base de datos de modelismo a escala | gestor de almacén

A-6 "Intruder" , EA-6 "Prowler" wheels set

ResKit | No. RS32-0001 | 1:32

Boxart A-6 "Intruder" , EA-6 "Prowler" wheels set RS32-0001 ResKit

Hechos

Marca:
ResKit
Título:
A-6 "Intruder" , EA-6 "Prowler" wheels set
Número:
RS32-0001
Escala:
1:32
Tipo:
Conjunto para Detallado
Publicado:
2020 Nuevos moldes
Código de barras:
4589913295353 (EAN)
Tema:
Grumman A-6 Intruder » Reactores (Aeronave)

Diseñado para

Este set de accesorios está diseñado para:

 
Trumpeter

Mercado

Tiendas en línea
Logo Plastic Models Store
USD 12.80
UAEn stock »
Logo Super-Hobby.com
USD 16.49
PLEn stock »
Logo Sprue Brothers Models
USD 16.49
USEn stock »
Logo 1001hobbies.com
USD 21.24
FRDisponible »
Logo Hobby.dn.ua
€ 13.52
UA USD 15.29Disponible »
Logo Squadron Hobbies
USD 17.24
USAgotado »
Logo Der Sockelshop
€ 13.80
DE USD 15.61Agotado »
Logo HobbyLink Japan
¥ 1836
JP USD 14.14Agotado »
Logo Plastmodel
zł 61.95
PL USD 16.37Agotado »

SKU alternativos para ResKit RS32-0001:
RS320001 | 32-0001 | RES-RS32-0001 | RESRS320001

Nota: Los precios y la disponibilidad son sólo indicaciones. ¡Compruebe si el producto realmente coincide!

Revisiones de caja

Reseñas externas

No conocemos ninguna revisión de caja para esto A-6 "Intruder" , EA-6 "Prowler" wheels set (#RS32-0001) desde ResKit.

Comentarios

Jon Somerville
The holes for the wheels do not line up for the only kit in 1/32. My guess is that these are accurate to the real thing and not designed to fit the kit. So which do you prefer? I would have liked to see if fit the kit. Used drill bits to match a fitting hole to the original wheel parts and then drilled out the resin. The cut line to remove the casting block for the front wheels are correct, but not the mains.
All comments (10) » 1 19 April 2021, 15:43
Jon Somerville
I bought the MERs from ResKit. That was the one thing I was glad about that I waited so long before finishing the kit. Toyed with the idea of fixing the tail comb myself, but was going to be too much work for only a little gain.
Other issues with the kit is where the aft side of where the nose gear joins the fuselage is way to deep into the gear bay. The wing fences are not in the correct spot and the fuselage has way too many rivets. I filled the rivets where needed. If they ghost a bit, that's okay too.
19 December 2023, 13:44
Jon Somerville
Now that I re-read the last line in the review should really be "The cut line to remove the casting block for the front wheels hubs is correct, but not the mains." So referring to the hubs not the wheels themselves.
25 January, 17:38

Material de referencia

A-6 Intruder (Detail & Scale 7)
A-6 Intruder In U. S. Marine Corps Service and Navy Test & Evaluation Squ...
Colors & Markings Series No. 7
Rock Roszak, Mike Heideman
2023
A-6 Intruder and Prowler Part 7 (Aero Research 1111)
A-6 Intruder and Prowler Part 7
Military Series No. 1111
2022 Digital

Todos los libros » (26 en total) Todos los walkarounds » (15 en total)