Vickers 66 Vimy Chinese Aviation Service 1920

1
December 7, 2022
...a decal decision....Early Chinese service using the these Blue Rider decals....all aluminum so this will be a rattle can job....looking forward to the construction and rigging....
2
November 23, 2022
No interior at all in this hybrid kit/airplane with a wing from a bomber and a fuselage made after WWI.....the kit has nothing so a cockpit is under construction...the instrument panel is from the spare box....the seats are from Gaspatch...
3
December 7, 2022
...most parts are ready for prime time but there are still others to do.....the crack in the top wing is not there on the real aircraft and is used by the kit maker to help with the two wing construction....filling it and sanding is out of the question because the wing tips go on late....it will be hidden behind strips of styrene....yup, a model, not a replica...hope no one minds....
4
January 16, 2023
...a rattle can of Tamiya Silver later....
5
January 16, 2023
...the windows will be filled from the inside with clear plastic.....then a background put behind the plastic (there is no interior and no way i will scratchbuild it!)
6
January 16, 2023
...the cockpit is ready for the fuselage to go together.
7
January 16, 2023
...just a note....the molds for the wings of this kit are from 1964.....and it shows...rough for sure.....but, progress made with some eyelets for the rigging added to the wings and walkways around the engines painted black....
8
January 16, 2023
....there is no decal for the horizontal stabilizer flap...and 6 separate painting steps are required...so, the decal sheet was a "painting guide"...nice to know....
9
June 15, 2023
...construction is underway.....and the kits age and the fact it is a hybrid of two other kits....made for some obvious gaps....finished photos of this fellow will not be closeups!
Meanwhile, the wings are ready for mounting and decals....
10
July 9, 2023
...there is a lot going on at the rear stabilizer of this aircraft.....a combination of wires and EZLine....touchup will be needed for sure....
11
August 14, 2023
...the big wing attachment moment...love this SundayNet jig....easy to set the wing angle just right...the top wing segment with engines attached is just roughed in here without glue....this will sit for at least a day to let the glue dry....
12
August 22, 2023
13
August 24, 2023
....it is finally time to turn this over and attach wings........the little set of wheels up front is attached by thinned white glue and will support about nothing....the photos will be very careful with this fragile part....
14
September 2, 2023
...this crack in the upper wing makes for an easier kit assembly for sure but how to deal with it?
...sanding and filing seems like an invitation to making a mess at this late stage....
15
September 2, 2023
....the plan...thin styrene stock painted to match that just covers the crack....solidly a decision in the "it is a model, not a replica" dept...
....gluing will start under the front of the wing and the thin piece will bend over nicely.....hopefully...
16
September 15, 2023
...Very close now after some bands of styrene coverup were applied over the cracks in the wings. Photos will not be featuring the glued sections on the underside of the wing. It worked so it's a winner.

...one more prop and touchup...then dusting and photos...fun trip this was....
17
September 6, 2023
...never throw decals away...these door images are from a Minicraft Spruce Goose kit...from decades later but it works here.....getting close...simple acetate windshield added because the kit piece was a non starter.....
18
January 12, 2024
All Done.....
19
September 15, 2023
20
January 12, 2024
21
January 12, 2024
22
January 12, 2024
23
January 12, 2024
24
January 12, 2024
25
January 12, 2024
26
January 12, 2024
Focus Stack (sometimes called Focus Bracket) of about 15 images.....
27
January 12, 2024
28
January 12, 2024
29
January 12, 2024
30
January 12, 2024
31
January 12, 2024
32
January 12, 2024
33
January 12, 2024

Kommentare

94 23 November 2022, 13:03

Jv
Taking a seat
Always enjoy your builds

26 November 2022, 06:09

Marcin Dudek
Watching 👀

26 November 2022, 15:51

Lochsa River
...if your modeling life simply does not have enough seam scraping and sanding....buy this kit.....several sessions have a dent in it but there is much to do...

the good news? low expectations for great details ......but this project is about rigging anyway...That should be fun...not like scraping and sanding...

