Noticias

Roland Sachsenhofer
First pictures of the first steps in the construction of a B-17G, whose mission role particularly appealed to me: I had long been fascinated by the sea rescue missions of this B-17 equipped with a droppable lifeboat! So I was delighted when I found one of the rare kits on the subject here on scalemates.
A few months ago I had already built an Academy 'Flying Fortress' in an early B version, the kit qualities of which I thoroughly enjoyed. The accuracy of fit is not far from 'perfect' and the details that are often missing in these Academy kits have to be added wherever it is important. In this case that means A set of etched parts for the cockpit and nose area, as well as an exterior set, especially for the engines and undercarriage, and resin tyres, also from Eduard. Not to forget: the seat cushions from Kits World were used in the cockpit

Łukasz Gliński
Lucky you! Following

Finn
I'm in

Roland Sachsenhofer
That makes me happy, Łukasz and Finn!
The SB-17G is slowly taking shape. The V-position of the wings needs to be changed: in my opinion, Academy has set a much too steep angle here! The corrected position of the wings also results in the distances at the wing-fuselage bonding points.... the fit here would be excellent!

Juergen Klinglhuber
following 👍

Roland Sachsenhofer
Das freut mich! 🙂

Roland Sachsenhofer
In preparation for the surface colours, I have now done the following: I have masked those stripes over the black primer that are to remain visible as black lines separating the NMF surfaces from the large yellow zones using suitably wide Tamiya masking tape. I also masked the areas on the leading edges that carry the rubber 'de-icers'.
Next, the anti-glare areas in front of the cockpit and on the inside of the engine nacelles are sprayed, then.... then come the Alclad metal colours!

Cuajete
Great! 👍

Roland Sachsenhofer
Thank you!
There was not much to see of the SB-17 for a short time - the application of the yellow required extensive masking!

Villiers de Vos
Very nice progress. I hope that there is no bleeding with that yellow paint 🙂

Robert Podkoński
Somehow I have missed this build... But I will follow from now!

Roland Sachsenhofer
Thank you Villiers and Robert! Indeed, I had to sand over the colour edges a little....

Roland Sachsenhofer
At last I can replace the unattractive sanitary towel pictures of the SB-17 with ones that show their true appearance! 🙂
The new pictures are already close: the high gloss level comes from the sealing of the decals.... now it will be adjusted with different clear coats.

Cuajete
Very nice painting job so far 👍

Roland Sachsenhofer
Thank you, Cuajete!

Łukasz Gliński
Love that colours, waiting for the details

Łukasz Gliński
I have to watch this

Michael Kohl
Lukasz, of course you have to watch this.😉
Feel warmly welcomed.

Maciej Bellos
I have to watch also! Could you show us a photo of the decals? When were the decals produced?

Robert Podkoński
Joining the party, of course! 😉

Michael Kohl
My friends. I am really happy to have you around as I was sincerely hoping that this build will arouse the interest of the three of you.
Maciej, are you referring to the kits decals or the ones from RSmodelle. Concering the latter, I cannot tell you, as I have not received them yet.

Maciej Bellos
I have the kit, courtesy of Robert.

I was referring to the BSModele decals, as masking the scheme was really challenging and, ehm, painful!

Michael Kohl
Here us the link to the decals at their homepage:

[img1]

Looking at them, I am afraid some decent masking is still ahead of me.

Maciej Bellos
Thank you Michael! It looks that masking is needed indeed...

Bernd Grün
Nice start, Michael. Following!

Robert Podkoński
Good job so far, Michael! (you can find some walkaround photos in my albums, if you wish to 😉 )

Guy Rump
Looking good. 👍

Michael Kohl
Wellcome Bernd and Guy.
Robert, thank you for the invitation. I already helped myself. 🙂
And thanks folks for your likes. Motivates even further.

Michael Kohl
Today the decals arrived from Ukraine.

Łukasz Gliński
Progressing very well. I hope the pilots don't mind being polished 😛

Michael Kohl
🙂 they didn't complain. That was enough confirmation for me. 😉

Michael Kohl
Thanks mates for your interest and the likes. Hopefully I will be able to progress this build soon.

Isaac Kite
Taking a seat. The Iskra is a sexy plane, no idea why the Delfin won that contract. Let me guess. Political elimination? Regardless, looking forward to watching this develop.

Michael Kohl
Funny. Just the evening before your comment, Isaac, I dusted them planes and finished the cockpits. Let's move on.

Isaac Kite
*thumbs up*

Michael Kohl
Took them out of the shelf another time. Quite a bit of sanding had to be done. Particular the inner rear area of the wing where the box of the intakes tapers towards the trailing edge of the wing is much to thick in the kit. A bit of elbow grease was required there.
A fresh comparison with a machine in flight revealed some more issues I adressed. So, some more filling and sanding. Now I gotta wait till my trusted Mr. Hobby primer sets properly.

DerMattes
Looks great so far 👍

Raphael Bernecole
Very Nice : following ! 😉

Łukasz Gliński
Good to see you back with this duo

Michael Kohl
Welcome (back) mates.

Mr D
Cockpit's are really good 👌👍👍

Alec K
Taking a very, very belated seat. Great project, had a few chuckles reading your captions 😄

Mr D
At least all the preflight checks will be done with German pilots 🤣 just keep them away from Starfighter be ok 😁.
Looking good nice fun project... Cockpit is great,
I use "Nail liner brushes" for cockpit n detail work... there used in beauty parlours for Painting pictures on nails.... There quite cheap and much more accurate than most fine paint brushes out there. 6 or 7mm best.
Good luck with next steps 😃👍

Michael Kohl
Hi Mr D and Alec K. Welcome.
@Alec: I deliberately take loooong brakes with this project so thay even the slowest out there can catch up 😉
@Mr D: I will look out for them nail liner brusher and see if they might serve my needs. I have tons of brushes but 90% of my hand painting is done with Winsor & Newton No. 7 Size 2. Hurts when you buy them, but they are of an incredible quality.

Michael Kohl
The main filling and sanding job done on one of the birds. A handful of details will be added before the final prepaint sanding. The canopy needs some work too. The frame of it is too coarse and will be sanded (almost) flush. Apart from that are there fit issues at the windshield that need to be addressed.

Nicolas
Missed this one, following.

Michael Kohl
Welcome. 🙂

Zoltan Grotz
Top Job👍👍👍

bughunter
Regarding your template in picture 32: some bigger PE sets from Eduard has such drops of different sizes on the frames. Here an example of six sizes left and right:
[img1]
Great work as usual 👍

Michael Kohl
Thanks Zoltan.
Danke Frank for the hint. I realised those templates before but haven't used them yet.
By the way: how do I add a picture to a comment? I tried before but it didn't work. Must be doing something wrong.

Łukasz Gliński
You need to paste the image link, but it doesn't always work
[img1]

Michael Kohl
Ah. I wanted to add an image from my harddrive. How does that work?

Spanjaard
you need to upload the picture somewhere (share images website, scalemare album....), and then copy and paste link to that location in your post. you can not of course use a link to your local file

Michael Kohl
Ah, ok. Got that. Thanks for the hint.

Łukasz Gliński
I have created special folder for that in here and I disabled the comments for it, so it doesn't pop up in the news feed every time I upload something.
The thing is I forgot how to repeat that process 😄
Other stuff | Album by Woody
[img1]