MiG-3

1
June 9, 2022
2
June 9, 2022
3
June 9, 2022
4
July 18, 2022
Cockpit assembled, and cowling interior parts added
5
July 20, 2022
Exhaust stacks drilled out and added
6
July 20, 2022
Base colors put on interior
7
November 10, 2022
Cockpit completed, Cutting Edge IP installed
8
November 10, 2022
Seat harness and control yoke added
9
November 10, 2022
Fuselage closed up
10
November 15, 2022
Wing parts ready for assembly - more complex than most kits
11
November 15, 2022
Wings installed
12
November 18, 2022
Brass screen added for radiator detail
13
November 18, 2022
Guns assembled and muzzles drilled out
14
November 18, 2022
Rudder, horizontal stabilizers, ailerons, and slats glued into place
15
November 18, 2022
Landing gear struts assembled
16
November 18, 2022
Armament installed
17
November 18, 2022
Radiator painted and installed
18
November 18, 2022
Underside vies, w/test fit of prop
19
November 21, 2022
Armament painted after installation
20
November 21, 2022
Engine cowling glued in place
21
November 21, 2022
Topside construction pretty much complete
22
November 25, 2022
Canopy masked and installed
23
November 25, 2022
Landing gear installed
24
November 25, 2022
Primered and ready for paint
25
December 1, 2022
Underside painted
26
December 1, 2022
Topside base green
27
December 1, 2022
Topside black camo pattern added
28
December 29, 2022
Had problems with Micro Gloss… it does not play well with Gunze Aqueous/Mr Levelling Thinner… had to remove the stuff with 91% isopropyl alcohol and sa
29
December 29, 2022
After repainting where needed, Tamiya Gloss did the trick. Decals are next.
30
January 1, 2023
Decals on, wash started
31
January 1, 2023
All finished, from 1/4 view
32
January 1, 2023
All finished, rear 1/4 view
33
January 3, 2023
34
January 3, 2023
35
January 3, 2023
36
January 3, 2023
37
January 3, 2023
38
January 3, 2023
39
January 3, 2023

Kommentare

31 9 June 2022, 04:27

John
Really nice work! I have the Moscow Air Defence set that includes the MiG-3. Haven't started yet but I'm impressed with the ICM kit. Lots of detail (and fiddly parts). Following this one for sure. 👍

10 November 2022, 23:43

Villiers de Vos
Off to a good start.

11 November 2022, 02:31

Carlos Cisneros
Thanks guys!
@John, watch the fit of those tanks at the front of the cowling. They'll effect the fit of the top cowl panel. Fiddly parts indeed!

11 November 2022, 05:06

Michael Kohl
Convincing start

11 November 2022, 08:36

John
Thanks for the info Carlos. I have heard for these ICM I kits that you can have the engine installed, or the cowling fit, pick one.

11 November 2022, 12:13

Carlos Cisneros
@John. The engine or cowling is certainly the case with the ICM Spitfire. I'm going to test fit the cowl guns to decide if I can install those of not. I hate not to use such parts, and it is such a lovely engine.

11 November 2022, 18:27

John
Nice, almost ready for paint. Doing the box top scheme?

18 November 2022, 22:02

Carlos Cisneros
Thanks John. I'm not going with the box top scheme, but want to do this as one of Alexander Pokryshkin's mounts from 1942.

19 November 2022, 06:32

John
Ouch on the gloss. After some similar mishaps, I just give Tamiya my money and stick with X-22.

29 December 2022, 03:35

Carlos Cisneros
John, I'm leaning in staying with that route. I had used Micro Gloss back in the 90's with no problems, and wonder if they have changed their formula since then. My only worry with Tamiya Gloss is availability at the local shops tends to be very hit and miss with no reliable word on restocks when it's a miss.

29 December 2022, 03:45

John
I hear you. I just grabbed a few bottles last time they had it. I run it about 70/30 thinner/gloss and do several coats so it lasts a while. Check out my paint handling tools album and see how I go through less paint. 👍

29 December 2022, 04:03

Villiers de Vos
Very nice progress.

29 December 2022, 05:52