28 November 2022, 13:15

Łukasz Gliński
Me 3, v. interesting, not something you see often times.

28 November 2022, 14:17

Robert Podkoński
Me 4! 😉

28 November 2022, 14:28

Lochsa River
a decal decision.....Early Chinese Aviation

7 December 2022, 05:03

Robert Podkoński
The livery you've chosen is fantastic, LR!

7 December 2022, 06:14

Moreno Baruffini
I agree with above, it's always a pleasure to follow your builds!

7 December 2022, 07:15

Lochsa River
welcome, Robert and Moreno....a pleasure to have your company.

7 December 2022, 07:58

LucLuke B
I'll be following. What's not to like in a biplane airliner. A shame there are not more kits of these available.

7 December 2022, 09:41

Łukasz Gliński
Very colourful livery for such an ancient airliner 👍

7 December 2022, 09:52

Finn
Looking really interesting, good start

16 January 2023, 12:07

Lochsa River
it is time to build this fellow...but don't look too close...this is a hybrid kit with old moldings...hopefully, it will be fun to look at when done.

15 June 2023, 06:41

Robert Podkoński
Great job so far. Keep it up!

15 June 2023, 07:07

Jv
Sure it will and iook great

15 June 2023, 07:23

Lochsa River
Thanks mates...it is great to hear from you....

15 June 2023, 07:28

Andy Ball
great eclectic subject Lochsa...I think the final overall look will be a peach!

15 June 2023, 09:14

Живко Джаков
This is an interesting plane!

15 June 2023, 19:17

Lochsa River
my dyslexia really took over at some point while adding control horns to the wings...some went on backwards...all went on the wrong side of the wing/flap intersection....sometimes it even amazes me i can walk in a straight line......the project had to be put on hold while new decals came in....

...bottom line....new slots for the replacement control horns will be made on all the wings and new decals will help hide the damage.....but, honestly, i even messed up with the connections to the tail...one side is higher than the other...dyslexia is my only excuse...hopefully, it will all be decent in the end...

2 July 2023, 08:40

Patryk S.
Joining in! Great job so far!

2 July 2023, 09:12

S M
Interesting history! Following!

2 July 2023, 09:51

Michael Kohl
Anxious for more

2 July 2023, 14:26

Moreno Baruffini
Me too, go on Lochsa, I'm also a bit dyslexic, but every problem can be solved!

2 July 2023, 14:33

Lochsa River
the bottom wing is on....

14 August 2023, 05:02

Roland Sachsenhofer
Fascinating, well: thrilling! Great project I would like to follow, for sure!

14 August 2023, 05:45

Guy Rump
Following. 👍

14 August 2023, 06:42

Mike Grant
Very cool subject and model 👍

21 August 2023, 13:34

Marcin Dudek
Looking grate so far. Can't wait to see the final result😁

21 August 2023, 14:53

David Taylor
Watching

22 August 2023, 14:28

Pierre Pierre
following

6 September 2023, 09:02

Clement
Fantastic work!

15 September 2023, 07:22

Robert Podkoński
Great work, LR!

15 September 2023, 07:36

Marcel Klemmer
Fantastic result. Very remarkable what you conjured up from the basic kit👍

15 September 2023, 08:44

Guy Rump
Great result! 👍

15 September 2023, 08:56

Neuling
Very beautiful! An eyecatcher indeed!

15 September 2023, 09:01

Frank Molnar
Great work 👍

15 September 2023, 09:32

Marcin Dudek
Unique object and grate effect! 👏👍

15 September 2023, 12:45

Łukasz Gliński
Fabulous, huge props for rigging 👍

15 September 2023, 13:52

Roland Sachsenhofer
What an extraordinary and exceptionally successful project! A highly interesting choice of prototype and a highly admirable build - congratulations!

15 September 2023, 16:06

Moreno Baruffini
Really a unique and super result!!!

16 September 2023, 06:28