwards a careful dry brush with light grey and white is all that was needed.
26 July 2020, 13:44
Ingmar Stöhr
Today I managed to complete all the 5 inch guns. The detail on the Pontos parts is superb! Only thing I had to change where the gun mantlets (not sure if that is what it's called for naval guns), as the Pontos parts are way to small.
Today I managed to complete all the 5 inch guns. The detail on the Pontos parts is superb! Only thing I had to change where the gun mantlets (not sure if that is what it's called for naval guns), as the Pontos parts are way to small.
2 August 2020, 11:26
Ingmar Stöhr
Finally some progress to show. I used the old Tamiya kit to replicate the SH-3 Sea King seen on board New Jersey in 1983. I added struts to the wheel sponsons an the fin on the tail boom. The MAD probe on the starboard sponson was made from styrene rod. The tail rotor is made from thin styrene strips. The main rotor came from my own Elegoo Mars SLA printer. The Tamiya rotors look more like bricks...
Most of the markings are hand painted to match the exact Sea King shown in a series of pictures from 1983.
Finally some progress to show. I used the old Tamiya kit to replicate the SH-3 Sea King seen on board New Jersey in 1983. I added struts to the wheel sponsons an the fin on the tail boom. The MAD probe on the starboard sponson was made from styrene rod. The tail rotor is made from thin styrene strips. The main rotor came from my own Elegoo Mars SLA printer. The Tamiya rotors look more like bricks...
Most of the markings are hand painted to match the exact Sea King shown in a series of pictures from 1983.
2 September 2020, 20:01
Ingmar Stöhr
Upper superstructure with main mast and radars assembled, painted and weathered.
Upper superstructure with main mast and radars assembled, painted and weathered.
13 September 2020, 09:00
Spanjaard
amazing job!!! the radar is fantastic. and i really like the SH-2 and Sea King
amazing job!!! the radar is fantastic. and i really like the SH-2 and Sea King
13 September 2020, 11:02
Thomas Rieck
Moin Ingmar. Wie bekommst du auf dem letzten Bild dieses "verwaschene" Grau hin? Lackieren und dann? LG Thomas
Moin Ingmar. Wie bekommst du auf dem letzten Bild dieses "verwaschene" Grau hin? Lackieren und dann? LG Thomas
23 March 2021, 09:14
Slavo Hazucha
Just found this project - fascinating work, so much attention to detail and an absolutely clean results - I really like your painting & weathering weathering too, you strike a great balance between macro & micro and a great scale impression result! 👍
- happy to jump on board mid-project 🙂
Just found this project - fascinating work, so much attention to detail and an absolutely clean results - I really like your painting & weathering weathering too, you strike a great balance between macro & micro and a great scale impression result! 👍
- happy to jump on board mid-project 🙂
23 March 2021, 09:31
Ingmar Stöhr
Thank you Slavo! The project has been on hold for quiet a while now. But hopefully I will get back to it very soon.
Thank you Slavo! The project has been on hold for quiet a while now. But hopefully I will get back to it very soon.
23 March 2021, 12:42
Norbert Steffens
What I've seen looks fantastic. I predict that your USS New Jersey is going to be a excelent model
What I've seen looks fantastic. I predict that your USS New Jersey is going to be a excelent model
25 March 2021, 18:57
Stefan Fraundorfer
Das sieht alles unglaublich genial aus Ingmar. Super Bemalung und Alterung. Nur eine Kleinigkeit ist mir aufgefallen. Die untere Stiege im Bild 36 ist verkehrt angeklebt. Oder hat das einen bestimmten Grund?
Das sieht alles unglaublich genial aus Ingmar. Super Bemalung und Alterung. Nur eine Kleinigkeit ist mir aufgefallen. Die untere Stiege im Bild 36 ist verkehrt angeklebt. Oder hat das einen bestimmten Grund?
9 April 2021, 20:53
Michael Osadciw
Wow. What a lot of detail. How do you like the 3D printer you have? I've been thinking of getting one for creating parts and hopefully full 1/35 scale figs once I get some more Blender sculpting knowledge under my belt.
Wow. What a lot of detail. How do you like the 3D printer you have? I've been thinking of getting one for creating parts and hopefully full 1/35 scale figs once I get some more Blender sculpting knowledge under my belt.
9 April 2021, 22:02
Ingmar Stöhr
Thank you everyone!
@Stefan: Die Treppe hat es auf dem Fotor "nur" nach hinten umgebogen. Da ist schon alles richtig 😉
@Michael: I'm very happy with my Elegoo Mars. For around 250EUR it delivers very nice detail! I did a lot of modeling and sculpting in Blender the last months. Have a look at those two projects:
St. Mary's Church, Falklands April 1982 | Album by stugiii (1:350)
Lighthouse on Cliff 1/350 scale (3D printed) | Album by stugiii
Thank you everyone!
@Stefan: Die Treppe hat es auf dem Fotor "nur" nach hinten umgebogen. Da ist schon alles richtig 😉
@Michael: I'm very happy with my Elegoo Mars. For around 250EUR it delivers very nice detail! I did a lot of modeling and sculpting in Blender the last months. Have a look at those two projects:
St. Mary's Church, Falklands April 1982 | Album by stugiii (1:350)
Lighthouse on Cliff 1/350 scale (3D printed) | Album by stugiii
18 April 2021, 16:41
Ingmar Stöhr
Today I was able to complete the main armament. Turret No3 also needed some modifications to resemble the prototype in the 1984 time frame.
Today I was able to complete the main armament. Turret No3 also needed some modifications to resemble the prototype in the 1984 time frame.
18 April 2021, 16:44
Ed Batres
I'm curious, why are there handrails on the turrets? When would the sailors use them? How do they reach them? I'm primarily an aircraft builder, but appreciate great work. Thanks. Great attention to detail. Pleasure to see the work you do.
I'm curious, why are there handrails on the turrets? When would the sailors use them? How do they reach them? I'm primarily an aircraft builder, but appreciate great work. Thanks. Great attention to detail. Pleasure to see the work you do.
18 April 2021, 16:49
Ingmar Stöhr
Hi Ed, I'm not entirely sure, but most likely they would be used to secure a sailor with a rope when doing maintenance or some paint work. You find similar rails around the whole bridge, e.g. for cleaning windows or repairing something from the outside
Hi Ed, I'm not entirely sure, but most likely they would be used to secure a sailor with a rope when doing maintenance or some paint work. You find similar rails around the whole bridge, e.g. for cleaning windows or repairing something from the outside
18 April 2021, 17:07