DFS 230
Kommentare
26 16 April 2021, 09:39
![](/profiles/img/10148-258-s.jpg)
With these pictures I would like to open the project on the next glider project. RS Models packs extremely helpful etched parts in the box, which help to detail the pilot's seat and the bench in the fuselage well. With all that said: I only added the seat belts to the pilot's seat, as the MG gunner's harnesses hanging from the ceiling behind it will hide the view of the interior as much as possible.
16 April 2021, 09:44
![](/profiles/img/21997-347-s.jpg)
That are really "Glider weeks" on your bench! I think it was not a big fun as "passenger" inside, to not know what to expect on the ground, after only one chance to go down.
16 April 2021, 14:31
![](/profiles/img/10148-258-s.jpg)
Thank you for your feedback!
Indeed, definitely more "economy class"... To be precise: RS includes etched part seat belts, which helped secure the soldiers riding on the beam in the direction of flight. However, definitely nothing of the interior will be visible, neither through the windows nor from the front, as the harness of the MG gunner prevents a view. So I took the liberty of putting them in the spare parts box.
No, I am not planning a dio here. However, I will take the first steps in this direction with the following "glider project": a Me-321 and a Sd.Kfz:9 will play the main roles here.
16 April 2021, 19:17
![](/profiles/img/10148-258-s.jpg)
This is the final equipment - with the fuselage halves closed, it became apparent that there is more insight possible than expected. The harness is from Eduard.
17 April 2021, 09:13
![](/profiles/img/34728-244-s.jpg)
That is the danger of social networks (even scalemates). The pressure of the onlookers which is difficult to resist... 👀
17 April 2021, 09:49
![](/profiles/img/10148-258-s.jpg)
Here, too, something new is happening: a little effort was necessary to sand the fuselage halves and to properly close the various openings. At the end of this step, I anchored pins from a brass rod in their own holes in some places for stability or for the sake of the correct appearance - this mainly concerns the tail construction.
30 April 2021, 17:22
![](/profiles/img/10148-258-s.jpg)
Attaching the wings worked well thanks to the pins. You can see here the unusual proportions of the DFS 230 ready for the application of the underside paint.
2 May 2021, 08:31
![](/profiles/img/10148-258-s.jpg)
Well, a first round of "winter camouflage" - or at least my interpretation of it... I have also applied a little dirt and traces of use. This is supposed to be a well "soiled" specimen.
9 May 2021, 19:20
![](/profiles/img/10148-258-s.jpg)
The third assault glider in this series is finished! The glider shows my interpretation of a winter camouflage as proposed for this DFS 230C of the IV/LLG 1 des by RS-Models. The prototype was flown in 1943. I made sure to apply quite proper dirt marks, as these "pack mules" were indeed used quite heavily.
Thank you for your interest, I hope you like the result!
13 May 2021, 18:10
![](/profiles/img/10148-258-s.jpg)
Thank you Olivier! Indeed, the Horsa is a quite impressive ship!
Especially with the winter camouflage I have my uncertainties. But I think that every machine camouflaged in this way was unique - and so it´s fine for me the way it is 🙂
13 May 2021, 18:18
![](/profiles/img/21997-347-s.jpg)
Really pity, that the nice internal details are mostly hidden - but we all know now it's there 😉
The white stripes are very well done, impressive airbrush work 👍
14 May 2021, 07:07
![](/profiles/img/10148-258-s.jpg)
Thank you all mates for these kind motivations!
Indeed Olivier, I'm going to build two more of ICM's new Gotha 242s in this series, as a finale so to speak. Before that, however, I will continue with a Me 321 Gigant and a second DFS 230, but this one in 1/35th scale from Bronco.
I'm honestly glad you like the winter camouflaged glider!
14 May 2021, 16:27